- ACCESSORIESexpand_more
- BONNET PROTECTORSexpand_more
- BONNETSexpand_more
- BULL BARS / BUMPERSexpand_more
- CANOPIESexpand_more
- CARGOGLIDE / CARGO DRAWERSexpand_more
- EXHAUSTexpand_more
- FENDER FLARESexpand_more
- FLOOR MATS AND LINERSexpand_more
- FUEL DOORS AND TANKSexpand_more
- GRILLSexpand_more
- INTAKESexpand_more
- LIGHTINGexpand_more
- MERCHANDISEexpand_more
- MUD FLAPS AND GUARDSexpand_more
- NUDGE BARSexpand_more
- PERFORMANCEexpand_more
- SEAT COVERSexpand_more
- SIDE STEPSexpand_more
- SPORTS BAR / ROLL BARSexpand_more
- SUSPENSIONexpand_less
- Show All
- TONNEAU COVERS AND BED COVERSexpand_more
- TOWING MIRRORSexpand_more
- TUB LINERS / BED LINERSexpand_more
- WEATHERSHIELDSexpand_more
- WINCHESexpand_more
- WORKSHOPexpand_more
Give your truck an improved, aggressive look with Rough Country's 1.5in Leveling kit for Trailboss models! This easy-to-install kit levels your vehicle from front to rear giving you increased ground clearance to run larger tires while eliminating the nose-down factory look for a commanding presence that can't be ignored.
When it comes to leveling your vehicle, a small lift can make a huge difference! By lifting the front end of the vehicle to match the height of the rear, you get an instant transformation in looks and ground clearance that's sure to turn heads wherever you go. Includes a Lifetime Replacement Guarantee!
FEATURES
- Maintains factory ride quality
- Increased ground clearance
- Levels the front with the rear of the vehicle
FEATURES
- Incredible ride quality & performance
- 0-3inch lift
- Monotube design
- Internal floating piston
- Nitrogen-charged
- 46mm high-flow piston
- Fast heat dissipation
- 36kN Tensile Strength
- Mounts inverted
- T6061 brushed aluminum body
- Free Shipping
- 3-year Manufacturer's Warranty
FEATURES
- Easy bolt-on installation
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Maintains factory ride quality and re-use of factory air ride
NOTES - IMPORTANT
- Fits 4wd models only.
- Does NOT fit Rebel models.
- Will NOT be able to use Off Road Mode 1 and 2 due to new lift height.
Rough Country's 2.5in Suspension Lift features a front and rear set of durable coil spacers, shock extensions, sway bar links and bump stops. This kit is designed to simply enhance the factory components, allowing you to retain your brand new JL shocks and coils to preserve the factory ride just as Jeep engineered it! Rough Country's Jeep JL 2.5in kit features a 100% bolt-on installation process for an easy, no-fuss assembly and includes a Lifetime Replacement Warranty for the ultimate peace of mind.
FEATURES
- Easy bolt-on installation.
- Increased ground clearance.
- Clears up to 35" tires*
NOTES - IMPORTANT
- Fits gas and diesel models.
- 35" tires will clear but rubbing may occur with extreme articulation.
- If planning on running 35" tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links.
- Does NOT fit Mojave models.
This kit is for the Toyota Tundra 2008 onwards
The Load Assist tow Kit comes with:
- 2 x BOSS Airbags Extreme Series 2600 Double Bellow
- 4 x brackets (2 upper & 2 lower)
- Mounting Hardware
- Quality SAE J844 Government Approved Airline
- Dual Schrader Valves Mounted in Stainless Panel
- Instructions for fitting
Boss Extreme series airbags are rated at 2600lb or 1186kg per side and have been government approved tested to over 750psi.
All Boss airbags are manufactured by us and are branded Boss. Beware of unbranded airbags, usually coming from China from other companies.
Average dual cab ute will run around 15-45psi depending on load.
Boss has sold over 13000 load assist kits in Australia, proven over time with 4WD enthusiasts, Mining companies, Tradies, 4WD Tour Operators as well as in Agricultural Vehicles, Trailers and motorhomes, limited only to your imagination.
To get the best performance from your tow kit inflate airbags just enough to achieve a level ride height. By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unnecessary pressure on any one individual part of your vehicles suspension.
- This is a complete 2" leveling kit for the 2019 or Newer GM 1500 Truck Silverado and Sierra
- This level kit levels the front 2" to bring level to the rear
- Covered by our Limited Lifetime Warranty
- Liift leveling kit spacers and all hardware for the 2019 or Newer Chevrolet Silverado and GMC Sierra
- Detailed instruction manual walking you step-by-step through the leveling kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation
AIR SUSPENSION HELPER KIT FOR COIL SPRINGS
Product/Vehicle Details:
- Easy Fit Kit
- High Pressure Kit only due to high load capacity, excl. Power Ram & Rebel
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Steering stabilizers are designed to restrain "bump steer" and front end vibration, giving added life to tires, ball joints, and other steering components.
FEATURES
- Easy bolt-on installation.
- Improves control and handling.
- Reduces bump steer.
- Reduces tie rod and ball joint wear and tear.
- Chrome hardened 9/16-inch piston rod
- Easy bolt-on installation
- Maintains factory ride quality
- Increased ground clearance
- Levels the front with the rear of the vehicle
- No need to disassemble your struts to install
- Built from aircraft quality T6061 Billet Aluminum
The Superlift High Clearance Dual Steering Stabilizer Kit includes dual Superlift SS cylinders, plus hardware to relocate the cylinders in-line, and above the tie rod, to provide improved protection from rocks and other hazards.
Each cylinder's seamless, extruded monotube body contains a patented piston design, and a high-pressure gas charge to quickly dissipate heat and virtually eliminate fade. Cylinder valving is tailored to meet the demands of heavier tires/wheels and aggressive terrain.
Cylinders feature a brushed, silver Zinc finish, and include a black dust boot. Note that Superide shock boots will not fit Superlift SS cylinders.
A steering stabilizer is basically a shock absorber for your steering system. It allows unrestricted gradual movement but resists sudden shock. Stabilizers also combat other forces that induce tire shimmy, such as larger/heavier tires and wheels and slack in your suspension and steering systems that occur from normal wear.
Most vehicles are factory equipped with a stabilizer, yet like most factory shock absorbers, they are barely adequate and have a limited service life. Look for signs of oil leakage where the shaft meets the cylinder body.
- Integrated skid plate design
- Increased ground clearance
- Levels the front with the rear of the vehicle
- HD 0.25-inch thick steel crossmembers.
- No exhaust modifications required
- Easy bolt-on installation
- Maintains factory ride quality
- Increased ground clearance
- Levels the front with the rear of the vehicle
- No need to disassemble your struts to install
- Built from aircraft quality T6061 Billet Aluminum
- Easy bolt-on installation
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Forged torsion bar adjuster keys
