Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
Our cold air intake for the 2020 Silverado 6.2L was engineered to minimize air restriction and flows 51.69% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.
Featuring a massive, highly efficient air filter that snaps into the airbox easily and securely, providing an airtight seal. With our new snap in filter design, you can install and inspect your filter in seconds. Available in either 8-layer Cotton Cleanable or Dry Extendable media.
Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim ensures an airtight seal, protecting against unwanted, power-robbing engine heat.
The Mass Airflow Sensor is relocated further down the S&B intake tube allowing for further airflow improvements. We got you covered with our included MAF extension harness.
The air filter, coupler, lid seal and plug seal are all made with silicone. Silicone is a premium rubber which will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.
Check out the sound of the intake when installed in the truck. A huge air filter and air box results in a more aggressive sound compared to stock.
Now your 19-20 Silverado/Sierra can perform and sound as good as it looks with this aFe POWER Vulcan Series cat-back exhaust system. 4inch to dual 3inch mandrel-bent, 304 stainless steel tubing and high-flow muffler improves performance across the power band and delivers a deep, aggressive exhaust tone. 100% MIG-welded for strength and durability. Quad 4inch polished 304 stainless steel exhaust tips for an aggressive custom look.
4inch to Dual 3inch 304 Stainless Steel Tubing:
This system is constructed of durable mandrel-bent 4inch to dual 3inch 304 stainless steel tubing for maximum corrosion resistance. Mandrel-bent tubing for maximum air flow and low turbulence; increasing torque, horsepower and improved throttle response.
High-Flow Performance Muffler:
A single-in, dual-out high-flow stainless steel muffler allows increased exhaust flow and reduces exhaust drone, maintaining a deep, tuned sound.
Quad Polished Tips:
Quad 4inch polished 304 stainless steel exhaust tips replace the factory tips for an aggressive, custom sport truck look.
Perfect Fit:
Factory-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions for a secure fit.
Hassle-Free Installation:
Quality hardware and clamps are included for a hassle-free installation.
It may be necessary to cut the OE Exhaust to remove it from the vehicle.
Now your 19-20 Silverado/Sierra can perform and sound as good as it looks with this aFe POWER Vulcan Series cat-back exhaust system. 4inch to dual 3inch mandrel-bent, 304 stainless steel tubing and high-flow muffler improves performance across the power band and delivers a deep, aggressive exhaust tone. 100% MIG-welded for strength and durability. Quad 4inch black 304 stainless steel exhaust tips for an aggressive custom look.
4inch to Dual 3inch 304 Stainless Steel Tubing:
This system is constructed of durable mandrel-bent 4inch to dual 3inch 304 stainless steel tubing for maximum corrosion resistance. Mandrel-bent tubing for maximum air flow and low turbulence; increasing torque, horsepower and improved throttle response.
High-Flow Performance Muffler:
A single-in, dual-out high-flow stainless steel muffler allows increased exhaust flow and reduces exhaust drone, maintaining a deep, tuned sound.
Quad Black Tips:
Quad 4inch black 304 stainless steel exhaust tips replace the factory tips for an aggressive, custom sport truck look.
Perfect Fit:
Factory-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions for a secure fit.
Hassle-Free Installation:
Quality hardware and clamps are included for a hassle-free installation.
It may be necessary to cut the OE Exhaust to remove it from the vehicle.
AMTRUX Contour Floor Liners perfectly matches the contours of your truck or SUV and brings together indestructible strength with a soft, comfortable cushion. Add to that a premium look and our exclusive features and you've got liner gold. Punch it, slap it, flick it, kick it. Can you feel it?.
We're proud to announce the FIRST Australian made full twin 3in system to suit the RHD Chevrolet Silverado 1500 ZR2.
Cats to bolt to the factory catback position.
Tailpipes to suit the factory in-bumper tips. Quad exit option coming soon!
Awesome V8 sound!
