clear

Sign In

your password
check_boxKeep me signed in

Can't access your account? | Register

fullscreen fullscreen_exit done_all launch
  • BULL BARS / BUMPERS / NUDGEexpand_more
  • Show All
  • CARGOGLIDE / CARGO DRAWERSexpand_more
  • Show All
  • FLOOR MATS AND LINERSexpand_more
  • Show All
  • SPORTS BAR / ROLL BARSexpand_more
  • Show All
  • TUB LINERS / BED LINERSexpand_more
  • Show All
 Ram 1500 2009-2019  V8 5.7L Hemi Silver Bullet Throttle Body Spacer AFE Polished 46-32007
zoom_in
Ram 1500 2009-2019 V8 5.7L Hemi Silver Bullet Throttle Body Spacer AFE AFE POWER
$348.70
46-32007
check_box_outline_blankShow Comparison

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior to entry of the engine - increasing performance, as well as improving throttle response and fuel efficiency.

  • Constructed from Durable 6061-T6 Billet Aluminum
  • Unique Serrated/Helix Entry Design Creates Turbulence and Eliminates Whistle Sound
  • Increases Air Intake Speed, Improving Performance & Throttle Response
Free Shipping
local_shipping
Chevrolet 2500 2017-19 V8-6.6L 4 inch Rebel XD Series 409 Stainless Steel Down-Pipe Back Exhaust System with Black TipsaFe Power 49-44092-B
zoom_inchevron_leftchevron_right
Chevrolet 2500 2017-19 V8-6.6L 4 inch Rebel XD Series 409 Stainless Steel Down-Pipe Back Exhaust System with Black TipsaFe Power AFE POWER
$1,999.80
49-44092-B
check_box_outline_blankShow Comparison

High Flow 409 Stainless Steel Muffler:
This 409 stainless steel High-Flow muffler is designed to provide a deep throaty, powerful sound on acceleration, but maintain a smooth sound at idle. This muffler is constructed uses a straight through perforated core with heat resistant packing to reduce backpressure and maximize flow. Also featuring a stamped aFe POWER logo for an added style. Muffler Specifications: 4" Center Inlet /Outlet, 8" Round x 24" L Body Diameter.

OE Fit:
Features OE-style bayonet hangers to maintain stability during high-rev vibration and high-temp conditions. Provides hassle-free installation.

Flow and Performance:
This Rebel XD exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and throttle response.

Exhaust Tips:
Finishing off this exhaust are dual 5" black stainless steel straight-cut intercooled exhaust tips featuring a laser-cut stainless steel "aFe POWER" badge for added style.

Fits:
2017 Chevrolet Silverado HD 2500/3500 V8-6.6L (td) Duramax
2017 GMC Sierra HD 2500/3500 V8-6.6L (td) Duramax

Wheelbases:
Extended Cab/Short Bed, 6.6 ft. Bed, 143.5 Wheelbase
Crew Cab/Short Bed, 6.6 ft. Bed, 153.7 Wheelbase
Extended Cab/Long Bed, 8 ft. Bed, 158.1 Wheelbase
Crew Cab/Long Bed, 8 ft. Bed, 167.7 Wheelbase

Note 1:
Cutting is required for some cab configurations.

Chevrolet 2500 2017-2019 6.6L Cold Air Intake S and B Filters 75-5103
zoom_inchevron_leftchevron_right
Chevrolet 2500 2017-2019 6.6L Cold Air Intake S and B Filters S&B FILTERS
$798.60
75-5103
check_box_outline_blankShow Comparison
Our cold air intake for the 2017-2018 Silverado / Sierra Duramax 6.6L was engineered to minimize air restriction and flows 43.86% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor.
Preorder
bookmark
Chevrolet 2500 2017-2019 V8-6.6L Rebel XD Series 5inch 409 Stainless Steel Down Pipe Back Exhaust System aFe Power 49-44087-B
zoom_inchevron_leftchevron_right
Chevrolet 2500 2017-2019 V8-6.6L Rebel XD Series 5inch 409 Stainless Steel Down Pipe Back Exhaust System aFe Power AFE POWER
$1,910.70
49-44087-B
check_box_outline_blankShow Comparison

High Flow 409 Stainless Steel Muffler:
This 409 stainless steel High-Flow muffler is designed to provide a deep throaty, powerful sound on acceleration, but maintain a smooth sound at idle. This muffler is constructed uses a straight through perforated core with heat resistant packing to reduce backpressure and maximize flow. Also featuring a stamped aFe POWER logo for an added style. Muffler Specifications: 5" Center Inlet /Outlet, 8" Round x 24" L Body Diameter.

OE Fit:
Features OE-style bayonet hangers to maintain stability during high-rev vibration and high-temp conditions. Provides hassle-free installation.

Flow and Performance:
This Large Bore-HD exhaust system is constructed of 5" mandrel-bent 409 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and throttle response.

Exhaust Tip:
Finishing off this exhaust is a 7-inch black stainless steel slash-cut exhaust tip featuring a laser-cut stainless steel "aFe POWER" badge for added style.

Fits:
2017 Chevrolet Silverado HD 2500/3500 V8-6.6L (td) Duramax
2017 GMC Sierra HD 2500/3500 V8-6.6L (td) Duramax

Wheelbases:
Extended Cab/Short Bed, 6.6 ft. Bed, 143.5 Wheelbase
Crew Cab/Short Bed, 6.6 ft. Bed, 153.7 Wheelbase
Extended Cab/Long Bed, 8 ft. Bed, 158.1 Wheelbase
Crew Cab/Long Bed, 8 ft. Bed, 167.7 Wheelbase

Note 1:
Cutting is required for some cab configurations.

