fullscreen fullscreen_exit done_all launch
  • CARGOGLIDE / CARGO DRAWERSexpand_more
  • Show All
  • FLOOR MATS AND LINERSexpand_more
  • Show All
  • SPORTS BAR / ROLL BARSexpand_more
  • Show All
  • TUB LINERS / BED LINERSexpand_more
  • Show All
 Ram DS and DT 1500 2009-2023 V8 5.7L Hemi Silver Bullet Throttle Body Spacer AFE Polished 46-32007
zoom_in
Ram DS and DT 1500 2009-2023 V8 5.7L Hemi Silver Bullet Throttle Body Spacer AFEAFE POWER
$383.57
46-32007
check_box_outline_blankShow Comparison

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior to entry of the engine - increasing performance, as well as improving throttle response and fuel efficiency.

  • Constructed from Durable 6061-T6 Billet Aluminum
  • Unique Serrated/Helix Entry Design Creates Turbulence and Eliminates Whistle Sound
  • Increases Air Intake Speed, Improving Performance & Throttle Response
Ram DS 1500 2009-2023 V8-5.7L Hemi Mach Force-XP 3\'\' 409 Stainless Steel Cat Back Polished Tip Exhaust System aFe Power 49-42013-P
zoom_inchevron_leftchevron_right
Ram DS 1500 2009-2023 V8-5.7L Hemi Mach Force-XP 3\'\' 409 Stainless Steel Cat Back Polished Tip Exhaust System aFe PowerAFE POWER
$2,399.00
49-42013-P
check_box_outline_blankShow Comparison

aFe is proud to introduce the MACH Force XP Cat-Back exhaust system for the 2009-2017 Dodge/RAM 1500 with the V8-5.7L HEMI engine. This exhaust system outflows the factory exhaust by 130%. This cat-back exhaust is constructed of 3" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with dual gloss black 304 stainless steel, double wall slash cut tips for an aggressive style.

Installation is a Snap:
This MACH Force XP exhaust system use all factory mounting locations providing stability and a hassle-free installation.

Leak-Free Seal: 
High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths.

Aggressive Sound: 
A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Perfect Fit: 
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.


Ram DS 1500 2009-2023 V8 5.7L Hemi Twisted Steel Long Tube Headers & Y Pipe aFe Power 48-42010-YC
zoom_inchevron_leftchevron_right
Ram DS 1500 2009-2023 V8 5.7L Hemi Twisted Steel Long Tube Headers & Y Pipe aFe PowerAFE POWER
$4,218.06
48-42010-YC
check_box_outline_blankShow Comparison

Our Twisted Steel long tube header and y-pipe added an astounding +32 HP and +44 lbs. x ft. 

Twisted Steel Long Tube Headers Features:

  • 16-Gauge, 1-3/4" Mandrel-Bent Stainless Steel Tubing for Unrestricted Flow
  • 3/8" Thick, Laser-Cut, Head Flanges Designed to Match the Head Port for a Leak-Free Seal
  • 4-to-1 Formed Merge Collectors Eliminate Flow Blocking Turbulence
  • Optimized Tube Lengths Improve Flow and Performance
  • 100% Hand MIG Welded Construction Ensures Optimal Strength and Durability

Y-Pipe (Street Version) Features:

  • High-Flow, 400 Cell Catalytic Converters for Improved Flow
  • Mandrel-Bent 3" into 3-1/2" Stainless Steel Tubing for Better Flow and Added Power
  • True 2-to-1 Mitered Merge Collector Eliminates Dead Zones for Improved Flow
Toyota Tundra 2010-2022 V8 5.7L Twisted Steel Long Tube Header & Connection Pipe aFe Power 48-46008-YC
zoom_inchevron_leftchevron_right
Toyota Tundra 2010-2022 V8 5.7L Twisted Steel Long Tube Header & Connection Pipe aFe PowerAFE POWER
$2,990.00
48-46008-YC
check_box_outline_blankShow Comparison

In recent testing, the Street Version produced +33 HP and +30 lbs. x ft. TQ on our in-house dyno (tested on a 2014 Toyota Tundra V8-5.7L).

