Through a collaborative effort between BDS Suspension and Fox Racing, BDS now offers this 4-6" Dodge 1500 4WD suspension system featuring Fox 2.5" coil-over remote reservoir shocks. This system has been rigorously tested to maximize travel and performance on and off the pavement.

This lift kit is based around two one-piece, 1/4" laser cut high-clearance crossmembers and replacement steering knuckles. The high-clearance crossmembers increase ground clearance for off road performance and on road appeal.

The replacement steering knuckles make for a clean installation as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.

The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines.

Nothing complements this BDS Suspension better than the race proven design of Fox 2.5" remote reservoir coil-over front shocks. These have been specifically engineered to fit the BDS Suspension system and feature an external reservoir for increased oil cooling capacity and nitrogen volume for a more consistent and comfortable ride. These have also been pre-set by BDS to 6" of lift for an easy installation, but can be adjusted down to 4" or fined tuned anywhere in between to your liking.

BDS allows you to customize your desired stance by offering 2" rear coil spacers or 3" and 5" Pro-Ride coils that are capable of being smashed totally flat and will come back to normal ride height. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets, and sway bar links.

BDS by Fox 2.0 series rear gas shocks come standard to match the front 2.5" Fox Coil-over

Tire & Wheel Combinations

• 37" x 12.50" w/17 x 9 and 4-1/2" back spacing
• 37" x 12.50" w/18 or 20 x 9 and 5" back spacing

*Trimming may be required*

• Easy Bolt-On installation
• No Cutting or Drilling required!
• Includes New forged aluminum upper control arms
• Control arms include POM ball joints for greater range of motion and easier installation
• Ball joints are pre-installed to ease installation
• Increased ground clearance
• Levels the front and rear of the truck
• Can be returned to stock
• Fits Rebel Models

This 4" lift kit will clear up to 35" tires and is based around two one-piece, 1/4" laser cut high-clearance crossmembers and replacement steering knuckles. The high-clearance crossmembers increase ground clearance for off road performance.

The replacement steering knuckles reduce installation time as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.

The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines.

The rear is lifted via BDS 2" coil spacers to level most trucks. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets and sway bar links. A 3" rear coil spring option is available depending on your desired stance.

Check out more options and build your own kit by clicking on customize this kit.

Tire & Wheel Combinations

• 35" x 12.50" w/17 x 9 and 4-1/2" back spacing
• 35" x 12.50" w/18 or 20 x 9 and 5" back spacing

*Trimming may be required*

AMTRUX Contour Floor Liners perfectly matches the contours of your truck or SUV and brings together indestructible strength with a soft, comfortable cushion. Add to that a premium look and our exclusive features and you've got liner gold. Punch it, slap it, flick it, kick it. Can you feel it?.

• Our FormFit Design process perfectly forms each liner to the detailed contours of your specific ride.
• Our exclusive StayPut Cleats help keep your liners securely in place.
• No hassle lifetime guarantee. 
• Our FormFit Design process perfectly forms each liner to the detailed contours of your specific ride.
• Our patented FormFit Edge is a raised ridge that runs along the door jam, protecting your truck or SUV from all manner of mess.
• Our exclusive StayPut Cleats help keep your liners securely in place.
• With both softness and strength, our rubberized DuraGrip material was designed with comfort in mind.

• Incredible ride quality & performance
• 0-3inch lift
• Monotube design
• Internal floating piston
• Nitrogen-charged
• 46mm high-flow piston
• Fast heat dissipation
• 36kN Tensile Strength
• Mounts inverted
• T6061 brushed aluminum body
• Free Shipping
• 3-year Manufacturer's Warranty

• This is a complete 2" leveling kit for the 2019 or Newer GM 1500 Truck Silverado and Sierra
• This level kit levels the front 2" to bring level to the rear
• Covered by our Limited Lifetime Warranty

• Liift leveling kit spacers and all hardware for the 2019 or Newer Chevrolet Silverado and GMC Sierra
• Detailed instruction manual walking you step-by-step through the leveling kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation

Designed to take advantage of the factory suspension geometry without overextending operating angles, these 3" system offer next level performance without the need to overhaul the suspension to correct the geometry like on the 4"+ kits. At the heart of these 3" systems are a pair of precision tuned FOX 2.5 performance elite series coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless aluminum body for better heat dispersion, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. A pair of reservoir mounting brackets are supplied to position the reservoirs. Complimenting the coilovers are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims.

