Extreme Level
Our exhaust suits all variants, including the factory-backed ASV RHD conversions, and the SCD conversion which retains the original steering column position. We've also confirmed fitment on the new supercharged behemoth that is the TRX!
The Manta Exhaust for the DT RAM 1500 features the following:
Featuring a set of 1 3/4in primary 4-into-1 headers, with 3in outlets (available with ceramic coating)
Full twin 3in system with H-pipe, and hotdog + muffler centre
Tailpipes with 5in chrome tips (available with black tips also)
Awesome V8 sound
Our full system routes the exhaust away from the transmission, behind the crossmember, thus eliminating the issue of the exhaust contributing to the transmission temperature. Our catback system goes off the back of the factory Y-pipe, so therefore does not alter this area at all.
Performance Level
Our exhaust suits all variants, including the factory-backed ASV RHD conversions, and the SCD conversion which retains the original steering column position. We've also confirmed fitment on the new supercharged behemoth that is the TRX!
The Manta Exhaust for the DT RAM 1500 features the following:
Featuring a set of 1 3/4in primary 4-into-1 headers, with 3in outlets (available with ceramic coating)
Full twin 3in system with H-pipe, and hotdog + muffler centre
Tailpipes with 5in chrome tips (available with black tips also)
Awesome V8 sound
Our full system routes the exhaust away from the transmission, behind the crossmember, thus eliminating the issue of the exhaust contributing to the transmission temperature. Our catback system goes off the back of the factory Y-pipe, so therefore does not alter this area at all.
Performance Level
Our exhaust suits all variants, including the factory-backed ASV RHD conversions, and the SCD conversion which retains the original steering column position. We've also confirmed fitment on the new supercharged behemoth that is the TRX!
The Manta Exhaust for the DT RAM 1500 features the following:
Featuring a set of 1 3/4in primary 4-into-1 headers, with 3in outlets (available with ceramic coating)
Full twin 3in system with H-pipe, and hotdog + muffler centre
Tailpipes with 5in chrome tips (available with black tips also)
Awesome V8 sound
Our full system routes the exhaust away from the transmission, behind the crossmember, thus eliminating the issue of the exhaust contributing to the transmission temperature. Our catback system goes off the back of the factory Y-pipe, so therefore does not alter this area at all.
Designed to take advantage of the factory suspension geometry without overextending operating angles, these 3" system offer next level performance without the need to overhaul the suspension to correct the geometry like on the 4"+ kits. At the heart of these 3" systems are a pair of precision tuned FOX 2.5 performance elite series coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless aluminum body for better heat dispersion, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. A pair of reservoir mounting brackets are supplied to position the reservoirs. Complimenting the coilovers are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims.
For the rear of these 3" systems the stance is leveled out with a pair of 1.5" dual rate coil springs designed for exceptional ride quality and additional load capacity over stock. Your choice of rear FOX 2.0 Performance Series IFP gas shocks or upgrade FOX 2.5 Performance Elite Series DSC reservoir shocks are offered to match the front for next level performance and easy tuning to meet the demands out on the trail. As with all BDS kits these come ready to install right out the box with all hardware packs and step-by-step installation instructions.
Improve the look and capability of your RAM 1500 truck with this 3" Coilover System from BDS Suspension.
Tire & Wheel Combinations
*Trimming may be required*
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
Take your RAM 1500 to the next level with the 6" Coilover Systems from BDS Suspension. Based around the tried and true high clearance technology that has made BDS the go to for RAM suspension lifts, these systems have been designed from the ground up to get more out of your RAM. Avaialble with standard reservoir or DSC adjustment reservoir coilovers, these systems offer smooth on-road comfort while providing impressive off-road performance and capability with clearance for 35-37" tires.
At the heart of these systems are a pair of precision tuned FOX 2.5 factory race series remote reservoir coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with the remote reservoirs available with the optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. Complimenting the coilovers are a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. Two knuckles options are available to fit trucks equipped with the standard hub bore as well as the larger hub bore used on truck with factory 22" wheels.The front differential is repositioned with BDS's multipoint relocation bracket system to secure the front differential and keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. Rounding out the front of this kit are a pair of stainless steel braided extended brake line and sway bar relocation brackets.
In the rear of this 6" lift system the factory coil springs are replaced with 5" ProRide coil springs to level the stance. With the additional ride height the rear suspension geometry is corrected with control arm relocation brackets, a bolt-on rear track bar relocation bracket to recenter the axle, extended length sway bar links to correct operating angle, and bump stop extensions to properly limit up travel. For the rear of these systems a pair of FOX 2.0 IFP performance series gas shocks are utilized to offer improved damper performance in rough terrain and a smooth ride on the highway. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions.
Tire & Wheel Combinations
*Trimming may be required*
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
Through a collaborative effort between BDS Suspension and Fox Racing, BDS now offers this 4-6" Dodge 1500 4WD suspension system featuring Fox 2.5" coil-over remote reservoir shocks. This system has been rigorously tested to maximize travel and performance on and off the pavement.
