• Winch Cable Shackle Mount; Identity; 20000 Pound Load Capacity; 7/8 Inch Shear Pin; Anodised Red; Aluminium

• Limited Lifetime Warranty

• Winch Cable Shackle Mount; Identity; 20000 Pound Load Capacity; 7/8 Inch Shear Pin; Black ; Aluminium

• Limited Lifetime Warranty

Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.

• Made from thick 3inch  heavy duty steel tubes
• PreDrilled for Park Sensors or covers
• Park sensor extension looms supplied
• Durable Highly Polished finish
• High intensity double row LED light bar
• Includes a skid plate
• Backed by a three year Limited Warranty

Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.

• Made from thick 3inch  heavy duty steel tubes
• PreDrilled for Park Sensors or covers
• Park sensor extension looms supplied
• Durable Black Powdercoating
• High intensity double row LED light bar
• Includes a skid plate
• Backed by a three year Limited Warranty

Introducing the all-new Sentry CT by TruXedo. This hard roll-up truck bed cover comes equipped with our premium matte black woven fabric and features an Xtra-low profile look. The fabric is pressure bonded to heavy-duty black aluminium slats making Sentry CT the ultimate in strength and style.

When rolled up tightly at the cab, the cover provides full bed access without blocking rear view visibility or the third brake light. When closed, the Sentry CT's flush mount profile delivers a sleek look that is sure to impress! An extra security latch is located towards the centre of the cover for enhanced protection so you can rest in the fact that your cargo is safe and sound.

Please note This cover will only fit trucks with silver accessory rails.

AMTRUX side steps are a great improvement on STD The extra length and step pad allow easy access to the front of your tub whilst adding a dressed edge to the full length of the cab

Features:

• Highly polished Stainless Steel with Nylon tread areas
• Steel brackets and all fitting hardware
• 5inch oval bar with LARGE Full Width Stomp Pads
•  XL Cab Length to access tub
• Curved front end
• Patented Design

• BOLSTER YOUR DEFENSES - MaxSeal from Extang is designed to help keep dust, rain, and snow out of your truck bed.
  
  
• BROAD FIT - Use MaxSeal with most any style pickup and top, lid, or tonneau cover. Add more protection or replace old or damaged tailgate seals.
  
  
• SIMPLICITY RULES - Do it yourself with ease. Simply cut, peel, and stick. Each MaxSeal package comes with 10 feet.
  
  
• RELIABLE MATERIAL - MaxSeal is made with all-weather grade, UV, gas, and oil resistant EPDM industrial high-strength rubber just like OE doorjamb seals.
  
  
• MADE BY THE BEST - If anyone knows how to protect your truck bed, it's Extang. They've been leading the industry with quality truck bed covers since 1982

• Durable canvas with laminated foam backing for comfort
• Toughness: using our high quality 14.9 oz Australian made canvas and denim materials
• Waterproof: our canvas seat covers are waterproof - tested and proven against water to handle all your recreational activities without any surface deterioration
• Mould Resistant: eliminating growth of mould and bacteria
• UV Stability: to cope with Australia's toughest conditions, our materials have strong UV stability and colour fastness
• Airbag Compatible: industry approved Airbag Deployment Seam Technology

AMTRUX form fit Mud Guards are made from durable, impact resistant all-weather thermoplastic that's as tough as nails (or rocks for that matter). They're easy to install, conform perfectly to your fenders, and protect your ride and those around you from the rage of the road.

• No Drilling Required
• Our form fit Mud Guards are tailored to match your fenders perfectly. If only our pants could fit like that.
• Built to the maximum width for full tread coverage of single or dually factory tires. We don't mess around with mess around.
• Our durable, impact resistant all-weather thermoplastic material holds up to whatever the road spits at it.
• The sleek style of our Form Fit Mud Guards give your ride a factory look, only better.

Road Armor is the world's premier bumper manufacturer, dedicated to producing the ultimate in form, fit, and finish.

