*Please note 3-4 weeks delivery period*

These new lift systems are deigned to build off the factory mounting points to offer maximum ground clearance and improve suspension travel with clearance for up to 35" tires.

BDS ups the ante with new 3" UCA Lift Systems for the Chevy and GMC 2500HD/3500HD trucks. Built for easy bolt-on installation, these new 3" UCA Lift Systems offer next level performance designed around the OE suspension geometry and utilize the new FOX 2.5 Performance Elite Series shocks at each corner. These large aluminum-bodied shocks feature DSC (Dual Speed Compression) adjustable reservoirs for additional damping capacity, better heat dispersion and tuneable ride. These are paired with heavy duty BDS tubular upper control arms (UCAs) designed for improved strength and increased suspension travel. These new control arms are built from thick wall 1.5" DOM tubing, and use an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Along with the control arms, a pair of reindexed cast steel torsion bar keys are supplied up front to lift vehicle while maintaining ground clearance. A small differential relocation kit is supplied to correct CV axle operating angles without effecting ground clearance. To eliminate sway bar interference, a pair of sway bar relocation brackets is used which maintains proper operating angle. In the rear a 2" block and u-bolt kit is used to create a level to slightly tail high stance. This system utilizes next level damper performance for smooth on-road comfort and extreme off-road capability allowing you to push your truck harder. Take your HD to the next level with BDS and FOX.

Tire & Wheel Combinations

• 35x12.50 w/20x9 and 5.5-5.75" back spacing
• 295/60 w/20x9 and 5-5.75" back spacing
• 285/65 w/20x9 and 5-6.18" back spacing

*Trimming may be required*

Front and Rear covers to protect your seats from water, mud, and anything you can throw at it with Rough Country's front and rear Neoprene Seat Covers. These easy-to install covers fit snugly over your truck's seats to protect your interior from the elements while blending in perfectly

Please Note- rear seat is 2+1 seat config.

nique Acoustic insulation 3D all-weather liner. The acoustic coating on tough TPE base material. Insulating noise from the chassis and inside. The best protection for your vehicle interior ever. 

AMTRUX Floor-Liners are laser measured to protect the front, back, and even up the sides of your vehicle's footwell. For ultimate strength and dependability, Floor-Liners feature high-density core materials and are engineered with advanced surfacing that carries messes away from shoes and clothing. 

SET AND PACK:

2 front pieces?1 rear mat, 8 Kg? Carton Box. 

Fit:

Chevrolet Silverado 1500/2500/3500 crew cab made 2019 onwards. 

Features?

• Premium quality High-Density TPE (eco-friendly)
• Acoustic insulation coating
• High Gription
• Odourless 
• Premium Black Logo
• Custom Moulded and Laser Measurement
• Advanced Surfacing Design, Non-slip front or back 
• Special Design Fits the factory retention system
• Lower Reservoir Containment, Contain Debris & Fluids
• Easy Clean - Pressure Washable 
• Quick and Easy Installation & Removal
• 100% Fitment Guarantee

• Adhesive backed for easy peel & stick installation
• Measures: Silverado: 14.57"x 0.83" / LTZ: 3.93"x0.86"
• Package Including: 1X Silverado + 1x LTZ Emblem
• Made with high quality plastic material
• Waterproof and windproof.Please do the surface cleaning before fixing

• OEM Perfect Fit:
  The tailgate letters fit 2019-2023 Chevrolet Silverado. Sitting in the recessed area of the tailgate perfectly and make your truck POP!
  
  
• 100% Genuine 3M Certified Adhesive:
  Premium tailgate emblems with high-quality 3M tape on the back, which can resist long-term exposure to sunlight, rain or other severe weather. Are these car wash safe? Yes, make sure to clean the recesses before installation and they won't come off!
  
  
• Easy to Install:
  Only take 2-3 minutes to install the tailgate Decals Letters on your truck. It is better to warm up the paste position and 3m adhesive with a heat gun before applying them to your vehicle.
  
  
• Fantastic 3D Lettering:
  3D raised solid badge lettering is made of high-quality ABS with nice depth and bevel to create a cool 3D.

The Husky Liners X-act Contour perfectly matches the contours of your truck or SUV and brings together indestructible strength with a soft, comfortable cushion. Add to that a premium look and our exclusive features and you've got liner gold. Punch it, slap it, flick it, kick it. Can you feel it?

       Our FormFit Design process perfectly forms each liner to the detailed contours of your specific ride.

       No hassle lifetime guarantee. For details: HuskyLiners.com/ForLife

       Our exclusive StayPut Cleats help keep your liners securely in place.

       With both softness and strength, our rubberized DuraGrip material was designed with comfort in mind.

       Made in the USA.

Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.

The rugged 3.5" Oval Bull Bar includes an integrated 20" LED light bar - it not only defends your front-end, it also boosts your visibility.

The included heavy-duty light bar illuminates your night driving with a bright flood beam pattern and includes a wiring harness with a switch - everything you need to install. Match or accent your tough exterior with a Lund LED Bull Bar in your choice of black textured powder coat or polished T304 stainless steel finish.

The Lund LED Bull Bar includes a Lund-logoed steel skid plate and is backed by a 3-year limited warranty.

• Made from thick 3.5" oval heavy duty steel tubes
• Includes an integrated 20" heavy-duty LED light bar with flood beam pattern, 54watt, 3K lumens, as well as wiring harness with switch
• Stainless steel
• Includes a steel skid plate with Lund logo
• Backed by a three year Limited Warranty

*Please note 3-4 weeks delivery period*

BDS offers improved performance in a new smaller lift height with 3" UCA Lift Systems for the Chevy and GMC 2500HD/3500HD trucks. Designed for simple bolt-on installation, these kits allow clerance for up to 35" tires.