Headers:

  • 1-3/4" Primary Tubing Leads into a 3" Collector
  • 4-to-1 Formed Merge Collectors Eliminate Flow-Block Turbulences
  • Retains Factory Air Injection
  • Optimized Tube Lengths Improve Flow and Performance
  • 100% MIG Welded for Strength and Durability

Connection Pipes:

  • Includes Dual, High-Flow, 400 CPSI Stainless Steel Catalytic Converters
  • 3" Diameter Mandrel-Bent Stainless Steel Tubing
  • Utilizes OE Mounting Locations
Ram DS 1500 2009-2023 V8-5.7L Hemi Mach Force-XP 3inch 409 Stainless Steel Cat Back Exhaust System Black aFe Power 49-42013-B
zoom_inchevron_leftchevron_right
Ram DS 1500 2009-2023 V8-5.7L Hemi Mach Force-XP 3inch 409 Stainless Steel Cat Back Exhaust System Black aFe PowerAFE POWER
$2,399.00
49-42013-B
check_box_outline_blankShow Comparison

aFe is proud to introduce the MACH Force XP Cat-Back exhaust system for the 2009-2017 Dodge/RAM 1500 with the V8-5.7L HEMI engine. This exhaust system outflows the factory exhaust by 130%. This cat-back exhaust is constructed of 3" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with dual gloss black 304 stainless steel, double wall slash cut tips for an aggressive style.

Installation is a Snap:
This MACH Force XP exhaust system use all factory mounting locations providing stability and a hassle-free installation.

Leak-Free Seal: 
High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths.

Aggressive Sound: 
A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Perfect Fit: 
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.


Ford F150 2015-2020 V6-3.5L BladeRunner GT Series Intercooler with Tube AFE 46-20292-B
zoom_in
Ford F150 2015-2020 V6-3.5L BladeRunner GT Series Intercooler with Tube AFEAFE POWER
$3,372.27
46-20292-B
check_box_outline_blankShow Comparison

This BladeRunner GT Series Intercooler represents the next generation of intercoolers. Designed specifically for the 2017 Ford F-150 Raptor 3.5L (tt) Ecoboost, this BladeRunner intercooler utilizes a 3" bar and plate core design. The end tanks are constructed of 3/16" 5052 aluminum and TIG-Welded for superior strength and durability. aFe has also added CNC machined ports which can be used for a condensation drain, sensors, or water methanol injection.

End Tanks:
The unique BladeRunner end tanks are constructed out of 3/16'' TIG-Welded aluminum plates.

3" Bar and Plate Core Design:
The use of the bar and plate core design allows for greater airflow and better efficiency.

Billet Aluminum Inlet/Outlets:
This BladeRunner Intercooler uses dual 2-1/2" inlets and a 3" outlet for superior strength and durability.

TIG-Welded:
100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.

Flow and Performance:
aFe Power's cold side tube is constructed from 3-1/2" and 3" mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp powder-coating also insulates the tube from engine heat and protects the tube from corrosion. The smooth transition bends decrease turbulence, minimize pressure loss, while increasing horsepower and torque. This tube is also equipped with a billet aluminum factory style quick connect adapter that seals with an o-ring. One 1/8" NPT port which is also provided on the tube for a sensor or water-methanol injection.

Condensation Drain:
The intercooler includes a 1/8" NPT brass breather vent for automatic draining, of condensation or any type of build up inside the intercooler. For those who wish to manually drain the build up we have also included a solid NPT plug.

Perfect Fit:
Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes high quality stainless steel clamps and heavy-duty 5-Ply couplings for strength.

aFe Badging:
A unique laser-cut aFe power logo plate is welded-onto the intercooler tube for an aggressive style.

Free Shipping
local_shipping
Ford F150 Raptor 2017-2023 V6-3.5L Rebel XD Series 3inch 409 Stainless Steel Cat-Back Exhaust System aFe Power 49-43091-B
zoom_inchevron_leftchevron_right
Ford F150 Raptor 2017-2023 V6-3.5L Rebel XD Series 3inch 409 Stainless Steel Cat-Back Exhaust System aFe PowerAFE POWER
$2,136.86
49-43091-B
check_box_outline_blankShow Comparison

aFe power introduces an all new Rebel Series dual middle-side exit exhaust system for the 2017-2018 Ford F-150 Raptor with V6-3.5L EcoBoost twin-turbo engine. This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3" MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system.

3-1/2" Dia. Black Middle-Side Exit Tips:
Finishing off the exhaust are dual 3-1/2" diameter black 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look.

Installation Is A Snap:
This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:
High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths.