For the rear of these 3" systems the stance is leveled out with a pair of 1.5" dual rate coil springs designed for exceptional ride quality and additional load capacity over stock. Your choice of rear FOX 2.0 Performance Series IFP gas shocks or upgrade FOX 2.5 Performance Elite Series DSC reservoir shocks are offered to match the front for next level performance and easy tuning to meet the demands out on the trail. As with all BDS kits these come ready to install right out the box with all hardware packs and step-by-step installation instructions.

Improve the look and capability of your RAM 1500 truck with this 3" Coilover System from BDS Suspension.

Tire & Wheel Combinations

• 33x12.50 w/20x9 and 4.5-5" back spacing
• 33x12.50 w/18x9 and 4.5-5" back spacing

*Trimming may be required*

Keep your front-end looking showroom new with the AVS Bugflector  an innovative high-profile hood shield with a wrap-around design. The AVS Bugflector  is constructed using proprietary, impact resistant ABS material, and it offers maximum coverage area to stop rocks from dinging your hood and to keep insects off your windshield. Car wash safe with an easy non-drill installation, the AVS Bugflector means minimal downtime without sacrificing protection for your vehicle.

FEATURES

• High profile, full-wrap hood shield
• Provides deflection to protect, hood, fenders and windshield
• Off-the-hood design for easy cleaning
• Impact-resistant acrylic in a dark smoke finish or as a chrome hood shield
• Custom molded with precision engineering to fit your vehicle
• Attaches with automotive-grade adhesive or mechanical fasteners
• Car-wash safe
• Made in the US

Give your truck an improved, aggressive look with Rough Country's 1.5in Leveling kit for Trailboss models! This easy-to-install kit levels your vehicle from front to rear giving you increased ground clearance to run larger tires while eliminating the nose-down factory look for a commanding presence that can't be ignored.

When it comes to leveling your vehicle, a small lift can make a huge difference! By lifting the front end of the vehicle to match the height of the rear, you get an instant transformation in looks and ground clearance that's sure to turn heads wherever you go. Includes a Lifetime Replacement Guarantee!

• Maintains factory ride quality
• Increased ground clearance
• Levels the front with the rear of the vehicle

• Fits very snug!
• Made to factory specifications.
• 4-Layer construction w/ foam padding and protective polyester shell.
• Neoprene layer offers great breathability and water resistance.
• Includes full covers for front seats - plus headrest covers where applicable.
• Front covers help protect your most-used seats from wear.
• Rear covers help protect your back seats from children and animal stains.

Specifications

*REQUIRES LOWER GRILL EXCHANGE*

COMMAND THE DARK: Add LED illumination to the front of your 19-21 RAM 1500 with Rough Country's 20in Hidden Bumper LED. This sleek, discreet lighting system blends in seamlessly with the front-end design, hidden behind the mesh grille on the factory front bumper.

This version has daytime running lights

This powerful LED application provides 120 watts of forward-facing illumination in a convenient 8 degree spot / 90 degree flood combo pattern for maximum viewability. Each Rough Country LED light features an IP67 waterproof rated durable diecast aluminium housing for a long lifespan or great performance. Each light features a premium wiring harness with in-line fuse for easy operation.

Choose from Rough Country's Black Series and DRL Series Light Bars.

• Easy installation.
• Looks like factory equipment.
• Durable black carbon powder coating.
• Includes Lifetime Replacement Guarantee

• NOTES - IMPORTANT

  • Does not fit Eco-Diesel models
  • Does not fit Rebel models

Rough Country's SF1 Fender Flares help you get the tough-looking finishing touch that your build deserves with a one-of-a-kind design. These flares complement the truck's body lines offering a clean look that will turn heads. The SF1 flare design gives the perfect amount of additional tire coverage for an oversized wheel and tire package and feature an integrated rear "mud catcher" to help reduce tire sling down the truck side. They are easy to install on your Chevy Silverado 1500, with excellent fitment right out of the box and includes all necessary hardware. The construction of these flares is from a durable ABS material that is both UV resistant for an uncoated install or paint-ready for a custom color match look.

Not only will you get the utility you need from these flares, but you'll also have a unique and aggressive look for your truck.? Whether you're looking for functionality or an accessory to tie your lift, wheels and tires together, Rough Country's SF1 fender flares deliver on all fronts.

• Color: Flat Black
• Tire Coverage: 2 in.
• Flare Height: 5.5 in.
• Quick and easy install with no drilling
• Added protection from rocks, mud and other road debris
• UV protected to prevent fading
• Built from a special Tri-Blend ABS material for maximum strength and durability
• Easily paintable to color match your truck
• Can be removed to bring truck back to stock
• 3-year limited warranty