MORE AIRFLOW.
MAXIMUM PERFORMANCE

Our cold air intake for the 2020 Silverado 6.2L was engineered to minimize air restriction and flows 51.69% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

With five layers of progressively finer mesh cotton gauze media between 100% polyurethane top and base, this high flow oiled conical performance filter provides excellent airflow for maximum horsepower and torque. Washable and reusable for multiple cleanings, the tall, open, evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Pliable polyurethane flange with integrated bumps insures tight, no leak seal over the life of the filter.

Airflow Improvement: +51.83%

Efficiency Rating: 99.05%

MAXIMUM PERFORMANCE

Our cold air intake for the 2020-2021 Silverado / Sierra Duramax L5P 6.6L was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

NEW SNAP IN LID DESIGN

Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim provides a protective seal against unwanted, power-robbing engine heat and debris. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.

PREMIUM SILICONE COMPONENTS

The air filter, coupler, lid seal and box plug are all made with silicone. Silicone is a premium rubber that will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.

CHOOSE YOUR AIRFLOW

More air equals better performance. The Duramax L5P 6.6L intake features three air inlet points. If you want to customize the amount of air you take in, we provide an optional box plug that can seal off one inlet point.

NO CHECK ENGINE LIGHTS

S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor.

REQUIRES MODIFICATION DUE TO CONVERSION

Airflow Improvement: 40.63%

Efficiency Rating: 99.89%

MAXIMUM PERFORMANCE

Our cold air intake for the 2019-2021 Ram 2500/3500 6.7L was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

NEW SNAP IN LID DESIGN

Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim provides a protective seal against unwanted, power-robbing engine heat and debris. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.

PREMIUM SILICONE COMPONENTS

The air filter, coupler, lid seal and box plug are all made with silicone. Silicone is a premium rubber which will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.

NO CHECK ENGINE LIGHTS

S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights. Featuring an injection Molded MAF (Mass Air Flow) plate and IAT (Intake Air Temperature) that ensures true o-ring seal to the sensor.

RAM AIR SCOOP FITMENT SEALS BETTER THAN STOCK

The factory scoop attachment uses plastic snap in features to secure the scoop to the airbox, which can result in airflow loss. The S&B scoop seal has a rubberized seal fitment that compresses into the stock scoop resulting is less airflow loss.

Airflow Improvement: +39.05%

Efficiency Rating: +99.42%

MAXIMUM PERFORMANCE

Our cold air intake for the 2020-2022 Ford 6.7L Powerstroke was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

NEW SNAP IN LID DESIGN

Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy, as the filter can be installed and removed without having to remove the intake tube. Our silicone edge trim provides a protective seal against unwanted, power-robbing engine heat and debris. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.

LESS RESTRICTION.
MORE AIRFLOW.

The Intake Tube has minimal bends as it connects to the turbo inlet. It is positioned in one clean line with minimum obstructions from the turbo inlet to the intake box and air filter. This results in a decrease in restriction compared to stock.

CHOOSE YOUR AIRFLOW.

The 75-5140 intake kit has (2) airflow configurations. S&B includes a silicone box plug that can be installed or removed depending on personal preference and airflow requirements. 

NO CHECK ENGINE LIGHTS

S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. An injection molded MAF plate in conjunction with a foam MAF sensor gasket ensures a true OE seal to the sensor.

S&B Filters Cotton Filter Cold Air Intake Kits

S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow S&B oiled cotton filters are built with four or eight layers (for diesels) of the highest-quality cotton gauze. They use deeper and wider pleats with more pleats per filter. Plus, their manufacturing process yields filters with almost no "bleed", creating a greater open surface area. All of this adds up to more surface area per filter, and that means more airflow with excellent protection. All S&B cotton air filters are washable and reusable and will protect your engine from harmful dirt and debris.

Your rig will not only gain performance, but also a sporty high-tech appearance under the hood. In addition, the filters and couplers are made with silicone rubber, not urethane, to help ensure they won't degrade or crack and can resist temperatures as high as 400 degrees F. These intake kits are simple to install, and the great looking signature clear lid allows visual inspection of your filter at all times. Remember, there are good air intakes ... and then there are the better intakes--demand the better; choose the efficiency and style of S&B Filters cold air intake kits.

Features include:

* Helps balance air/fuel ratios to improve gas mileage
* Specially-crafted cross-linked intake tube minimizes restriction
* Custom air box keeps loose dirt and turbulent under hood air out of your intake
* Custom-made for your specific year, make, and model
* Easy-to-use installation instructions and illustrations

Note: This cold air intake fits the eTorque models.

DETAILS:

• +11 HP / +10 lbs. x ft. Torque Max Gains
• Outflows Factory Intake by up to 58%
• Computer Designed Roto-Molded Intake Tube
• One-Piece Sealed Housing
• Pro 5R Oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance
• CNC Machined, High Quality Billet Aluminium Fittings
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation

• Unique One-Piece High Quality Housing:
  The smooth one-piece high quality plastic sealed housing is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style.

  High Quality Tube:
  This system uses a high quality cross-linked polyethylene plastic computer designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Two CNC machined, high quality billet aluminium fittings are mounted on the tube to provide a perfect connection with the factory vacuum lines.

  Huge 5-Layer Performance Air Filter:
  The Momentum GT intake is designed around a pre-oiled, large 9" Tall conical inverted top 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.

  Premium Hardware:
  A premium stainless steel T-bolt clamp and a polyurethane coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.