Preorder
bookmark
Chevrolet and GMC 2011-2016 Duramax LML 6.6L Cold Air Intake 75-5075-1
zoom_inchevron_leftchevron_right
Chevrolet and GMC 2011-2016 Duramax LML 6.6L Cold Air Intake S&B FILTERS
$1,018.60
75-5075-1
check_box_outline_blankShow Comparison
Our cold air intake for the 2011-2016 Chevy / GMC Duramax 6.6L was engineered to minimize air restriction and flows 29.10% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor.
Chevrolet Silverado 1500 19-21 Pulsar LT by Superchips 22451
zoom_inchevron_leftchevron_right
Chevrolet Silverado 1500 19-21 Pulsar LT by Superchips SUPERCHIPS
$799.00
22451
check_box_outline_blankShow Comparison



It's Your Truck. Set It Up the Way You Want It.

Seriously. With Pulsar LT you can configure many features exactly how you want them all at your finger tips. Our state-of-the-art in-line control module plugs into your vehicle harness under the hood and allows you full adjustability of many features via your steering wheel controls. Recalibrate your speedometer for larger tires and gear ratio changes. Adjust your tire pressure sensor thresholds to allow running lower pressures with aftermarket wheel and tire combos. Change your top speed limiter (up to 140-mph). Disable your Auto Start/Stop function. Deactivate the frustrating Dynamic Fuel Management (DFM) system so you're truck remains in 8-cylinder mode all the time. Even adjust your throttle pedal sensitivity to eliminate that dead pedal feeling and lag from a stop.


Superchips Innovation

Superchips has invested heavily in resources to continue bringing the most cutting-edge products to market. This has been especially important to us with the 2019-2020 Chevrolet Silverado and GMC Sierra markets. Overwhelming demand from truck owners for aftermarket support for this platform led us to develop Pulsar LT. You are get an innovative product with tremendous features unlike any other on the market today, that offers a driving experience that has been engineered to leave you beyond impressed.  Review the video clips below to understand what comes in the box, how to install the Pulsar LT module, and learn how to manage the exciting features directly from your steering wheel.


So. Many. Features.

1) Recalibrate speedometer for tire size changes up to 51 inches
2) Recalibrate for gear axle ratio changes up to 6.00
3) Adjust top speed limiter up to 140mph
4) Adjust Tire Pressure Monitoring System thresholds between 1-99psi
5)Enable/Disable engine Auto Start/Stop feature
6) Enable/Disable Dynamic Fuel Management
7) Clear diagnostic trouble codes
8) Adjust throttle pedal sensitivity


Pulsar LT is currently available for all 2019-2021 5.3L and 6.2L V8 applications. This coverage includes both 8 and 10-speed transmission applications. Our engineering team is working diligently to expand this product coverage for other engines and model years, and we hope to have those other applications available soon.

New
bookmark
DFS780 Fuel System - Boost Activated I Chevrolet 2017 6.6L 42-14024
zoom_inchevron_leftchevron_right
DFS780 Fuel System - Boost Activated I Chevrolet 2017 6.6L AFE POWER
$1,938.20
42-14024
check_box_outline_blankShow Comparison

Clear High-Impact Polycarbonate Sight Glass:
Allows visual inspection of fuel.

Helical Bronze Spur Gears:
Bronze gears more forgiving of contaminants than steel gears. The helical spur gear design runs quieter than straight cut gears.

Billet 6061-T6 Aluminum Manifold:
Eliminates porosity concerns with cast aluminum.

"Marine Grade" Motor:
Protected against dust intrusion and powerful water jets.

Plug & Play Installation:
Supplied harness attaches directly to battery and utilizes Deutsch weather-proof connectors. No cutting or modifications of the stock fuel lines required.  Vehicle can easily be returned to stock.

Relay Controlled:
The DFS780 is powered by your ignition and can be run independently or in conjunction with the stock fuel pump.

PEEK Bearing Wear Surfaces:
The DFS780 spur gears ride on PEEK (Polyether Ether Ketone) bearing surfaces to reduce both noise and wear.

Contoured CNC Machining Of Manifold Passages:
Enhances flow through the manifold to reduce pressure drop due to flow restrictions.

Direct Bolt-on Steel Mounting Bracket:
Heavy duty bracket mounts to the frame and utilizes existing hole to secure.

Fuel Pressure Gauge Port:
1/8 NPT port allows customer to attach an external pressure gauge to monitor fuel pressure.

O.E Quality Viton Seals:
Compatible with diesel and biodiesel fuels.

DFS780 Fuel System - Full-Time Operation I Ford F250/F350 2017 V8-6.7L 42-12035
zoom_inchevron_leftchevron_right
DFS780 Fuel System - Full-Time Operation I Ford F250/F350 2017 V8-6.7L AFE POWER
$1,938.20
42-12035
check_box_outline_blankShow Comparison

Clear High-Impact Polycarbonate Sight Glass:
Allows visual inspection of fuel.

Helical Bronze Spur Gears:
Bronze gears more forgiving of contaminants than steel gears. The helical spur gear design runs quieter than straight cut gears.

Billet 6061-T6 Aluminum Manifold:
Eliminates porosity concerns with cast aluminum.

"Marine Grade" Motor:
Protected against dust intrusion and powerful water jets.

Plug & Play Installation:
Supplied harness attaches directly to battery and utilizes Deutsch weather-proof connectors. No cutting or modifications of the stock fuel lines required.  Vehicle can easily be returned to stock.

Relay Controlled:
The DFS780 is powered by your ignition and can be run independently or in conjunction with the stock fuel pump.

PEEK Bearing Wear Surfaces:
The DFS780 spur gears ride on PEEK (Polyether Ether Ketone) bearing surfaces to reduce both noise and wear.

Contoured CNC Machining Of Manifold Passages:
Enhances flow through the manifold to reduce pressure drop due to flow restrictions.

Direct Bolt-on Steel Mounting Bracket:
Heavy duty bracket mounts to the frame and utilizes existing hole to secure.

Fuel Pressure Gauge Port:
1/8 NPT port allows customer to attach an external pressure gauge to monitor fuel pressure.

O.E Quality Viton Seals:
Compatible with diesel and biodiesel fuels.

