Cold Air intakes designed and engineered to minimise air restriction and maximise flow for Ram, Chevrolet, and Ford Trucks!
fullscreen fullscreen_exit done_all launch
  • CARGOGLIDE / CARGO DRAWERSexpand_more
  • Show All
  • FLOOR MATS AND LINERSexpand_more
  • Show All
  • SPORTS BAR / ROLL BARSexpand_more
  • Show All
  • TUB LINERS / BED LINERSexpand_more
  • Show All
Chevrolet 1500 2019-2023 V8 6.2 Ltr S&B Cold Air Intake 75-5128-1
zoom_inchevron_leftchevron_right
Chevrolet 1500 2019-2023 V8 6.2 Ltr S&B Cold Air IntakeS&B FILTERS
$1,299.00
75-5128-1
check_box_outline_blankShow Comparison

MORE AIRFLOW.
MAXIMUM PERFORMANCE

Our cold air intake for the 2020 Silverado 6.2L was engineered to minimize air restriction and flows 51.69% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

A MONSTER SIZED AIR FILTER

Featuring a massive, highly efficient air filter that snaps into the airbox easily and securely, providing an airtight seal. With our new snap in filter design, you can install and inspect your filter in seconds. Available in either 8-layer Cotton Cleanable or Dry Extendable media.

NEW SNAP IN LID DESIGN

Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim ensures an airtight seal, protecting against unwanted, power-robbing engine heat.

MAF HARNESS EXTENSION

The Mass Airflow Sensor is relocated further down the S&B intake tube allowing for further airflow improvements. We got you covered with our included MAF extension harness.

PREMIUM SILICONE COMPONENTS

The air filter, coupler, lid seal and plug seal are all made with silicone. Silicone is a premium rubber which will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.

THE SOUND
OF PERFORMANCE.

Check out the sound of the intake when installed in the truck. A huge air filter and air box results in a more aggressive sound compared to stock.

New
bookmark
Chevrolet 2500 2017-2019 6.6L Cold Air Intake S and B Filters 75-5144
zoom_inchevron_leftchevron_right
Chevrolet 2500 2017-2019 6.6L Cold Air Intake S and B FiltersS&B FILTERS
$1,299.00
75-5144
check_box_outline_blankShow Comparison
Our cold air intake for the 2017-2018 Silverado / Sierra Duramax 6.6L was engineered to minimize air restriction and flows 43.86% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor.
Chevrolet 2500 2020-2023 6.6L Duramax  Cold Air Intake by S and B Filters 75-5136
zoom_inchevron_leftchevron_right
Chevrolet 2500 2020-2023 6.6L Duramax Cold Air Intake by S and B FiltersS&B FILTERS
$1,299.00
75-5136
check_box_outline_blankShow Comparison

Airflow Improvement: +51.83%

Efficiency Rating: 99.05%

MAXIMUM PERFORMANCE

Our cold air intake for the 2020-2021 Silverado / Sierra Duramax L5P 6.6L was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

NEW SNAP IN LID DESIGN

Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim provides a protective seal against unwanted, power-robbing engine heat and debris. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.

PREMIUM SILICONE COMPONENTS

The air filter, coupler, lid seal and box plug are all made with silicone. Silicone is a premium rubber that will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.

CHOOSE YOUR AIRFLOW

More air equals better performance. The Duramax L5P 6.6L intake features three air inlet points. If you want to customize the amount of air you take in, we provide an optional box plug that can seal off one inlet point.

NO CHECK ENGINE LIGHTS

S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor.

