Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior to entry of the engine - increasing performance, as well as improving throttle response and fuel efficiency.
In recent testing, the Street Version produced +33 HP and +30 lbs. x ft. TQ on our in-house dyno (tested on a 2014 Toyota Tundra V8-5.7L).
Headers:
Connection Pipes:
Our Twisted Steel long tube header and y-pipe added an astounding +32 HP and +44 lbs. x ft.
Twisted Steel Long Tube Headers Features:
Y-Pipe (Street Version) Features:
This BladeRunner GT Series Intercooler kit represents the next generation of intercoolers. The BladeRunner intercoolers utilize a 3" bar and plate core design that is larger than stock. This kit outflows the OE intercooler set up for more power.
End Tanks:
The unique BladeRunner end tanks are constructed out of 3/16'' TIG-Welded aluminum plates.
3" Bar and Plate Core Design:
The use of the bar and plate core design allows for greater airflow.
Billet Aluminum Inlet/Outlets:
This BladeRunner Intercooler uses 3" inlets and outlets for superior strength and durability..
TIG-Welded:
100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.
Condensation Drain:
The intercooler includes a 1/8" NPT vent, which can be used to drain any type of build up from the intercooler.
Perfect Fit:
Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes high quality stainless steel spring loaded t-bolt clamps and heavy-duty 5-Ply couplings for strength.
Flow and Performance:
aFe Power's intercooler tube are constructed from 3" mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tube from engine heat and protects the tube from corrosion. The smooth transition bends decrease turbulence, minimize pressure loss, while increasing horsepower and torque. Also included is four 1/8" NPT port which is provided for a sensor or water-methanol injection.
aFe Badging:
A unique laser-cut aFe power logo plate is welded-onto the intercooler tubes for an aggressive style.
Power, quality and sound is what this Large Bore-HD series down-pipe back exhaust system offers. 4" mandrel-bent 409 stainless steel tubing and high-flow muffler are less restrictive keeping exhaust pulses flowing smoothly for increased power gains. High-temp black powder coated stainless steel exhaust tip completes the look. Factory style hangers, quality band clamps and all necessary hardware ensure a quick install and long-lasting exhaust that looks as good as it performs.
Flow and Performance:
This Large Bore-HD exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum flow and longevity. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lower EGT's.
High Flow 409 Stainless Steel Muffler:
This 409 stainless steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration, but maintain a smooth sound at idle. Stamped with an aFe POWER logo for an aggressive style. Muffler Specifications: 4" Center Inlet /Outlet, 8" Round x 24" Length Body.
6" Diameter Black Tip:
This system is finished off with a 6" high-temp. black powder-coated slash cut tip. A unique laser-cut aFe Power logo plate is riveted on for a custom, quality finish.
OE Fit:
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.
Fits: CC/SB (151.6" Wheelbase/6.6ft. bed)
High Flow 409 Stainless Steel Muffler:
This 409 stainless steel High-Flow muffler is designed to provide a deep throaty, powerful sound on acceleration, but maintain a smooth sound at idle. This muffler is constructed uses a straight through perforated core with heat resistant packing to reduce backpressure and maximize flow. Also featuring a stamped aFe POWER logo for an added style. Muffler Specifications: 4" Center Inlet /Outlet, 8" Round x 24" L Body Diameter.
OE Fit:
Features OE-style bayonet hangers to maintain stability during high-rev vibration and high-temp conditions. Provides hassle-free installation.
Flow and Performance:
This Rebel XD exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and throttle response.
Exhaust Tips:
Finishing off this exhaust are dual 5" black stainless steel straight-cut intercooled exhaust tips featuring a laser-cut stainless steel "aFe POWER" badge for added style.
Fits:
2017 Chevrolet Silverado HD 2500/3500 V8-6.6L (td) Duramax
2017 GMC Sierra HD 2500/3500 V8-6.6L (td) Duramax
Wheelbases:
Extended Cab/Short Bed, 6.6 ft. Bed, 143.5 Wheelbase
Crew Cab/Short Bed, 6.6 ft. Bed, 153.7 Wheelbase
Extended Cab/Long Bed, 8 ft. Bed, 158.1 Wheelbase
Crew Cab/Long Bed, 8 ft. Bed, 167.7 Wheelbase
Note 1:
Cutting is required for some cab configurations.
aFe is proud to introduce the MACH Force XP Cat-Back exhaust system for the 2009-2017 Dodge/RAM 1500 with the V8-5.7L HEMI engine. This exhaust system outflows the factory exhaust by 130%. This cat-back exhaust is constructed of 3" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with dual gloss black 304 stainless steel, double wall slash cut tips for an aggressive style.
Installation is a Snap:
This MACH Force XP exhaust system use all factory mounting locations providing stability and a hassle-free installation.
Leak-Free Seal:
High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths.
Aggressive Sound:
A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.
Perfect Fit:
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
aFe is proud to introduce the MACH Force XP Cat-Back exhaust system for the 2009-2017 Dodge/RAM 1500 with the V8-5.7L HEMI engine. This exhaust system outflows the factory exhaust by 130%. This cat-back exhaust is constructed of 3" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with dual gloss black 304 stainless steel, double wall slash cut tips for an aggressive style.
Installation is a Snap:
This MACH Force XP exhaust system use all factory mounting locations providing stability and a hassle-free installation.
Leak-Free Seal:
High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths.
Aggressive Sound:
A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.
Perfect Fit:
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.