Ford F-250,F-350 2017-2019 V8-6.7L Rebel XD Series 4inch 409 Stainless Steel Down Pipe Back Exhaust System w/Dual Black Tips aFe 49-43096-B
zoom_inchevron_leftchevron_right
Ford F-250,F-350 2017-2019 V8-6.7L Rebel XD Series 4inch 409 Stainless Steel Down Pipe Back Exhaust System w/Dual Black Tips aFe AFE POWER
$1,621.40
49-43096-B
check_box_outline_blankShow Comparison

aFe's Rebel XD Series, dual tip downpipe-back exhaust system for your 2017-2019 Ford Super Duty with the V8-6.7L (td) Power Stroke diesel performs as good as it looks. The Rebel XD system is constructed with 4" mandrel bent 409 stainless steel tubing for improved exhaust flow, lowering EGT's for more HP and torque. Utilizing factory mounting locations, the bayonet tip hangers ensure the Rebel XD exhaust has an OE-style fit and stays put under any driving conditions. MIG welded for durability the Rebel XD comes with high quality band clamps and hardware to provide a quick, hassle-free installation with no modifications necessary. Dual 5" straight cut, high-temp powder coated black stainless steel tips with intercooling vents reduce EGT's at the tailpipe and are badged with laser-cut aFe POWER plates to finish off the Rebel XD exhaust system for the perfect combination of performance, value and style.

Flow and Performance:
This Rebel XD Series exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing and high-flow muffler for maximum flow and durability. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's.

OE Fit:
OE-style bayonet hangers are used to maintain a stable pipe location under any driving conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. All systems use factory mounting locations providing a hassle-free installation.

Leak-Free Seal:
High quality band clamps are included for a complete 360-degree sealing surface.

Dual 5" Diameter High Temp Black Intercooled Tips:
Finishing off the exhaust are Dual 5" straight cut, high-temp powder coated black stainless steel tips with intercooling vents reduce EGT's at the tailpipe and are badged with laser-cut aFe POWER plates riveted on each tip.

Note:
Some cutting may be required on some cab configurations.

Wheelbases:
Standard Cab / Long Bed, 8ft bed, 141.6" wheelbase
Extended Cab / Short Bed, 6.75ft bed, 148" wheelbase
Crew Cab / Short Bed, 6.75ft bed, 160" wheelbase
Extended Cab / Long Bed, 8ft bed, 164.2" wheelbase
Crew Cab / Long Bed, 8ft bed, 176" wheelbase

Preorder
bookmark
Ford F150 2015-2017 5.0L Cold Air Intake S and B Filters 75-5083
zoom_inchevron_leftchevron_right
Ford F150 2015-2017 5.0L Cold Air Intake S and B Filters S&B FILTERS
$798.60
75-5083
check_box_outline_blankShow Comparison
Our cold air intake for the 2015-2016 Ford F-150 5.0L was engineered to minimize air restriction and flows 40% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.
Ford F150 2015-2017 V8 5.0L 3 inch Mach Force-XP 409 Stainless Steel Cat-Back Exhaust System with Polished Tips aFe Power 49-43074-P
zoom_inchevron_leftchevron_right
Ford F150 2015-2017 V8 5.0L 3 inch Mach Force-XP 409 Stainless Steel Cat-Back Exhaust System with Polished Tips aFe Power AFE POWER
$2,032.80
49-43074-P
check_box_outline_blankShow Comparison

aFe power introduces the MACH Force-Xp dual side-exit cat-back exhaust system for the 2015-2017 Ford F-150 with V8-5.0L engines. This cat-back exhaust is constructed out of 3", 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends allow for low turbulence, increasing horsepower, torque and improving throttle response. In testing, this system added an astounding +9 horsepower and +17 lbs. x ft. of torque as verified by our in house dyno. A free-flow 21" single-in dual out muffler is included which improves performance across the power band while maintaining an awesome sound. To finish off the exhaust, dual side-exit black tips are used. The tips come with laser-cut aFe Power badges for an aggressive style. This exhaust system fits Crew Cab/Short Bed, Extended Cab/Short Bed, Crew Cab/Long Bed, & Extended Cab/Long Bed.

Installation is a Snap:
This MACH Force XP exhaust system uses all factory mounting locations and is supplied with all necessary hardware including OE style hangers for the perfect fit and finish.

Leak-Free Seal: 
High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths.

Aggressive Sound: 
A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Perfect Fit: 
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Each system comes with a OE style isolation mount for a perfect OE fit and finish.

Notes: Only fits Crew Cab/Short Bed (145" wheelbase), Extended Cab/Short Bed (145" Wheelbase), Crew Cab/Long Bed (156.8" Wheelbase), & Extended Cab/Long Bed (163.7" Wheelbase)

Preorder
bookmark
Ford F150 2015-2017 V8-5.0L Mach Force-XP 3 Inch Exhaust Black Tips aFe Power 49-43074-B
zoom_inchevron_leftchevron_right
Ford F150 2015-2017 V8-5.0L Mach Force-XP 3 Inch Exhaust Black Tips aFe Power AFE POWER
$2,234.10
49-43074-B
check_box_outline_blankShow Comparison

aFe power introduces the MACH Force-Xp dual side-exit cat-back exhaust system for the 2015-2017 Ford F-150 with V8-5.0L engines. This cat-back exhaust is constructed out of 3", 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends allow for low turbulence, increasing horsepower, torque and improving throttle response. In testing, this system added an astounding +9 horsepower and +17 lbs. x ft. of torque as verified by our in house dyno. A free-flow 21" single-in dual out muffler is included which improves performance across the power band while maintaining an awesome sound. To finish off the exhaust, dual side-exit black tips are used. The tips come with laser-cut aFe Power badges for an aggressive style. This exhaust system fits Crew Cab/Short Bed, Extended Cab/Short Bed, Crew Cab/Long Bed, & Extended Cab/Long Bed.

Installation is a Snap:
This MACH Force XP exhaust system uses all factory mounting locations and is supplied with all necessary hardware including OE style hangers for the perfect fit and finish.

Leak-Free Seal: 
High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths.

Aggressive Sound: 
A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Perfect Fit: 
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Each system comes with a OE style isolation mount for a perfect OE fit and finish.