REQUIRES MODIFICATION DUE TO CONVERSION

New
bookmark
Ford F150 2015-2017 5.0L Cold Air Intake S and B Filters 75-5083
zoom_inchevron_leftchevron_right
Ford F150 2015-2017 5.0L Cold Air Intake S and B FiltersS&B FILTERS
$1,299.00
75-5083
check_box_outline_blankShow Comparison
Our cold air intake for the 2015-2016 Ford F-150 5.0L was engineered to minimize air restriction and flows 40% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.
Ford F250 2020-2022 6.7L Powerstroke Cold Air Intake by S and B Filters 75-5140
zoom_inchevron_leftchevron_right
Ford F250 2020-2022 6.7L Powerstroke Cold Air Intake by S and B FiltersS&B FILTERS
$1,299.00
75-5140
check_box_outline_blankShow Comparison

Airflow Improvement: +39.05%

Efficiency Rating: +99.42%

MAXIMUM PERFORMANCE

Our cold air intake for the 2020-2022 Ford 6.7L Powerstroke was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

NEW SNAP IN LID DESIGN

Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy, as the filter can be installed and removed without having to remove the intake tube. Our silicone edge trim provides a protective seal against unwanted, power-robbing engine heat and debris. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.

LESS RESTRICTION.
MORE AIRFLOW.

The Intake Tube has minimal bends as it connects to the turbo inlet. It is positioned in one clean line with minimum obstructions from the turbo inlet to the intake box and air filter. This results in a decrease in restriction compared to stock.

CHOOSE YOUR AIRFLOW.

The 75-5140 intake kit has (2) airflow configurations. S&B includes a silicone box plug that can be installed or removed depending on personal preference and airflow requirements. 

NO CHECK ENGINE LIGHTS

S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. An injection molded MAF plate in conjunction with a foam MAF sensor gasket ensures a true OE seal to the sensor.

New
bookmark
Ford F250, F350 2017-2019 Powerstroke 6.7L Cold Air Intake S and B Filters 75-5085
zoom_inchevron_leftchevron_right
Ford F250, F350 2017-2019 Powerstroke 6.7L Cold Air Intake S and B FiltersS&B FILTERS
$1,299.00
75-5085
check_box_outline_blankShow Comparison
Our cold air intake for the 2017-2018 Ford Powerstroke 6.7L was engineered to minimize air restriction and flows 55.97% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.

We swapped the location of the intake box and battery, allowing our intake to not only be closer to but also directly in line with the front air inlet. Additionally, our intake tube has minimal bends as it connects to the turbo inlet. These details result in a signifcant decrease in restriction compared to stock intake.
Polaris RZR Pro R 2022-2023 2.0L Particle Separator by S and B Filters 76-2018
zoom_inchevron_leftchevron_right
Polaris RZR Pro R 2022-2023 2.0L Particle Separator by S and B FiltersS&B FILTERS
$1,399.00
76-2018
check_box_outline_blankShow Comparison

HUGE AIRFLOW, WHILE STILL KEEPING YOUR FILTER CLEAN!

How much dust will it separate?
The Particle Separator 2 for the RZR Pro R will separate at least 94% of the dust just like it does on other vehicles. With less dust on your filter, your engine will produce more power.

How about airflow?
Since this UTV has a more powerful engine, we have added more of our patented vortexes, so that your vehicle gets all the airflow it needs to maximize performance.

MOUNTS UNDER THE FENDER.

The Particle Separator 2 for the RZR Pro R 2.0L will be a self contained unit that is mounted under the fender on the driver side. By self-contained, we mean that the housing itself will be assembled and tested at our factory thus avoiding any potential mating errors in the field. As with all S&B products, this unit will look like it shipped from the Polaris factory.

MAINTAIN POWER THROUGHOUT YOUR RIDE.

Don't let the elements slow you down. A clogged filter chokes your engine of power. The Particle separator lets you play in the snow and other harsh conditions, as it was designed to protect from water, snow, sand and fine dust.

WHISPER QUIET FAN TECHNOLOGY. LISTEN TO MUSIC & TALK IN PEACE.

The Particle Separator for the RZR Pro R comes with an automatic variable speed scavenge fan. When you're at idle or the vehicle's RPM is low, the fan speed is lower allowing you to talk and listen to music without hearing the fan. Once you hit the gas, the scavenge fan instantaneously accelerates to provide maximum protection for your filter. It's the best of both worlds.

MAXIMUM HORSEPOWER!

