Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior to entry of the engine - increasing performance, as well as improving throttle response and fuel efficiency.
Now your 19-20 Silverado/Sierra can perform and sound as good as it looks with this aFe POWER Vulcan Series cat-back exhaust system. 4inch to dual 3inch mandrel-bent, 304 stainless steel tubing and high-flow muffler improves performance across the power band and delivers a deep, aggressive exhaust tone. 100% MIG-welded for strength and durability. Quad 4inch polished 304 stainless steel exhaust tips for an aggressive custom look.
4inch to Dual 3inch 304 Stainless Steel Tubing:
This system is constructed of durable mandrel-bent 4inch to dual 3inch 304 stainless steel tubing for maximum corrosion resistance. Mandrel-bent tubing for maximum air flow and low turbulence; increasing torque, horsepower and improved throttle response.
High-Flow Performance Muffler:
A single-in, dual-out high-flow stainless steel muffler allows increased exhaust flow and reduces exhaust drone, maintaining a deep, tuned sound.
Quad Polished Tips:
Quad 4inch polished 304 stainless steel exhaust tips replace the factory tips for an aggressive, custom sport truck look.
Perfect Fit:
Factory-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions for a secure fit.
Hassle-Free Installation:
Quality hardware and clamps are included for a hassle-free installation.
It may be necessary to cut the OE Exhaust to remove it from the vehicle.
Now your 19-20 Silverado/Sierra can perform and sound as good as it looks with this aFe POWER Vulcan Series cat-back exhaust system. 4inch to dual 3inch mandrel-bent, 304 stainless steel tubing and high-flow muffler improves performance across the power band and delivers a deep, aggressive exhaust tone. 100% MIG-welded for strength and durability. Quad 4inch black 304 stainless steel exhaust tips for an aggressive custom look.
4inch to Dual 3inch 304 Stainless Steel Tubing:
This system is constructed of durable mandrel-bent 4inch to dual 3inch 304 stainless steel tubing for maximum corrosion resistance. Mandrel-bent tubing for maximum air flow and low turbulence; increasing torque, horsepower and improved throttle response.
High-Flow Performance Muffler:
A single-in, dual-out high-flow stainless steel muffler allows increased exhaust flow and reduces exhaust drone, maintaining a deep, tuned sound.
Quad Black Tips:
Quad 4inch black 304 stainless steel exhaust tips replace the factory tips for an aggressive, custom sport truck look.
Perfect Fit:
Factory-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions for a secure fit.
Hassle-Free Installation:
Quality hardware and clamps are included for a hassle-free installation.
It may be necessary to cut the OE Exhaust to remove it from the vehicle.
High Flow 409 Stainless Steel Muffler:
This 409 stainless steel High-Flow muffler is designed to provide a deep throaty, powerful sound on acceleration, but maintain a smooth sound at idle. This muffler is constructed uses a straight through perforated core with heat resistant packing to reduce backpressure and maximize flow. Also featuring a stamped aFe POWER logo for an added style. Muffler Specifications: 4" Center Inlet /Outlet, 8" Round x 24" L Body Diameter.
OE Fit:
Features OE-style bayonet hangers to maintain stability during high-rev vibration and high-temp conditions. Provides hassle-free installation.
Flow and Performance:
This Rebel XD exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and throttle response.
Exhaust Tips:
Finishing off this exhaust are dual 5" black stainless steel straight-cut intercooled exhaust tips featuring a laser-cut stainless steel "aFe POWER" badge for added style.
Fits:
2017 Chevrolet Silverado HD 2500/3500 V8-6.6L (td) Duramax
2017 GMC Sierra HD 2500/3500 V8-6.6L (td) Duramax
Wheelbases:
Extended Cab/Short Bed, 6.6 ft. Bed, 143.5 Wheelbase
Crew Cab/Short Bed, 6.6 ft. Bed, 153.7 Wheelbase
Extended Cab/Long Bed, 8 ft. Bed, 158.1 Wheelbase
Crew Cab/Long Bed, 8 ft. Bed, 167.7 Wheelbase
Note 1:
Cutting is required for some cab configurations.
Unique One-Piece High Quality Housing:
The smooth one-piece high quality plastic sealed housing is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style.
High Quality Tube:
This system uses a high quality cross-linked polyethylene plastic computer designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Two CNC machined, high quality billet aluminium fittings are mounted on the tube to provide a perfect connection with the factory vacuum lines.
Huge 5-Layer Performance Air Filter:
The Momentum GT intake is designed around a pre-oiled, large 9" Tall conical inverted top 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.
Premium Hardware:
A premium stainless steel T-bolt clamp and a polyurethane coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.
Maintain your air filter's optimal performance with regular cleaning and oiling, which is recommended every 40-50k Ks.
For Pro 5R and Pro 10R Air Filters:
This Restore Kit was specifically developed for aFe POWER's Pro 5R and Pro 10R air filters. The POWER CLEANER effectively breaks down dirt and dust without damaging the media, while the oil captures debris during use.