Notes: Only fits Crew Cab/Short Bed (145" wheelbase), Extended Cab/Short Bed (145" Wheelbase), Crew Cab/Long Bed (156.8" Wheelbase), & Extended Cab/Long Bed (163.7" Wheelbase)

Preorder
bookmark
Ford F150 2015-2018 V6-3.5L BladeRunner GT Series Intercooler with Tube AFE 46-20292-B
zoom_in
Ford F150 2015-2018 V6-3.5L BladeRunner GT Series Intercooler with Tube AFE AFE POWER
$3,065.70
46-20292-B
check_box_outline_blankShow Comparison

This BladeRunner GT Series Intercooler represents the next generation of intercoolers. Designed specifically for the 2017 Ford F-150 Raptor 3.5L (tt) Ecoboost, this BladeRunner intercooler utilizes a 3" bar and plate core design. The end tanks are constructed of 3/16" 5052 aluminum and TIG-Welded for superior strength and durability. aFe has also added CNC machined ports which can be used for a condensation drain, sensors, or water methanol injection.

End Tanks:
The unique BladeRunner end tanks are constructed out of 3/16'' TIG-Welded aluminum plates.

3" Bar and Plate Core Design:
The use of the bar and plate core design allows for greater airflow and better efficiency.

Billet Aluminum Inlet/Outlets:
This BladeRunner Intercooler uses dual 2-1/2" inlets and a 3" outlet for superior strength and durability.

TIG-Welded:
100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.

Flow and Performance:
aFe Power's cold side tube is constructed from 3-1/2" and 3" mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp powder-coating also insulates the tube from engine heat and protects the tube from corrosion. The smooth transition bends decrease turbulence, minimize pressure loss, while increasing horsepower and torque. This tube is also equipped with a billet aluminum factory style quick connect adapter that seals with an o-ring. One 1/8" NPT port which is also provided on the tube for a sensor or water-methanol injection.

Condensation Drain:
The intercooler includes a 1/8" NPT brass breather vent for automatic draining, of condensation or any type of build up inside the intercooler. For those who wish to manually drain the build up we have also included a solid NPT plug.

Perfect Fit:
Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes high quality stainless steel clamps and heavy-duty 5-Ply couplings for strength.

aFe Badging:
A unique laser-cut aFe power logo plate is welded-onto the intercooler tube for an aggressive style.

Free Shipping
local_shipping
Ford F150 2017-2019 V6-3.5L Alpha Raptor Pro 5R Momentum XP Cold Air Intake System by aFe Power 54-73120-L
zoom_inchevron_leftchevron_right
Ford F150 2017-2019 V6-3.5L Alpha Raptor Pro 5R Momentum XP Cold Air Intake System by aFe Power AFE POWER
$1,266.10
54-73120-L
check_box_outline_blankShow Comparison

Unique One-Piece Housing:
The smooth one-piece sealed housing is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style.

3" Equal Length Intake Tubes:
Dual 3" mandrel-bent Blue powder-coated aluminum equal length intake tubes are designed with an H-pipe to balance intake tube pressure and maximizes airflow and velocity. Also included, an exclusive stainless steel riveted aFe Power badge.

Dual Inlet Large 5-Layer Performance Air Filter:
This sealed intake system utilizes pre-oiled, large 7" tall radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

Hassle-Free Installation:
All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

The Dynamic Air Scoop (D.A.S.) from aFe is a very simple snap-in product that increases airflow and velocity into the Momentum HD air intake system from the front of the vehicle. This scoop is constructed of high quality plastic for greater strength and unique styling. This scoop is a perfect upgrade to the Momentum HD cold air intake system (P/N: 50-73006; 50-73006-W & 51/54-73116).

Lower Intake Air Temperature:
Dynamic Air scoops lower intake air temperatures by forcing more cool air from the front of the vehicle into the air intake auxiliary scoop.

High Quality D.A.S Scoop:
This Dynamic Air Scoop is constructed with high quality plastic for greater strength and unique styling.

Hassle Free Installation:
All necessary hardware is included for an easy, hassle free installation. No cutting or drilling required.


ADDS UP TO:+28%FLOW INCREASE +13 HP HORSEPOWER +24 Lbs. x Ft.TORQUE MAX GAINS

Preorder
bookmark
Ford F150 2017-2019 V6-3.5L Momentum XP Alpha Raptor Pro 5R Cold Air Intake System aFe Power 54-73120-B
zoom_inchevron_leftchevron_right
Ford F150 2017-2019 V6-3.5L Momentum XP Alpha Raptor Pro 5R Cold Air Intake System aFe Power AFE POWER
$1,266.10
54-73120-B
check_box_outline_blankShow Comparison

Unique One-Piece Housing:
The smooth one-piece sealed housing is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style.

3" Equal Length Intake Tubes:
Dual 3" mandrel-bent Blue powder-coated aluminum equal length intake tubes are designed with an H-pipe to balance intake tube pressure and maximizes airflow and velocity. Also included, an exclusive stainless steel riveted aFe Power badge.

Dual Inlet Large 5-Layer Performance Air Filter:
This sealed intake system utilizes pre-oiled, large 7" tall radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

Hassle-Free Installation:
All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

The Dynamic Air Scoop (D.A.S.) from aFe is a very simple snap-in product that increases airflow and velocity into the Momentum HD air intake system from the front of the vehicle. This scoop is constructed of high quality plastic for greater strength and unique styling. This scoop is a perfect upgrade to the Momentum HD cold air intake system (P/N: 50-73006; 50-73006-W & 51/54-73116).

Lower Intake Air Temperature:
Dynamic Air scoops lower intake air temperatures by forcing more cool air from the front of the vehicle into the air intake auxiliary scoop.

High Quality D.A.S Scoop:
This Dynamic Air Scoop is constructed with high quality plastic for greater strength and unique styling.

Hassle Free Installation:
All necessary hardware is included for an easy, hassle free installation. No cutting or drilling required.