We were the first to create a multifaceted steel bumper design and have led the industry since 2000. There are a lot of other manufacturers on the market these days, and we encourage you to learn the difference - The Road Armor difference - because not all replacement bumpers are created equal. There's no substitute for the Original Road Armor Bumpers, 100% Made in Texas, USA and backed by our Lifetime Guarantee.

Made and Engineered By Road Armor in the USA to Meet 

AS 4876.1-2002 Motor Vehicle Protection Systems.

Front Replacement grill to suit 1500 13-23

Excludes Warlock DS

COLOUR : Chrome and Matt Black 

QUANTITES:1PCS/SET

MATERIAL:ABS 

Front Replacement grill to suit 1500 13-23

Excludes Warlock DS

COLOUR : Matt Black 

QUANTITES:1PCS/SET

MATERIAL: ABS 

10 Year Warranty!  

You Break it, Bend it, have a problem with it, We'll Repalce it!

Set of Four AMTRUX Black Pocket Style Fender Flares for all 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018  and 19-21 DS Rams.

10 Year warranty!  

You Break it, Bend it, have a problem with it, We'll Repalce it!

Set of Four AMTRUX Black Pocket Style Fender Flares for all 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018  and 19-21 DS Rams.

Introducing the all-new Sentry CT by TruXedo. This hard roll-up truck bed cover comes equipped with our premium matte black woven fabric and features an Xtra-low profile look. The fabric is pressure bonded to heavy-duty black aluminum slats making Sentry CT the ultimate in strength and style.

When rolled up tightly at the cab, the cover provides full bed access without blocking rear view visibility or the third brake light. When closed, the Sentry CT's flush mount profile delivers a sleek look that is sure to impress! An extra security latch is located towards the center of the cover for enhanced protection so you can rest in the fact that your cargo is safe and sound.

Introducing the all-new Sentry CT by TruXedo. This hard roll-up truck bed cover comes equipped with our premium matte black woven fabric and features an Xtra-low profile look. The fabric is pressure bonded to heavy-duty black aluminum slats making Sentry CT the ultimate in strength and style.

When rolled up tightly at the cab, the cover provides full bed access without blocking rear view visibility or the third brake light. When closed, the Sentry CT's flush mount profile delivers a sleek look that is sure to impress! An extra security latch is located towards the center of the cover for enhanced protection so you can rest in the fact that your cargo is safe and sound.

Front and Rear covers to protect your seats from water, mud, and anything you can throw at it with Rough Country's front and rear Neoprene Seat Covers. These easy-to install covers fit snugly over your truck's seats to protect your interior from the elements while blending in perfectly

Please Note- rear seat is 2+1 seat config.

Airflow Improvement: 40.63%

Efficiency Rating: 99.89%

MAXIMUM PERFORMANCE

Our cold air intake for the 2019-2021 Ram 2500/3500 6.7L was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.

NEW SNAP IN LID DESIGN

Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim provides a protective seal against unwanted, power-robbing engine heat and debris. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.

PREMIUM SILICONE COMPONENTS

The air filter, coupler, lid seal and box plug are all made with silicone. Silicone is a premium rubber which will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.

NO CHECK ENGINE LIGHTS

S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights. Featuring an injection Molded MAF (Mass Air Flow) plate and IAT (Intake Air Temperature) that ensures true o-ring seal to the sensor.

RAM AIR SCOOP FITMENT SEALS BETTER THAN STOCK

The factory scoop attachment uses plastic snap in features to secure the scoop to the airbox, which can result in airflow loss. The S&B scoop seal has a rubberized seal fitment that compresses into the stock scoop resulting is less airflow loss.

The Wetseat is Australia's best neoprene seat cover since 2007. Specifically manufactured to suit the Australian way of life by the sand, sea, mud and dirt, the Wetseat is an innovative protection solution designed to fit like a second skin. It is easily cleaned and provides users with a cover that repels against spills.