Running the S&B Particle Separator is less restrictive than running without one. There is no loss of horsepower because your filter is not getting bogged down with dirt and debris, resulting in less restriction and maximum airflow. Just what a race-tuned UTV needs.

Ram DJ2 2500 2019-2023 Cummins 6.7L Cold Air Intake by S and B Filters 75-5132
zoom_inchevron_leftchevron_right
Ram DJ2 2500 2019-2023 Cummins 6.7L Cold Air Intake by S and B FiltersS&B FILTERS
$1,299.00
75-5132
check_box_outline_blankShow Comparison

Airflow Improvement: 40.63%

Efficiency Rating: 99.89%

MAXIMUM PERFORMANCE

Our cold air intake for the 2019-2021 Ram 2500/3500 6.7L was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

NEW SNAP IN LID DESIGN

Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim provides a protective seal against unwanted, power-robbing engine heat and debris. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.

PREMIUM SILICONE COMPONENTS

The air filter, coupler, lid seal and box plug are all made with silicone. Silicone is a premium rubber which will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.

NO CHECK ENGINE LIGHTS

S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights. Featuring an injection Molded MAF (Mass Air Flow) plate and IAT (Intake Air Temperature) that ensures true o-ring seal to the sensor.

RAM AIR SCOOP FITMENT SEALS BETTER THAN STOCK

The factory scoop attachment uses plastic snap in features to secure the scoop to the airbox, which can result in airflow loss. The S&B scoop seal has a rubberized seal fitment that compresses into the stock scoop resulting is less airflow loss.

New
bookmark
Ram DT 2019-2020 1500/2500 / 3500 Cold Air Intake 5.7L Hemi (Oiled Cleanable, 8-ply Cotton Filter) 75-5124
zoom_inchevron_leftchevron_right
Ram DT 2019-2020 1500/2500 / 3500 Cold Air Intake 5.7L Hemi (Oiled Cleanable, 8-ply Cotton Filter)S&B FILTERS
$1,299.00
75-5124
check_box_outline_blankShow Comparison

S&B Filters Cotton Filter Cold Air Intake Kits

S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow S&B oiled cotton filters are built with four or eight layers (for diesels) of the highest-quality cotton gauze. They use deeper and wider pleats with more pleats per filter. Plus, their manufacturing process yields filters with almost no "bleed", creating a greater open surface area. All of this adds up to more surface area per filter, and that means more airflow with excellent protection. All S&B cotton air filters are washable and reusable and will protect your engine from harmful dirt and debris.

Your rig will not only gain performance, but also a sporty high-tech appearance under the hood. In addition, the filters and couplers are made with silicone rubber, not urethane, to help ensure they won't degrade or crack and can resist temperatures as high as 400 degrees F. These intake kits are simple to install, and the great looking signature clear lid allows visual inspection of your filter at all times. Remember, there are good air intakes ... and then there are the better intakes--demand the better; choose the efficiency and style of S&B Filters cold air intake kits.

Features include:

* Helps balance air/fuel ratios to improve gas mileage
* Specially-crafted cross-linked intake tube minimizes restriction
* Custom air box keeps loose dirt and turbulent under hood air out of your intake
* Custom-made for your specific year, make, and model
* Easy-to-use installation instructions and illustrations

Note: This cold air intake fits the eTorque models.

Toyota Tundra 2007-2022 5.7L Cold Air Intake S and B Filters 75-5039
zoom_inchevron_leftchevron_right
Toyota Tundra 2007-2022 5.7L Cold Air Intake S and B FiltersS&B FILTERS
$1,299.00
75-5039
check_box_outline_blankShow Comparison
Our cold air intake for the 2007-2018 Toyota Tundra / Sequoia 5.7L was engineered to minimize air restriction and flows 51.51% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.

Modification may be required due to conversion
All pictures shown are for illustration purpose only. Actual product may vary due to Australian design regulations.
Let's Talk
WE ARE HERE TO ASSIST YOU, PLEASE GET IN TOUCH.
Unit 5/34 Curtis Road, Mulgrave NSW 2756
  • person
  • chat_bubble
  • email
  • phone