ADDS UP TO:+28%FLOW INCREASE +13 HP HORSEPOWER +24 Lbs. x Ft.TORQUE MAX GAINS

New
bookmark
Ford F150 Raptor 2017-2019 V6-3.5L Rebel XD Series 3inch 409 Stainless Steel Cat-Back Exhaust System aFe Power 49-43091-B
zoom_inchevron_leftchevron_right
Ford F150 Raptor 2017-2019 V6-3.5L Rebel XD Series 3inch 409 Stainless Steel Cat-Back Exhaust System aFe Power AFE POWER
$1,942.60
49-43091-B
check_box_outline_blankShow Comparison

aFe power introduces an all new Rebel Series dual middle-side exit exhaust system for the 2017-2018 Ford F-150 Raptor with V6-3.5L EcoBoost twin-turbo engine. This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3" MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system.

3-1/2" Dia. Black Middle-Side Exit Tips:
Finishing off the exhaust are dual 3-1/2" diameter black 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look.

Installation Is A Snap:
This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:
High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths.

Aggressive Sound:
A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Perfect Fit:
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

Fits:
CC/SB, SuperCrew/Short Bed with 5-1/2' ft. box
EC/SB, SuperCab/Short Bed with 5-1/2' ft. box

Ford F250, F350 2011-2016 Powerstroke 6.7L Cold Air Intake S and B Filters 75-5104
zoom_inchevron_leftchevron_right
Ford F250, F350 2011-2016 Powerstroke 6.7L Cold Air Intake S and B Filters S&B FILTERS
$798.60
75-5104
check_box_outline_blankShow Comparison

Our cold air intake for the 2011-2016 Ford Powerstroke 6.7L was engineered to minimize air restriction and flows 36.98% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

Completely redesigned for a huge increase in airflow and an easy installation. The larger air filter can be easily installed and removed without having to take out the intake tube.
The 75-5104 has two airflow configurations depending on your needs. Using teh included silicone box plug will seal the airbox, making the front inlet the primary source of air.
An added auxillary inlet features a foam piece to help protect your engine in the event the main inlet becomes blocked.
The intake runs through the silicone tube seal on the airbox that compensates for engine movement, while still providing an effective seal against engine heat.

Ford F250, F350 2017-2019 Powerstroke 6.7L Cold Air Intake S and B Filters 75-5085
zoom_inchevron_leftchevron_right
Ford F250, F350 2017-2019 Powerstroke 6.7L Cold Air Intake S and B Filters S&B FILTERS
$798.60
75-5085
check_box_outline_blankShow Comparison
Our cold air intake for the 2017-2018 Ford Powerstroke 6.7L was engineered to minimize air restriction and flows 55.97% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.

We swapped the location of the intake box and battery, allowing our intake to not only be closer to but also directly in line with the front air inlet. Additionally, our intake tube has minimal bends as it connects to the turbo inlet. These details result in a signifcant decrease in restriction compared to stock intake.
Ford F250-F350 2017-2019 V8-6.7L Rebel XD Series inch 409 Stainless Steel DPF-Back Exhaust System w/Dual Black Tips aFe Power 49-43102-B
zoom_inchevron_leftchevron_right
Ford F250-F350 2017-2019 V8-6.7L Rebel XD Series inch 409 Stainless Steel DPF-Back Exhaust System w/Dual Black Tips aFe Power AFE POWER
$1,621.40
49-43102-B
check_box_outline_blankShow Comparison

aFe Rebel XD Series DPF-back exhaust system performs as good as it looks. Made with 4" mandrel bent 409 stainless steel tubing to improve exhaust flow for more HP, torque and lower EGTs. The Rebel XD is MIG welded for durability and includes high quality hardware to provide a quick, hassle-free installation. Finished with dual 5" black stainless steel tips with intercooling vents make it the perfect combination of performance, value and style.

Stainless Steel Construction:
This Rebel XD Series exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum flow and durability. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's.

Dual 5" Diameter Black Intercooled Tips:
Finishing off the exhaust are dual 5" straight cut, black stainless steel tips with intercooling vents that reduce EGT's at the tailpipe and are badged with a laser-cut aFe POWER plates riveted on each tip.

OE Fit:
OE-style bayonet hangers are used to maintain a stable pipe location under any driving conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. All systems use factory mounting locations providing a hassle-free installation.

Leak-Free Seal:
High quality band clamp and hardware are included for a hassle-free installation and a complete 360 degree sealing surface.

Wheelbases:
Standard Cab / Long Bed, 8ft bed, 141.6" wheelbase
Extended Cab / Short Bed, 6.75ft bed, 148" wheelbase
Crew Cab / Short Bed, 6.75ft bed, 160" wheelbase
Extended Cab / Long Bed, 8ft bed, 164.2" wheelbase
Crew Cab / Long Bed, 8ft bed, 176" wheelbase

Preorder
bookmark
Ford F250/F350 2005-2010 V8-6.7L Full Time Operation Fuel System Boost activated AFE 42-13051
zoom_inchevron_leftchevron_right
Ford F250/F350 2005-2010 V8-6.7L Full Time Operation Fuel System Boost activated AFE AFE POWER
$1,938.20
42-13051
check_box_outline_blankShow Comparison

Clear High-Impact Polycarbonate Sight Glass:
Allows visual inspection of fuel.

Helical Bronze Spur Gears:
Bronze gears more forgiving of contaminants than steel gears. The helical spur gear design runs quieter than straight cut gears.

Billet 6061-T6 Aluminum Manifold:
Eliminates porosity concerns with cast aluminum.

"Marine Grade" Motor:
Protected against dust intrusion and powerful water jets.

Plug & Play Installation:
Supplied harness attaches directly to battery and utilizes Deutsch weather-proof connectors. No cutting or modifications of the stock fuel lines required. Vehicle can easily be returned to stock.

Relay Controlled:
The DFS780 is powered by your ignition and can be run in parallel with the stock fuel transfer pump.

PEEK Bearing Wear Surfaces:
The DFS780 spur gears ride on PEEK (Polyether Ether Ketone) bearing surfaces to reduce both noise and wear.

Contoured CNC Machining Of Manifold Passages:
Enhances flow through the manifold to reduce pressure drop due to flow restrictions.

Direct Bolt-on Steel Mounting Bracket:
Heavy duty bracket mounts to the frame and utilizes existing hole to secure.

