new
bookmark
Chevrolet 1500 2019-22 3/5 Lowering kit by IHC IHC-1920GMCK-35

We pride ourselves on giving the best quality, brands and service. So if for any reason you're not happy with your purchase; contact us and we will do our best to rectify the problem.

Chevrolet 1500 2019-22 3/5 Lowering kit by IHC

IHC
IHC-1920GMCK-35
$3,960.00
favoriteAdd to Favorites
Add To Cartexpand_lessexpand_more


2019-2021 GM1500 3/5

 LOWERING KIT WITH HELPER

 BAGS

IHC Suspension is excited to announce the most complete 2019 - Present 3/5 lowering kit in the market. IHC Suspension coming from the service/installation side understood the challenges that other kits were not solving. Here are our key features that differentiate us from the competition and save you money!

  • FACTORY RIDE QUALITY
  • Alignment! No notching frame pockets for camber correction.
  • NO C NOTCH
  • IHC control arm aligns to factory specs.
  • Standard Upper Control arms for camber correction included. (No additional parts needed like camber/caster bushing or offset ball joints to align)
  • IHC control arms run Delrin bushing for maximum performance, extended bushing life, and minimal maintenance.
  • IHC Flip kit has the correct pinion angle built in so no need to use pinion shims.
  • Standard Helper Bag kit included
  • MADE IN THE USA!
  • Manufactured in TEXAS!
  • Lifetime warranty on all metal parts!
  • This will not fit long bed models.

IHC Suspension designed 2019-2021 with Ride quality being the #1 goal. We achieved that by lowering the front end with custom control arms. You achieve the 3" drop with the lower control arms.  Keeping stock spring, shocks, and spindles where OEM ride quality comes from. Upper control arms are standard in our kit to get your camber back in specs. Most kits require customers to notch frame pockets which are more time-consuming for installers and more money for labour to customer. Most times if notching is not done correctly lower control arms will constantly move and throw the alignment off. Not with IHC arms though.  The rear is lowered with a 6" flip kit and 1" lift shackles are provided to set at 5" rear drop. Nitrogen charged drop shocks are included. New u bolts are included. Standard helper bag kit is also included. This will prevent customers from bottoming out. We recommend 10-15 psi in bags at all times.

THIS WILL NOT FIT GM TRUCKS WITH MAGNETIC RIDE OR ADAPTIVE RIDE CONTROL.

WILL FIT AT4 AND TRAIL BOSS MODELS FRONT STRUTS WILL NEED TO BE CHANGED.

Please contact us to find out about the warranty that applies to this product.

All pictures shown are for illustration purpose only. Actual product may vary due to Australian design regulations.
Let's Talk
WE ARE HERE TO ASSIST YOU, PLEASE GET IN TOUCH.
11 Rob Place, Vineyard NSW 2765
  • person
  • chat_bubble
  • email
  • phone