The X4 Hard Rolling Truck Bed Tonneau Cover by BAK Flip, is a premium hard rolling cover with the great features of a stylish matte black finish. When closed, heavy-duty aluminum slats secure the cover the full length of the bed on both sides, providing unrivaled strength and security. When opened, the cover rolls up tight providing full bed access without blocking rear view mirror and third brake light visibility.
WHY UPGRADE?
Constructed of heavy-duty aluminium panels. When latched, the Patented Rotational Locking Rails secure the cover the entire length of the truck bed. Heavy-duty locking levers are now 3X thicker with reinforced gussets for added strength and are engineered to lock with no adjustment necessary.
Premium matte finish hard rolling cover
Patented rotational locking rails lock 100% of the cover for unrivaled security
Automatic latching system
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
The rugged 3.5" Oval Bull Bar includes an integrated 20" LED light bar - it not only defends your front-end, it also boosts your visibility.
The included heavy-duty light bar illuminates your night driving with a bright flood beam pattern and includes a wiring harness with a switch - everything you need to install. Match or accent your tough exterior with a Lund LED Bull Bar in your choice of black textured powder coat or polished T304 stainless steel finish.
The Lund LED Bull Bar includes a Lund-logoed steel skid plate and is backed by a 3-year limited warranty.
Get a killer, level look for your vehicle with Rough Country's 1.5-2-inch Torsion Key Leveling Kit for 2020 GM HD Trucks. This easy-to-install leveling kit raises the front of your truck to be level with the rear, providing increased ground clearance for larger wheels and tires and aggressive, good looks.
This kit includes a set of forged torsion bar keys, engineered to be considerably stronger than the stock torsion keys or cast steel aftermarket parts. These durable, forged torsions keys feature a corrosion resistant powder coat to withstand the elements and install easily, with no cutting or drilling required. A set of optional N3 Nitrogen-charged shock absorbers offer 10-stage variable valving and incredible performance for on or off-road driving!
Best of all, this kit features a Lifetime Replacement Guarantee
Our cold air intake for the 2020-2021 Silverado / Sierra Duramax L5P 6.6L was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.
Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim provides a protective seal against unwanted, power-robbing engine heat and debris. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.
The air filter, coupler, lid seal and box plug are all made with silicone. Silicone is a premium rubber that will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.
More air equals better performance. The Duramax L5P 6.6L intake features three air inlet points. If you want to customize the amount of air you take in, we provide an optional box plug that can seal off one inlet point.
S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor.
REQUIRES MODIFICATION DUE TO CONVERSION
Comfortable and Durable Protection. Protect your seats from water, mud, and anything you can throw at them with Rough Country's front and rear Neoprene Seat Covers. These easy-to-install covers fit snugly over your truck's seats to protect your interior from the elements while blending in perfectly. These comfortable seat covers feature a 4-layer construction with thick foam padding for a comfortable feel and durable quality. The outer Neoprene protective layer wards off water and mildew while being soft to the touch and offering great breathability. Each cover is designed to be an exact fit on your vehicle, with accessibility for airbags, seat adjustment, and more! Pick up a set of front seat covers to save your most-used seats from additional wear or a rear set to protect your back seat from stains caused by kids or animals. Or choose front and rear for full seat protection!
Installation and Warranty. No tools are required for this fast and simple upgrade, just slip each cover firmly over the seat and fasten with the built-in straps and you're ready to roll! Rough Country's Neoprene Seat Covers are backed with a two-year warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!
Unique One-Piece High Quality Housing:
The smooth one-piece high quality plastic sealed housing is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style.
High Quality Tube:
This system uses a high quality cross-linked polyethylene plastic computer designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Two CNC machined, high quality billet aluminium fittings are mounted on the tube to provide a perfect connection with the factory vacuum lines.
Huge 5-Layer Performance Air Filter:
The Momentum GT intake is designed around a pre-oiled, large 9" Tall conical inverted top 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.
Premium Hardware:
A premium stainless steel T-bolt clamp and a polyurethane coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.