Fuel Pressure Gauge Port:
1/8NPT port allows customer to attach an external pressure gauge to monitor fuel pressure.

O.E Quality Viton Seals:
Compatible with diesel and biodiesel fuels.

Fits:
2017 Ford Super Duty F-250/F-350 V8-6.7L (td) Power Stroke

Jeep Wrangler JK 2012-2016 3.6L Cold Air Intake S and B Filters 75-5060
zoom_inchevron_leftchevron_right
Jeep Wrangler JK 2012-2016 3.6L Cold Air Intake S and B Filters S&B FILTERS
$798.60
75-5060
check_box_outline_blankShow Comparison
Our cold air intake for the 2012-2016 Jeep Wrangler JK 3.6L was engineered to minimize air restriction and flows 46.78% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.
Preorder
bookmark
Nissan Titan 2016-2019 5.0L Cummins Diesel Cold Air Intake S and B Filters 75-5082
zoom_inchevron_leftchevron_right
Nissan Titan 2016-2019 5.0L Cummins Diesel Cold Air Intake S and B Filters S&B FILTERS
$798.60
75-5082
check_box_outline_blankShow Comparison
Our cold air intake for the 2016-2018 Nissan Titan 5.0L was engineered to minimize air restriction and flows 27.25% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. 
Preorder
bookmark
Nissan Titan XD 2016-2018 V8-5.0L  Intercooler Blade Runner GT Series with Tubes AFE 46-20282-B
zoom_inchevron_leftchevron_right
Nissan Titan XD 2016-2018 V8-5.0L Intercooler Blade Runner GT Series with Tubes AFE AFE POWER
$4,546.30
46-20282-B
check_box_outline_blankShow Comparison

This BladeRunner GT Series Intercooler kit represents the next generation of intercoolers. The BladeRunner intercoolers utilize a 3" bar and plate core design that is larger than stock. This kit outflows the OE intercooler set up for more power.

End Tanks:
The unique BladeRunner end tanks are constructed out of 3/16'' TIG-Welded aluminum plates.

3" Bar and Plate Core Design:
The use of the bar and plate core design allows for greater airflow.

Billet Aluminum Inlet/Outlets:
This BladeRunner Intercooler uses 3" inlets and outlets for superior strength and durability..

TIG-Welded:
100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.

Condensation Drain:
The intercooler includes a 1/8" NPT vent, which can be used to drain any type of build up from the intercooler.

Perfect Fit:
Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes high quality stainless steel spring loaded t-bolt clamps and heavy-duty 5-Ply couplings for strength.

Flow and Performance:
aFe Power's intercooler tube are constructed from 3" mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tube from engine heat and protects the tube from corrosion. The smooth transition bends decrease turbulence, minimize pressure loss, while increasing horsepower and torque. Also included is four 1/8" NPT port which is provided for a sensor or water-methanol injection.

aFe Badging:
A unique laser-cut aFe power logo plate is welded-onto the intercooler tubes for an aggressive style.

Free Shipping
local_shipping
Nissan Titan XD 2016-2019 V8-5.0L Large Bore-HD 4 inch Exhaust aFe Power 49-46127-B
zoom_inchevron_leftchevron_right
Nissan Titan XD 2016-2019 V8-5.0L Large Bore-HD 4 inch Exhaust aFe Power AFE POWER
$1,460.80
49-46127-B
check_box_outline_blankShow Comparison

Power, quality and sound is what this Large Bore-HD series down-pipe back exhaust system offers. 4" mandrel-bent 409 stainless steel tubing and high-flow muffler are less restrictive keeping exhaust pulses flowing smoothly for increased power gains. High-temp black powder coated stainless steel exhaust tip completes the look. Factory style hangers, quality band clamps and all necessary hardware ensure a quick install and long-lasting exhaust that looks as good as it performs.

Flow and Performance:
This Large Bore-HD exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum flow and longevity. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lower EGT's.

High Flow 409 Stainless Steel Muffler:
This 409 stainless steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration, but maintain a smooth sound at idle. Stamped with an aFe POWER logo for an aggressive style. Muffler Specifications: 4" Center Inlet /Outlet, 8" Round x 24" Length Body.

6" Diameter Black Tip:
This system is finished off with a 6" high-temp. black powder-coated slash cut tip. A unique laser-cut aFe Power logo plate is riveted on for a custom, quality finish.

OE Fit:
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.

Fits: CC/SB (151.6" Wheelbase/6.6ft. bed)

Ram  1500-2500-3500 2009-2019 Hemi V8-5.7L Cold Air Intake S and B Filters 75-5106
zoom_inchevron_leftchevron_right
Ram 1500-2500-3500 2009-2019 Hemi V8-5.7L Cold Air Intake S and B Filters S&B FILTERS
$798.60
75-5106
check_box_outline_blankShow Comparison
DOES NOT FIT ASV CONVERSIONS

Our cold air intake for the 2009-2018 Dodge RAM 5.7L HEMI was engineered to minimize air restriction with a custom enclousure that protects the filter from engine heat and dirt. This intake flows 41.28% better than stock.

This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.
Ram 1500 2009-2018 V8-5.7L Hemi 3 inch Mach Force-XP 409 Stainless Steel Cat Back Exhaust System Black aFe Power 49-42013-P
zoom_inchevron_leftchevron_right
Ram 1500 2009-2018 V8-5.7L Hemi 3 inch Mach Force-XP 409 Stainless Steel Cat Back Exhaust System Black aFe Power AFE POWER
$2,164.80
49-42013-P
check_box_outline_blankShow Comparison

aFe is proud to introduce the MACH Force XP Cat-Back exhaust system for the 2009-2017 Dodge/RAM 1500 with the V8-5.7L HEMI engine. This exhaust system outflows the factory exhaust by 130%. This cat-back exhaust is constructed of 3" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with dual gloss black 304 stainless steel, double wall slash cut tips for an aggressive style.

Installation is a Snap:
This MACH Force XP exhaust system use all factory mounting locations providing stability and a hassle-free installation.

Leak-Free Seal: 
High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths.

Aggressive Sound: 
A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Perfect Fit: 
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.