Aggressive Sound:
A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Perfect Fit:
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

Fits:
CC/SB, SuperCrew/Short Bed with 5-1/2' ft. box
EC/SB, SuperCab/Short Bed with 5-1/2' ft. box

Chevrolet 2500 2017-2019 V8-6.6L Rebel XD Series 4inch 409 Stainless Steel Down-Pipe Back Exhaust System aFe Power 49-44092-B
zoom_inchevron_leftchevron_right
Chevrolet 2500 2017-2019 V8-6.6L Rebel XD Series 4inch 409 Stainless Steel Down-Pipe Back Exhaust System aFe PowerAFE POWER
$1,990.00
49-44092-B
check_box_outline_blankShow Comparison

High Flow 409 Stainless Steel Muffler:
This 409 stainless steel High-Flow muffler is designed to provide a deep throaty, powerful sound on acceleration, but maintain a smooth sound at idle. This muffler is constructed uses a straight through perforated core with heat resistant packing to reduce backpressure and maximize flow. Also featuring a stamped aFe POWER logo for an added style. Muffler Specifications: 4" Center Inlet /Outlet, 8" Round x 24" L Body Diameter.

OE Fit:
Features OE-style bayonet hangers to maintain stability during high-rev vibration and high-temp conditions. Provides hassle-free installation.

Flow and Performance:
This Rebel XD exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and throttle response.

Exhaust Tips:
Finishing off this exhaust are dual 5" black stainless steel straight-cut intercooled exhaust tips featuring a laser-cut stainless steel "aFe POWER" badge for added style.

Fits:
2017 Chevrolet Silverado HD 2500/3500 V8-6.6L (td) Duramax
2017 GMC Sierra HD 2500/3500 V8-6.6L (td) Duramax

Wheelbases:
Extended Cab/Short Bed, 6.6 ft. Bed, 143.5 Wheelbase
Crew Cab/Short Bed, 6.6 ft. Bed, 153.7 Wheelbase
Extended Cab/Long Bed, 8 ft. Bed, 158.1 Wheelbase
Crew Cab/Long Bed, 8 ft. Bed, 167.7 Wheelbase

Note 1:
Cutting is required for some cab configurations.

Nissan Titan XD 2016-2022 V8-5.0L Large Bore-HD 4 inch Exhaust aFe Power 49-46127-B
zoom_inchevron_leftchevron_right
Nissan Titan XD 2016-2022 V8-5.0L Large Bore-HD 4 inch Exhaust aFe PowerAFE POWER
$1,606.88
49-46127-B
check_box_outline_blankShow Comparison

Power, quality and sound is what this Large Bore-HD series down-pipe back exhaust system offers. 4" mandrel-bent 409 stainless steel tubing and high-flow muffler are less restrictive keeping exhaust pulses flowing smoothly for increased power gains. High-temp black powder coated stainless steel exhaust tip completes the look. Factory style hangers, quality band clamps and all necessary hardware ensure a quick install and long-lasting exhaust that looks as good as it performs.

Flow and Performance:
This Large Bore-HD exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum flow and longevity. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lower EGT's.

High Flow 409 Stainless Steel Muffler:
This 409 stainless steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration, but maintain a smooth sound at idle. Stamped with an aFe POWER logo for an aggressive style. Muffler Specifications: 4" Center Inlet /Outlet, 8" Round x 24" Length Body.

6" Diameter Black Tip:
This system is finished off with a 6" high-temp. black powder-coated slash cut tip. A unique laser-cut aFe Power logo plate is riveted on for a custom, quality finish.

OE Fit:
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.

Fits: CC/SB (151.6" Wheelbase/6.6ft. bed)

Nissan Titan XD 2016-2019 V8-5.0L  Intercooler Blade Runner GT Series with Tubes AFE 46-20282-B
zoom_inchevron_leftchevron_right
Nissan Titan XD 2016-2019 V8-5.0L Intercooler Blade Runner GT Series with Tubes AFEAFE POWER
$5,000.93
46-20282-B
check_box_outline_blankShow Comparison

This BladeRunner GT Series Intercooler kit represents the next generation of intercoolers. The BladeRunner intercoolers utilize a 3" bar and plate core design that is larger than stock. This kit outflows the OE intercooler set up for more power.

End Tanks:
The unique BladeRunner end tanks are constructed out of 3/16'' TIG-Welded aluminum plates.

3" Bar and Plate Core Design:
The use of the bar and plate core design allows for greater airflow.

Billet Aluminum Inlet/Outlets:
This BladeRunner Intercooler uses 3" inlets and outlets for superior strength and durability..

TIG-Welded:
100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.

Condensation Drain:
The intercooler includes a 1/8" NPT vent, which can be used to drain any type of build up from the intercooler.

Perfect Fit:
Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes high quality stainless steel spring loaded t-bolt clamps and heavy-duty 5-Ply couplings for strength.