Key features include:

• Automotive Grade Premium Neoprene Rubber (Not Foam filled)
• Designed & Tested to over 15 Global and Australia OEM (Original Equipment Manufacturer) standards
• Tailor Made to each individual vehicle (Seats retain full functionality with covers fitted)
• 2.5mm-2.7mm Thickness material
• Highly Water Resistant
• UV Stable
• Abrasion and Chemically Resistant
• Closed cell construction delivers superior seat cushioning
• Sharkskin Embossing (Anti Slip backing)
• Cold Machine Washable (Gentle Cycle)
• Console lid covers are included with the front set

Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.

• Made from thick 3inch  heavy duty steel tubes
• PreDrilled for Park Sensors or covers
• Park sensor extension looms supplied
• Durable Highly Polished finish
• High intensity double row LED light bar
• Includes a skid plate
• Backed by a three year Limited Warranty

Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.

• Made from thick 3inch  heavy duty steel tubes
• PreDrilled for Park Sensors or covers
• Park sensor extension looms supplied
• Durable Black Powdercoating
• High intensity double row LED light bar
• Includes a skid plate
• Backed by a three year Limited Warranty

• Bumper Type: Heavy Duty
• Width: Full
• Guard Included: No
• D-Rings Mounts: Yes
• Hitch Mount Ability: No
• Available Lights: (2) 3" Cube LED Lights
• Available Winches: Up to 12,000 lbs.
• Material: 3/16" Heavy Duty Steel, 1/4" Gusseting and Internal Bracketry
• Finish: 5-Stage Satin Black Powder Coat
• Features:
• CNC Laser Cut
• Precision Brake Formed
• Welded by Crafstmen inside and out
• Direct Bolt On Design
• Superior Foot Forward Winch Mount
• Lifetime Structural Warranty
• Winch and Lights are not included
• Proudly Made in Texas, 

• 20-Current Gladiator JT
• Wrangler JL, 2 & 4 door
• Premium 5-stage satin black powder-coat finish
• 3/16 inch heavy duty steel construction
• 1/4 inch gusseting and internal bracketry
• Pre-runner guard
• CNC laser cut
• Precision brake formed
• Bolt-on application
• Superior foot forward winch mount
• Mount fits a WARN M12000, Smittybilt XRC
• Recessed light ports for auxiliary lighting
• Winch and Lights are not included
• Lifetime structural warranty
• Made in the USA

• 20-Current Gladiator JT
• Wrangler JL, 2 and 4 door
• Premium 5-stage satin black powder-coat finish
• 3/16 inch heavy duty steel construction
• 1/4 inch gusseting and internal bracketry
• CNC laser cut
• Precision brake formed
• Bolt-on application
• Superior foot forward winch mount
• Mount fits a WARN M12000 or Smittybilt XRC
• Recessed light ports for auxiliary lighting
• Winch and auxilary ights are not included
• Made in the USA
• Lifetime structural warranty

Vehicle Fitment:

• 2018-2020 JEEP JL WRANGLER & JT GLADIATOR

Product Features:

• Proudly Made in Texas, USA
• 3/16 inch Heavy Duty Steel Construction
• 1/4 inch Gusseting and Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded by Craftsmen inside and out
• Direct Bolt On Design
• License plate lights included
• Light Ports for LED Backup Lights
• Raw Unfinished Steel
• Lifetime Structural Warranty
• *Lights are not included

DETAILS:

Maintain your air filter's optimal performance with regular cleaning and oiling, which is recommended every 40-50k Ks.

• Includes a 5.5oz. Bottle of Oil and a 12oz. Bottle of POWER CLEANER
• Specifically Made for aFe POWER Pro 5R and Pro 10R Air Filters
• Simple Spray On, Rinse Off Cleaner and Easy Re-Oiling

• For Pro 5R and Pro 10R Air Filters:
  This Restore Kit was specifically developed for aFe POWER's Pro 5R and Pro 10R air filters. The POWER CLEANER effectively breaks down dirt and dust without damaging the media, while the oil captures debris during use.

  Restoring Air Filters:
  Simply apply the cleaner onto the filter element, let it soak, and rinse. Once dry, the oil can be applied. Take care to not over-oil the filter. Refer to the instruction sheet for more information.