Ram 1500 2009-2018 V8-5.7L Hemi Mach Force-XP 3inch 409 Stainless Steel Cat Back Exhaust System Black aFe Power 49-42013-B
zoom_inchevron_leftchevron_right
Ram 1500 2009-2018 V8-5.7L Hemi Mach Force-XP 3inch 409 Stainless Steel Cat Back Exhaust System Black aFe Power AFE POWER
$2,388.10
49-42013-B
check_box_outline_blankShow Comparison

aFe is proud to introduce the MACH Force XP Cat-Back exhaust system for the 2009-2017 Dodge/RAM 1500 with the V8-5.7L HEMI engine. This exhaust system outflows the factory exhaust by 130%. This cat-back exhaust is constructed of 3" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with dual gloss black 304 stainless steel, double wall slash cut tips for an aggressive style.

Installation is a Snap:
This MACH Force XP exhaust system use all factory mounting locations providing stability and a hassle-free installation.

Leak-Free Seal: 
High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths.

Aggressive Sound: 
A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Perfect Fit: 
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.


Ram 1500 2009-2019 V8 5.7L Hemi Twisted Steel Long Tube Headers & Y Pipe aFe Power 48-42010-YC
zoom_inchevron_leftchevron_right
Ram 1500 2009-2019 V8 5.7L Hemi Twisted Steel Long Tube Headers & Y Pipe aFe Power AFE POWER
$3,834.60
48-42010-YC
check_box_outline_blankShow Comparison

Our Twisted Steel long tube header and y-pipe added an astounding +32 HP and +44 lbs. x ft. 

Twisted Steel Long Tube Headers Features:

  • 16-Gauge, 1-3/4" Mandrel-Bent Stainless Steel Tubing for Unrestricted Flow
  • 3/8" Thick, Laser-Cut, Head Flanges Designed to Match the Head Port for a Leak-Free Seal
  • 4-to-1 Formed Merge Collectors Eliminate Flow Blocking Turbulence
  • Optimized Tube Lengths Improve Flow and Performance
  • 100% Hand MIG Welded Construction Ensures Optimal Strength and Durability

Y-Pipe (Street Version) Features:

  • High-Flow, 400 Cell Catalytic Converters for Improved Flow
  • Mandrel-Bent 3" into 3-1/2" Stainless Steel Tubing for Better Flow and Added Power
  • True 2-to-1 Mitered Merge Collector Eliminates Dead Zones for Improved Flow
Ram 1500 2014-2019 eco Diesel Large Bore-HD 2.5 inch 409 Stainless Steel DPF Back  Polished Tip Exhaust System aFe Power 49-42041-P
zoom_inchevron_leftchevron_right
Ram 1500 2014-2019 eco Diesel Large Bore-HD 2.5 inch 409 Stainless Steel DPF Back Polished Tip Exhaust System aFe Power AFE POWER
$1,663.20
49-42041-P
check_box_outline_blankShow Comparison

Flow and Performance:
This Large Bore-HD exhaust system is 100% hand MIG-welded and constructed of 2-1/2'" mandrel-bent stainless steel tubing for maximum flow. The smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's. A mitered merge collector is also incorporated to eliminate dead space that can cause turbulence and hinder flow that formed collectors are prone to produce.

Perfect Fit:
This system uses all factory mounting locations providing stability and hassle-free installation. Includes OE-style bayonet hangers which are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.

4-1/2" Angle-Cut Rolled Edge Matte-Black Clamp-On Tips:
Finishing off the exhaust are dual 4-1/2" 304 stainless steel clamp-on tips with a matte-black finish. A unique laser-cut aFe Power logo plate is riveted on for an aggressive style.

Wheelbases:
Crew Cab/5'7" Bed (140" Wheelbases)
Crew Cab/6'4" Bed (149" Wheelbases

Ram 1500 2014-2019 Eco-Diesel  2-2.5inch Large Bore-HD 409 Stainless Steel DPF Back Black Tip Exhaust System aFe Power 49-42041-B
zoom_inchevron_leftchevron_right
Ram 1500 2014-2019 Eco-Diesel 2-2.5inch Large Bore-HD 409 Stainless Steel DPF Back Black Tip Exhaust System aFe Power AFE POWER
$1,663.20
49-42041-B
check_box_outline_blankShow Comparison

Flow and Performance:
This Large Bore-HD exhaust system is 100% hand MIG-welded and constructed of 2-1/2'" mandrel-bent stainless steel tubing for maximum flow. The smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's. A mitered merge collector is also incorporated to eliminate dead space that can cause turbulence and hinder flow that formed collectors are prone to produce.

Perfect Fit:
This system uses all factory mounting locations providing stability and hassle-free installation. Includes OE-style bayonet hangers which are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.

4-1/2" Angle-Cut Rolled Edge Matte-Black Clamp-On Tips:
Finishing off the exhaust are dual 4-1/2" 304 stainless steel clamp-on tips with a matte-black finish. A unique laser-cut aFe Power logo plate is riveted on for an aggressive style.

Wheelbases:
Crew Cab/5'7" Bed (140" Wheelbases)
Crew Cab/6'4" Bed (149" Wheelbases

Ram 1500 2014-2019 Eco-Diesel V6 Cold Air Intake S and B Filters 75-5074
zoom_inchevron_leftchevron_right
Ram 1500 2014-2019 Eco-Diesel V6 Cold Air Intake S and B Filters S&B FILTERS
$798.60
75-5074
check_box_outline_blankShow Comparison
Our cold air intake for the 2014-2017 Dodge Ram EcoDiesel was engineered to minimize air restriction and flows 22% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.