Flow and Performance:
aFe Power's intercooler tube are constructed from 3" mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tube from engine heat and protects the tube from corrosion. The smooth transition bends decrease turbulence, minimize pressure loss, while increasing horsepower and torque. Also included is four 1/8" NPT port which is provided for a sensor or water-methanol injection.

aFe Badging:
A unique laser-cut aFe power logo plate is welded-onto the intercooler tubes for an aggressive style.

Chevrolet 2500 2017-2019 6.6L Cold Air Intake S and B Filters 75-5144
zoom_inchevron_leftchevron_right
Chevrolet 2500 2017-2019 6.6L Cold Air Intake S and B FiltersS&B FILTERS
$1,299.00
75-5144
check_box_outline_blankShow Comparison
Our cold air intake for the 2017-2018 Silverado / Sierra Duramax 6.6L was engineered to minimize air restriction and flows 43.86% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor.
Ford F250, F350 2017-2019 Powerstroke 6.7L Cold Air Intake S and B Filters 75-5085
zoom_inchevron_leftchevron_right
Ford F250, F350 2017-2019 Powerstroke 6.7L Cold Air Intake S and B FiltersS&B FILTERS
$1,299.00
75-5085
check_box_outline_blankShow Comparison
Our cold air intake for the 2017-2018 Ford Powerstroke 6.7L was engineered to minimize air restriction and flows 55.97% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.

We swapped the location of the intake box and battery, allowing our intake to not only be closer to but also directly in line with the front air inlet. Additionally, our intake tube has minimal bends as it connects to the turbo inlet. These details result in a signifcant decrease in restriction compared to stock intake.
Ford F150 2015-2017 5.0L Cold Air Intake S and B Filters 75-5083
zoom_inchevron_leftchevron_right
Ford F150 2015-2017 5.0L Cold Air Intake S and B FiltersS&B FILTERS
$1,299.00
75-5083
check_box_outline_blankShow Comparison
Our cold air intake for the 2015-2016 Ford F-150 5.0L was engineered to minimize air restriction and flows 40% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.
Toyota Tundra 2007-2022 5.7L Cold Air Intake S and B Filters 75-5039
zoom_inchevron_leftchevron_right
Toyota Tundra 2007-2022 5.7L Cold Air Intake S and B FiltersS&B FILTERS
$1,299.00
75-5039
check_box_outline_blankShow Comparison
Our cold air intake for the 2007-2018 Toyota Tundra / Sequoia 5.7L was engineered to minimize air restriction and flows 51.51% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.

Modification may be required due to conversion
Ford F150 2017-2020 Raptor V6-3.5L Momentum XP Alpha Raptor Pro 5R Cold Air Intake System aFe Power 54-73120-B
zoom_inchevron_leftchevron_right
Ford F150 2017-2020 Raptor V6-3.5L Momentum XP Alpha Raptor Pro 5R Cold Air Intake System aFe PowerAFE POWER
$1,392.71
54-73120-B
check_box_outline_blankShow Comparison

Unique One-Piece Housing:
The smooth one-piece sealed housing is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style.

3" Equal Length Intake Tubes:
Dual 3" mandrel-bent Blue powder-coated aluminum equal length intake tubes are designed with an H-pipe to balance intake tube pressure and maximizes airflow and velocity. Also included, an exclusive stainless steel riveted aFe Power badge.

Dual Inlet Large 5-Layer Performance Air Filter:
This sealed intake system utilizes pre-oiled, large 7" tall radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

Hassle-Free Installation:
All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

The Dynamic Air Scoop (D.A.S.) from aFe is a very simple snap-in product that increases airflow and velocity into the Momentum HD air intake system from the front of the vehicle. This scoop is constructed of high quality plastic for greater strength and unique styling. This scoop is a perfect upgrade to the Momentum HD cold air intake system (P/N: 50-73006; 50-73006-W & 51/54-73116).

Lower Intake Air Temperature:
Dynamic Air scoops lower intake air temperatures by forcing more cool air from the front of the vehicle into the air intake auxiliary scoop.

High Quality D.A.S Scoop:
This Dynamic Air Scoop is constructed with high quality plastic for greater strength and unique styling.

Hassle Free Installation:
All necessary hardware is included for an easy, hassle free installation. No cutting or drilling required.


ADDS UP TO:+28%FLOW INCREASE +13 HP HORSEPOWER +24 Lbs. x Ft.TORQUE MAX GAINS

All pictures shown are for illustration purpose only. Actual product may vary due to Australian design regulations.
Let's Talk
WE ARE HERE TO ASSIST YOU, PLEASE GET IN TOUCH.
Unit 5/34 Curtis Road, Mulgrave NSW 2756
  • person
  • chat_bubble
  • email
  • phone