At the heart of this new system is a pair of heavy duty tubular upper control arms (UCAs) designed for improved strength and suspension travel. These new control arms are built from thick wall 1.5" DOM tubing, and use an indexed ball joint cup to reposition the upper ball joints to allow more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Along with the control arms, a pair of indexed cast steel torsion bar keys are supplied up front to lift vehicle. A small differential relocation kit is supplied to correct CV axle operating angles without effecting ground clearance. To eliminate sway bar interference, a pair of sway bar relocation brackets is used which maintains proper operating angle. In the rear a 2" block and u-bolt kit is used to create a level to slightly tail high stance when unloaded. Rounding out these kits are a pair of specially tuned FOX 2.0 performance series IFP shocks ready to soak up the terrrain. Take your HD to the next level with BDS Suspension.

Tire & Wheel Combinations

• 35x12.50 w/20x9 and 5.5-5.75" back spacing
• 295/60 w/20x9 and 5-5.75" back spacing
• 285/65 w/20x9 and 5-6.18" back spacing

AMTRUX form fit Mud Guards are made from durable, impact resistant all-weather thermoplastic that's as tough as nails (or rocks for that matter). They're easy to install, conform perfectly to your fenders, and protect your ride and those around you from the rage of the road.

• No Drilling Required
• Our form fit Mud Guards are tailored to match your fenders perfectly. If only our pants could fit like that.
• Built to the maximum width for full tread coverage of single or dually factory tires. We don't mess around with mess around.
• Our durable, impact resistant all-weather thermoplastic material holds up to whatever the road spits at it.
• The sleek style of our Form Fit Mud Guards give your ride a factory look, only better.

• Dimension: 12 inch length
• Package include:2x Z71 Badges
• Material: Premium Automotive ABS/PC
• Attach With 3M tape for better adhesion.
• Installation: Clean and dry surface before application. Simply peel off the protective layer of the double sided tape. Allow the sticker to completely dry for 48 hours before exposing it to moisture/water.

Husky Truck Bed Mats protect your cargo from scratches and minimizes it from shifting around in transit.

• No hassle lifetime guarantee. For details: HuskyLiners.com/ForLife
• Made in the USA.
• Available in two surface options, UltraFiber and UltraGrip. Both create a flat, ultra-tough, impact resistant surface that protects your cargo and truck to boot.
• The Anti-skid surface keeps everything in place.
• GapGuard keeps your smaller cargo from getting lodged between your bed and tailgate.
• Doesn't absorb water and will not mold or mildew. Clean it with a hose, power washer or vacuum-good as new.
• Our Truck Bed Mat turns your truck bed into a soft, flat surface making it a joy to work out of, a breeze to load cargo and clean up is a snap.
• No hassles, no guff. If you have a problem, we'll replace it. Capeesh? For details: HuskyLiners.com/ForLife

AMTRUX side steps are a great improvement on STD The extra length and step pad allow easy access to the front of your tub whilst adding a dressed edge to the full length of the cab

Features:

• Highly polished Stainless Steel with Nylon tread areas
• Steel brackets and all fitting hardware
• 5inch oval bar with LARGE Full Width Stomp Pads
•  XL Cab Length to access tub
• Curved front end
• Patented Design

Fox Racing Shox 2.0 Performance Series IFP Smooth Body Shocks

Fox Racing Shox 2.0 Performance Series IFP smooth body shocks deliver race-dominating performance in a hassle-free bolt-on package. Their heat-reducing design includes a metal-impacted aluminum shock body that dissipates heat faster than conventional steel. Inside, the Internal Floating Piston (IFP) separates the shock oil from a high-pressure nitrogen gas chamber, providing a predicable ride quality capable of handling the roughest road conditions. Combine these new technologies by Fox Racing Shox, together with a competitive price-and you have a winning combination! Choose the universal or vehicle-specific model that best suits your application.

Tech specs of 2.0 Performance Series IFP smooth body shocks:

* Aluminum shock body dissipates heat, will resist rust over time
* Clear-anodized for a durable finish
* Application-specific valving to maximize off-road performance
* Components: black anodized billet aluminum
* Shaft: hard chrome plated heat-treated alloy steel
* Race-developed high-flow piston design
* Quiet nitrile rubber bushings for increased suspension articulation
* Redundant sealing pack system main seal, wiper seal, scraper seal
* JM92 advanced suspension fluid for improved performance at variable temperatures
* Extended length applications available for stock and aftermarket lifts kits
* Optional roost shield kit available (sold separately) to protect shock shaft and seals from rocks kicked up by tires

• OEM Perfect Fit:
  The tailgate letters fit 2019-2023 Chevrolet Silverado. Sitting in the recessed area of the tailgate perfectly and make your truck POP!
  
  
• 100% Genuine 3M Certified Adhesive:
  Premium tailgate emblems with high-quality 3M tape on the back, which can resist long-term exposure to sunlight, rain or other severe weather. Are these car wash safe? Yes, make sure to clean the recesses before installation and they won't come off!
  
  
• Easy to Install:
  Only take 2-3 minutes to install the tailgate Decals Letters on your truck. It is better to warm up the paste position and 3m adhesive with a heat gun before applying them to your vehicle.
  
  
• Fantastic 3D Lettering:
  3D raised solid badge lettering is made of high-quality ABS with nice depth and bevel to create a cool 3D.