Ram 2500 2013-2018 6.7L Turbo Diesel  5 inch Large Bore-HD 409 Stainless Turbo-Back Exhaust System by aFe Power 49-42047-1B
zoom_in
Ram 2500 2013-2018 6.7L Turbo Diesel 5 inch Large Bore-HD 409 Stainless Turbo-Back Exhaust System by aFe Power AFE POWER
$1,904.10
49-42047-1B
check_box_outline_blankShow Comparison

Features:
Constructed of 5" mandrel-bent stainless steel tubing for maximum flow
Includes a 6" Dia. black stainless steel clamp-on tip with a laser-cut stainless steel aFe power plate
A free-flowing 24" long muffler is used to absorb high pitch tones producing a powerful sound
High quality OE style flanges are used for a complete 360 degree sealing surface
OE style bayonet hangers are used to maintain a stable pipe location
Uses factory mounting locations providing stability and a hassle-free installation
Fits Rear Coil and Leaf Spring Suspensions

Fits Dually and 5th Wheel Tow Package

The Large Bore-HD turbo back exhaust system is engineered to perform in the most extreme environments. This system is constructed from 5" mandrel bent stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGT's. This system is available with a free-flowing 24" long muffler and includes a 6" diameter black stainless steel clamp-on tip with a laser-cut stainless steel aFe power plate for an aggressive style.

Installation is a Snap:
This Large Bore-HD system includes extension pipes to fit cab configuration and uses factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:
High quality OE style flange and band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound:
A free-flowing 24" long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig.

OE Fit:
OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Flow and Performance:
This Large Bore-HD exhaust system is constructed of 5" mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's.

6" Black Tip:
Finishing off the exhaust is a 6" diameter black stainless steel clamp-on tip with a laser-cut stainless steel aFe power plate for an aggressive style.

Note: Fits Crew Cab Short/Long Beds & Mega Cabs (140"/140.4", 148.9"/149.3'', 168.9"/169.3, 160"/160.5" Wheel Bases) Dually and 5th Wheel Tow Package

Preorder
bookmark
Ram 2500 2013-2018 6.7L Turbo Diesel Large Bore-HD 4inch 409 Stainless Steel Turbo-Back Exhaust System aFe Power 49-42054-B
zoom_inchevron_leftchevron_right
Ram 2500 2013-2018 6.7L Turbo Diesel Large Bore-HD 4inch 409 Stainless Steel Turbo-Back Exhaust System aFe Power AFE POWER
$1,343.10
49-42054-B
check_box_outline_blankShow Comparison

Features:
Constructed of 4" mandrel-bent stainless steel tubing for maximum flow  

Includes a 6" Dia. black stainless steel clamp-on tip with a laser-cut stainless steel aFe power plate free-flowing 24" long muffler is used to absorb high pitch tones producing a powerful sound

A high quality OE style flange is used for a complete 360 degree sealing surface
OE style bayonet hangers are used to maintain a stable pipe location
Uses factory mounting locations providing stability and a hassle-free installation
Fits Rear Coil and Leaf Spring Suspensions

The Large Bore-HD turbo back exhaust system is engineered to perform in the most extreme environments. This system is constructed from 4" mandrel bent stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGT's. This system is available with a free-flowing 24" long muffler and includes a 6" diameter black stainless steel clamp-on tip with a laser-cut stainless steel aFe power plate for an aggressive style.

Installation is a Snap:
This Large Bore-HD exhaust system includes an extension pipe to fit cab configuration and uses factory mounting locations providing stability and hassle-free installation.

Leak-Free Seal:
High quality OE style flange and band clamps are used for a complete 360 degree sealing surface.

Aggressive Sound:
A free-flowing 24" long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig.

OE Fit:
OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Flow and Performance:
This Large Bore-HD exhaust system is constructed of 4" mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's.

6" Black Tip:
Finishing off the exhaust is a 6" diameter black stainless steel clamp-on tip with a laser-cut stainless steel aFe power plate for an aggressive style.

Note: This system fits Crew Cab Short Beds/Long Beds, Crew Cab Dually & Mega Cab Standard Beds (149.5", 160.5" & 169.5" Wheel Bases)

Preorder
bookmark
Ram 2500, 3500 2013-2019 (NON ASV) Cummins 6.7L Cold Air Intake S and B Filters 75-5068
zoom_inchevron_leftchevron_right
Ram 2500, 3500 2013-2019 (NON ASV) Cummins 6.7L Cold Air Intake S and B Filters S&B FILTERS
$798.60
75-5068
check_box_outline_blankShow Comparison
Our cold air intake for the 2013-2018 Dodge Ram Cummins 6.7L was engineered to minimize air restriction and flows 54.60% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. 
Preorder
bookmark
Ram Chevrolet Ford Mach Force-XP 4inch 409 Stainless Steel Intercooled Exhaust Tip 49T40501-B121
zoom_inchevron_leftchevron_right
Ram Chevrolet Ford Mach Force-XP 4inch 409 Stainless Steel Intercooled Exhaust Tip AFE POWER
$256.30
49T40501-B121
check_box_outline_blankShow Comparison

aFe Power is proud to introduce an all new intercooled exhaust tip. This tip comes with a black finish and is designed to fit 4" exhaust systems. With a 4" inlet x 5" outlet and 12" inch length, this single-walled, angle cut rolled tip comes with intercooling vents and a unique laser-cut aFe Power logo plate riveted on for an aggressive style.

Intercooled  Vents:
This tip comes with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe.

Leak-Free Seal:
A high quality stainless steel band clamp is used for a complete 360 degree sealing surface.

aFe Badging:
The exhaust tip comes with a unique laser-cut aFe Power logo plate riveted on for an aggressive style

Preorder
bookmark
Free Shipping
local_shipping
Toyota Tundra 2007-2018 5.7L Cold Air Intake S and B Filters 75-5039
zoom_inchevron_leftchevron_right
Toyota Tundra 2007-2018 5.7L Cold Air Intake S and B Filters S&B FILTERS
$798.60
75-5039
check_box_outline_blankShow Comparison
Our cold air intake for the 2007-2018 Toyota Tundra / Sequoia 5.7L was engineered to minimize air restriction and flows 51.51% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.


Preorder
bookmark
All pictures shown are for illustration purpose only. Actual product may vary due to Australian design regulations.
Let's Talk
WE ARE HERE TO ASSIST YOU, PLEASE GET IN TOUCH.
11 Rob Place, Vineyard NSW 2765
  • person
  • chat_bubble
  • email
  • phone