Restoring Air Filters:
Simply apply the cleaner onto the filter element, let it soak, and rinse. Once dry, the oil can be applied. Take care to not over-oil the filter. Refer to the instruction sheet for more information.
This BladeRunner GT Series Intercooler kit represents the next generation of intercoolers. The BladeRunner intercoolers utilize a 3" bar and plate core design that is larger than stock. This kit outflows the OE intercooler set up for more power.
End Tanks:
The unique BladeRunner end tanks are constructed out of 3/16'' TIG-Welded aluminum plates.
3" Bar and Plate Core Design:
The use of the bar and plate core design allows for greater airflow.
Billet Aluminum Inlet/Outlets:
This BladeRunner Intercooler uses 3" inlets and outlets for superior strength and durability..
TIG-Welded:
100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.
Condensation Drain:
The intercooler includes a 1/8" NPT vent, which can be used to drain any type of build up from the intercooler.
Perfect Fit:
Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes high quality stainless steel spring loaded t-bolt clamps and heavy-duty 5-Ply couplings for strength.
Flow and Performance:
aFe Power's intercooler tube are constructed from 3" mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tube from engine heat and protects the tube from corrosion. The smooth transition bends decrease turbulence, minimize pressure loss, while increasing horsepower and torque. Also included is four 1/8" NPT port which is provided for a sensor or water-methanol injection.
aFe Badging:
A unique laser-cut aFe power logo plate is welded-onto the intercooler tubes for an aggressive style.
Power, quality and sound is what this Large Bore-HD series down-pipe back exhaust system offers. 4" mandrel-bent 409 stainless steel tubing and high-flow muffler are less restrictive keeping exhaust pulses flowing smoothly for increased power gains. High-temp black powder coated stainless steel exhaust tip completes the look. Factory style hangers, quality band clamps and all necessary hardware ensure a quick install and long-lasting exhaust that looks as good as it performs.
Flow and Performance:
This Large Bore-HD exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum flow and longevity. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lower EGT's.
High Flow 409 Stainless Steel Muffler:
This 409 stainless steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration, but maintain a smooth sound at idle. Stamped with an aFe POWER logo for an aggressive style. Muffler Specifications: 4" Center Inlet /Outlet, 8" Round x 24" Length Body.
6" Diameter Black Tip:
This system is finished off with a 6" high-temp. black powder-coated slash cut tip. A unique laser-cut aFe Power logo plate is riveted on for a custom, quality finish.
OE Fit:
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.
Fits: CC/SB (151.6" Wheelbase/6.6ft. bed)
With five layers of progressively finer mesh cotton gauze media between 100% polyurethane top and base, this high flow oiled conical performance filter provides excellent airflow for maximum horsepower and torque. Washable and reusable for multiple cleanings, the tall, open, evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Pliable polyurethane flange with integrated bumps insures tight, no leak seal over the life of the filter.
3inch 409 Stainless Steel Construction:
This cat-back exhaust system is constructed of 3inch mandrel-bent 409 stainless steel tubing for maximum strength and durability.
High-Flow Stainless Steel Muffler:
This system features a high-flow 409 stainless steel muffler, producing a throaty sound.
Dual 5inch Diameter Black Exhaust Tips:
Finishing off this exhaust system are dual 5inch diameter black stainless steel clamp-on exhaust tips. The tips features an aFe POWER logo plate riveted on for a unique style.
Installation:
Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.
Computer-Aided Design:
Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.
MIG-Welded:
MIG-Welded for race-proven strength and durability.
Fitment Note:
Will not fit models equipped with factory single exhaust system.
Our Twisted Steel long tube header and y-pipe added an astounding +32 HP and +44 lbs. x ft.
Twisted Steel Long Tube Headers Features:
Y-Pipe (Street Version) Features:
aFe is proud to introduce the MACH Force XP Cat-Back exhaust system for the 2009-2017 Dodge/RAM 1500 with the V8-5.7L HEMI engine. This exhaust system outflows the factory exhaust by 130%. This cat-back exhaust is constructed of 3" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with dual gloss black 304 stainless steel, double wall slash cut tips for an aggressive style.
Installation is a Snap:
This MACH Force XP exhaust system use all factory mounting locations providing stability and a hassle-free installation.
Leak-Free Seal:
High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths.
Aggressive Sound:
A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.
Perfect Fit:
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
aFe is proud to introduce the MACH Force XP Cat-Back exhaust system for the 2009-2017 Dodge/RAM 1500 with the V8-5.7L HEMI engine. This exhaust system outflows the factory exhaust by 130%. This cat-back exhaust is constructed of 3" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with dual gloss black 304 stainless steel, double wall slash cut tips for an aggressive style.
Installation is a Snap:
This MACH Force XP exhaust system use all factory mounting locations providing stability and a hassle-free installation.
Leak-Free Seal:
High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths.
Aggressive Sound:
A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.
Perfect Fit:
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
In recent testing, the Street Version produced +33 HP and +30 lbs. x ft. TQ on our in-house dyno (tested on a 2014 Toyota Tundra V8-5.7L).
Headers:
Connection Pipes: