Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
Our cold air intake for the 2020 Silverado 6.2L was engineered to minimize air restriction and flows 51.69% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.
Featuring a massive, highly efficient air filter that snaps into the airbox easily and securely, providing an airtight seal. With our new snap in filter design, you can install and inspect your filter in seconds. Available in either 8-layer Cotton Cleanable or Dry Extendable media.
Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim ensures an airtight seal, protecting against unwanted, power-robbing engine heat.
The Mass Airflow Sensor is relocated further down the S&B intake tube allowing for further airflow improvements. We got you covered with our included MAF extension harness.
The air filter, coupler, lid seal and plug seal are all made with silicone. Silicone is a premium rubber which will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.
Check out the sound of the intake when installed in the truck. A huge air filter and air box results in a more aggressive sound compared to stock.
Give your truck an improved, aggressive look with Rough Country's 1.5in Leveling kit for Trailboss models! This easy-to-install kit levels your vehicle from front to rear giving you increased ground clearance to run larger tires while eliminating the nose-down factory look for a commanding presence that can't be ignored.
When it comes to leveling your vehicle, a small lift can make a huge difference! By lifting the front end of the vehicle to match the height of the rear, you get an instant transformation in looks and ground clearance that's sure to turn heads wherever you go. Includes a Lifetime Replacement Guarantee!
The M-Series retractable truck bed cover provides you the security of a hard cover, smooth appearance of a soft cover, and convenience of a retractable cover. Its durable vinyl-over-aluminum hybrid cover design is dedicated to four season protection and optimal bed security. It tackles durability while remaining exceptionally easy to operate with its unique frictionless construction and insulated grip lever. Simply use its key to unlock the cover and begin to open towards the cab as it retracts into its compact canister. The M-Series can open, lock and close without even opening the truck's tailgate and locks in multiple open positions. Checking the box for unmatched convenience and quick access to your bed and gear. Roll-N-Lock's M-Series retractable truck bed cover has a quick and easy install, and backed by a 3 year warranty.
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
The rugged 3.5" Oval Bull Bar includes an integrated 20" LED light bar - it not only defends your front-end, it also boosts your visibility.
The included heavy-duty light bar illuminates your night driving with a bright flood beam pattern and includes a wiring harness with a switch - everything you need to install. Match or accent your tough exterior with a Lund LED Bull Bar in your choice of black textured powder coat or polished T304 stainless steel finish.
The Lund LED Bull Bar includes a Lund-logoed steel skid plate and is backed by a 3-year limited warranty.
Get a killer, level look for your vehicle with Rough Country's 1.5-2-inch Torsion Key Leveling Kit for 2020 GM HD Trucks. This easy-to-install leveling kit raises the front of your truck to be level with the rear, providing increased ground clearance for larger wheels and tires and aggressive, good looks.
This kit includes a set of forged torsion bar keys, engineered to be considerably stronger than the stock torsion keys or cast steel aftermarket parts. These durable, forged torsions keys feature a corrosion resistant powder coat to withstand the elements and install easily, with no cutting or drilling required. A set of optional N3 Nitrogen-charged shock absorbers offer 10-stage variable valving and incredible performance for on or off-road driving!
Best of all, this kit features a Lifetime Replacement Guarantee
At the heart of this new system is a pair of heavy duty tubular upper control arms (UCAs) designed for improved strength and suspension travel. These new control arms are built from thick wall 1.5" DOM tubing, and use an indexed ball joint cup to reposition the upper ball joints to allow more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Along with the control arms, a pair of indexed cast steel torsion bar keys are supplied up front to lift vehicle. A small differential relocation kit is supplied to correct CV axle operating angles without effecting ground clearance. To eliminate sway bar interference, a pair of sway bar relocation brackets is used which maintains proper operating angle. In the rear a 2" block and u-bolt kit is used to create a level to slightly tail high stance when unloaded. Rounding out these kits are a pair of specially tuned FOX 2.0 performance series IFP shocks ready to soak up the terrrain. Take your HD to the next level with BDS Suspension.
Tire & Wheel Combinations
BDS ups the ante with new 3" UCA Lift Systems for the Chevy and GMC 2500HD/3500HD trucks. Built for easy bolt-on installation, these new 3" UCA Lift Systems offer next level performance designed around the OE suspension geometry and utilize the new FOX 2.5 Performance Elite Series shocks at each corner. These large aluminum-bodied shocks feature DSC (Dual Speed Compression) adjustable reservoirs for additional damping capacity, better heat dispersion and tuneable ride. These are paired with heavy duty BDS tubular upper control arms (UCAs) designed for improved strength and increased suspension travel. These new control arms are built from thick wall 1.5" DOM tubing, and use an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Along with the control arms, a pair of reindexed cast steel torsion bar keys are supplied up front to lift vehicle while maintaining ground clearance. A small differential relocation kit is supplied to correct CV axle operating angles without effecting ground clearance. To eliminate sway bar interference, a pair of sway bar relocation brackets is used which maintains proper operating angle. In the rear a 2" block and u-bolt kit is used to create a level to slightly tail high stance. This system utilizes next level damper performance for smooth on-road comfort and extreme off-road capability allowing you to push your truck harder. Take your HD to the next level with BDS and FOX.
Tire & Wheel Combinations
*Trimming may be required*
Husky Liners form fit Mud Guards are made from durable, impact resistant all-weather thermoplastic that's as tough as nails (or rocks for that matter). They're easy to install, conform perfectly to your fenders, and protect your ride and those around you from the rage of the road.
Husky Liners form fit Mud Guards are made from durable, impact resistant all-weather thermoplastic that's as tough as nails (or rocks for that matter). They're easy to install, conform perfectly to your fenders, and protect your ride and those around you from the rage of the road.
The all-new Pro X15 includes many of the same great features as our #1 selling cover, the Lo Pro, but with added style and performance. New 15 degree rails deliver an Xtra-low profile, flush-mount look on the truck bed, and superior-grade woven fabric provides a stylish matte-black appearance.
The cover can be installed or removed in minutes, with no drilling required, and the unique self-leveling design feature allows for a more accurate installation. The Pro X15 is backed with a Lifetime Warranty.
The TopperEZLift is a self-install topper lifting system. This all electric system is powered directly from your vehicles' 12 volt battery. Which means no hydraulics or air to worry about. While holding the safety switch select up or down on the control box, operation is that easy!
The linear actuators are capable of lifting a total of 900 lbs with a lifting height of 17.5 inches, and seals firmly back down onto your truck bed. Eliminate headaches from removing your topper on those large loads, eliminate crawling on your hands and knees to reach your cargo, simply lift the topper up to solve those problems.
The TopperEZLift fits all standard pick-ups and your existing topper. The topper and truck are not included.
With the camper package add-on you have a quick and easy "pop-up" camper in just seconds. Large zippered side windows allow for easy side load access, good ventilation and a big view of those amazing vistas! Hauling, camping, fishing, hunting and all your outdoor activities just became that much easier!
The Weekender Camper Package Includes the 3 side panels and the Weekender Back. The Weekender Back Utilizes the tailgate for extra room and is perfect for short bed pick-ups needing to maximize sleeping space and the entrance functions similar to a traditional dome-style tent.
The Contractor Camper Package includes the 3 side panels and the Contractor Back. The advantage of the Contractor Package is that it easily rolls up into the inside of the topper and out of the way allowing you to use your truck without removing the Camper Back. Keep in mind the Contractor Back does not utilize the tailgate and is best used on long box pick-ups.
A TopperLift Kit with our Weekend Camper package transforms your existing truck and topper into a cozy pop-up camper in seconds!. Large zippered side windows allow for easy side load access, good ventilation and a big view of those amazing vistas! Hauling, camping, fishing, hunting, and all your outdoor activities just became that much easier! The Weekender Camper Package Includes the 3 side panels and the Weekender Back. The Weekender Back Utilizes the tailgate for extra room and is perfect for short bed pick-ups needing to maximize sleeping space and the entrance functions similar to a traditional dome-style tent.
*Please Note topper or portion of topper where Camper Package attaches needs to be carpeted*
Wiring | 2 Pin ATP Plug |
---|---|
Specification2 | Dimensions - A X B X C: 524 X 67 X 52mm |
Number of LED's | 15 X 10W OSRAM |
Beam Distance | 1088M Max @ 0.25 lux |
Lux @ 10m | 2964LX Max |
Beam Pattern | Projector Combo 6 Driving/9 Spot |
LUMENS | 9560LM Max Effective |
Current Draw | 6.2-10.6A |
Wattage | 127W |
Warranty | 7 Years |
Brand | ROADVISION |
IP Rating | IP67 |
Input Voltage | 10-30VDC |
Specification1 | Beam Distance 2: 544M @ 1 Lux |