Protect your truck in style.?Nothing turns heads like the style of your Ford F-150, so why not give it a little extra attitude with Rough Country's SF1 Fender Flares? Not only do they give your vehicle an awesome, simulated riveted look, but they also provide additional protection from rocks and mud. Plus, they offer maximum tire coverage and look great on lifted trucks. And best of all, they're easily paintable to color match your truck. So, gear up and roll with style with Rough Country's SF1 Fender Flares!
Durability with aggressive looks. Who says you can't have it all? With our SF1 Pocket Fender Flares, you get the best of both worlds! Featuring 2.5" of tire coverage and 5.5" of fender coverage these flares not only look good, they provide your F-150 with some much-needed protection from road debris. Rough Country's Pocket Fender Flares are UV protected to prevent fading. Plus, they're made from a special Tri-Blend ABS material for maximum strength and durability.
Installation.?Our SF1 Pocket Fender Flares are a bolt-on install, which means a quick and easy no-drill installation for you! Each order includes step-by-step instructions.
Warranty. Pocket Fender Flares are covered with a 3-year limited warranty. Rough Country's industry-leading warranty gives you the peace of mind to purchase with confidence.
Our cold air intake for the 2020-2022 Ford 6.7L Powerstroke was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.
Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy, as the filter can be installed and removed without having to remove the intake tube. Our silicone edge trim provides a protective seal against unwanted, power-robbing engine heat and debris. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.
The Intake Tube has minimal bends as it connects to the turbo inlet. It is positioned in one clean line with minimum obstructions from the turbo inlet to the intake box and air filter. This results in a decrease in restriction compared to stock.
The 75-5140 intake kit has (2) airflow configurations. S&B includes a silicone box plug that can be installed or removed depending on personal preference and airflow requirements.
S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. An injection molded MAF plate in conjunction with a foam MAF sensor gasket ensures a true OE seal to the sensor.
Maintain your air filter's optimal performance with regular cleaning and oiling, which is recommended every 40-50k Ks.
For Pro 5R and Pro 10R Air Filters:
This Restore Kit was specifically developed for aFe POWER's Pro 5R and Pro 10R air filters. The POWER CLEANER effectively breaks down dirt and dust without damaging the media, while the oil captures debris during use.
Restoring Air Filters:
Simply apply the cleaner onto the filter element, let it soak, and rinse. Once dry, the oil can be applied. Take care to not over-oil the filter. Refer to the instruction sheet for more information.
Vehicle Fitment:
Product Features:
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
The Wetseat is Australia's best neoprene seat cover since 2007. Specifically manufactured to suit the Australian way of life by the sand, sea, mud and dirt, the Wetseat is an innovative protection solution designed to fit like a second skin. It is easily cleaned and provides users with a cover that repels against spills.
Key features include:
Our cold air intake for the 2019-2021 Ram 2500/3500 6.7L was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.
Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim provides a protective seal against unwanted, power-robbing engine heat and debris. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.
The air filter, coupler, lid seal and box plug are all made with silicone. Silicone is a premium rubber which will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.
S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights. Featuring an injection Molded MAF (Mass Air Flow) plate and IAT (Intake Air Temperature) that ensures true o-ring seal to the sensor.
The factory scoop attachment uses plastic snap in features to secure the scoop to the airbox, which can result in airflow loss. The S&B scoop seal has a rubberized seal fitment that compresses into the stock scoop resulting is less airflow loss.
Front and Rear covers to protect your seats from water, mud, and anything you can throw at it with Rough Country's front and rear Neoprene Seat Covers. These easy-to install covers fit snugly over your truck's seats to protect your interior from the elements while blending in perfectly
Please Note- rear seat is 2+1 seat config.
Introducing the all-new Sentry CT by TruXedo. This hard roll-up truck bed cover comes equipped with our premium matte black woven fabric and features an Xtra-low profile look. The fabric is pressure bonded to heavy-duty black aluminum slats making Sentry CT the ultimate in strength and style.
When rolled up tightly at the cab, the cover provides full bed access without blocking rear view visibility or the third brake light. When closed, the Sentry CT's flush mount profile delivers a sleek look that is sure to impress! An extra security latch is located towards the center of the cover for enhanced protection so you can rest in the fact that your cargo is safe and sound.