This lift kit is based around two one-piece, 1/4" laser cut high-clearance crossmembers and replacement steering knuckles. The high-clearance crossmembers increase ground clearance for off road performance and on road appeal.
The replacement steering knuckles make for a clean installation as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.
The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines.
Nothing complements this BDS Suspension better than the race proven design of Fox 2.5" remote reservoir coil-over front shocks. These have been specifically engineered to fit the BDS Suspension system and feature an external reservoir for increased oil cooling capacity and nitrogen volume for a more consistent and comfortable ride. These have also been pre-set by BDS to 6" of lift for an easy installation, but can be adjusted down to 4" or fined tuned anywhere in between to your liking.
BDS allows you to customize your desired stance by offering 2" rear coil spacers or 3" and 5" Pro-Ride coils that are capable of being smashed totally flat and will come back to normal ride height. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets, and sway bar links.
BDS by Fox 2.0 series rear gas shocks come standard to match the front 2.5" Fox Coil-over
Tire & Wheel Combinations
*Trimming may be required*
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
This 4" lift kit will clear up to 35" tires and is based around two one-piece, 1/4" laser cut high-clearance crossmembers and replacement steering knuckles. The high-clearance crossmembers increase ground clearance for off road performance.
The replacement steering knuckles reduce installation time as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.
The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines.
The rear is lifted via BDS 2" coil spacers to level most trucks. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets and sway bar links. A 3" rear coil spring option is available depending on your desired stance.
Check out more options and build your own kit by clicking on customize this kit.
Tire & Wheel Combinations
*Trimming may be required*
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
AMTRUX side steps are a great addition to your Trail Boss or other models without factory side steps. The large step pads allow easy access to all doors and the front of your tub whilst adding a dressed edge to the full length of the cab
Features:
Rough Country's 3.5in Bolt-on kit offers easy installation and aggressive good looks at an incredible value. Take your truck to new heights with this excellent option for RAM 1500 pickups.
This kit features a set of high-quality, forged aluminum upper control arms designed to make alignment adjustments easier and Clevite rubber bushings for enhanced durability. These arms are designed to promote a factory-like geometry by keeping the ball joint at optimum angles after lifting. This design allows for an improved, greater range of motion from the ball-joint, with less stress, wear and tear.
Rough Country's 3.5" Bolt-on Kit features a set of durable front and rear spacers to provide additional ground clearance. Once installed, this kit gives your truck plenty of ride height for up to 295/60R20 tires while offering a clean, level look from front to rear. This kit also features Rough Country's Nitrogen-charged N3 Shocks for a fantastic blend of off-road action and smooth highway ride quality!
This all-inclusive kit comes with everything you need, and installation is a piece of cake compared to other kits on the market! Featuring a 100% bolt-on installation process that requires zero cutting or drilling, this kit can be installed using common tools in a home garage, and allows the truck to be returned to stock at any time if so desired. Best of all this kit features Rough Country's Lifetime Replacement Warranty.
Keep your front-end looking showroom new with the AVS Bugflector an innovative high-profile hood shield with a wrap-around design. The AVS Bugflector is constructed using proprietary, impact resistant ABS material, and it offers maximum coverage area to stop rocks from dinging your hood and to keep insects off your windshield. Car wash safe with an easy non-drill installation, the AVS Bugflector means minimal downtime without sacrificing protection for your vehicle.
The PowertraxONE MX electric retractable truck bed cover is part our Polycarbonate Series covers. The rigid polycarbonate construction provides superior impact resistance and ultimate UV protection allowing the cover to perform in temperatures from -50 to +200F. The PowertraxONE MX truck bed cover combines durable polycarbonate construction with an incredibly resilient matte finish. The PowertraxONE MX offers all the same great features and benefits of the RetraxONE MX but also offers the enhanced feature of electric operation. Using a wireless key fob this retractable truck bed cover opens and closes easily with the touch of a button. The PowertraxONE MX also features an integrated LED cargo light on the canister that is operated by the key fob and includes a safety auto shutoff feature. An electromagnetic brake allows the cover to lock in any position along the rail allowing you to have unlimited hauling capacity. The PowertraxONE MX truck bed cover offers you ultimate cargo protection with the luxury of hands free operation.
Introducing the all-new Sentry CT by TruXedo. This hard roll-up truck bed cover comes equipped with our premium matte black woven fabric and features an Xtra-low profile look. The fabric is pressure bonded to heavy-duty black aluminium slats making Sentry CT the ultimate in strength and style.
When rolled up tightly at the cab, the cover provides full bed access without blocking rear view visibility or the third brake light. When closed, the Sentry CT's flush mount profile delivers a sleek look that is sure to impress! An extra security latch is located towards the centre of the cover for enhanced protection so you can rest in the fact that your cargo is safe and sound.
Please note This cover will only fit trucks with silver accessory rails.