- ACCESSORIESexpand_more
- BONNET PROTECTORSexpand_more
- BONNETSexpand_more
- BULL BARS / BUMPERSexpand_more
- CANOPIESexpand_more
- CARGOGLIDE / CARGO DRAWERSexpand_more
- EXHAUSTexpand_more
- FENDER FLARESexpand_more
- FLOOR MATS AND LINERSexpand_more
- FUEL DOORS AND TANKSexpand_more
- GRILLSexpand_more
- INTAKESexpand_more
- LIGHTINGexpand_more
- MERCHANDISEexpand_more
- MUD FLAPS AND GUARDSexpand_more
- NUDGE BARSexpand_more
- PERFORMANCEexpand_more
- SEAT COVERSexpand_more
- SIDE STEPSexpand_more
- SPORTS BAR / ROLL BARSexpand_more
- SUSPENSIONexpand_more
- TONNEAU COVERS AND BED COVERSexpand_more
- TOWING MIRRORSexpand_more
- TUB LINERS / BED LINERSexpand_more
- WEATHERSHIELDSexpand_more
- WINCHESexpand_more
- WORKSHOPexpand_more
- Anti-skid TPO composite surface
- Three Quarter inch thick padded floor gives you impact protection & is easy on the knees
- Integrated tailgate gap guard hinge keeps dirt & dust out of your truck bed
- Designed for exterior use - will not absorb water
- Chemical, & stain resistant
The BedRug Impact Mat is designed specifically for trucks that have an existing spray-in liner or no bed liner. The all new design has an integrated tailgate gap guard hinge that connects the bed piece to the tailgate piece. The TPO composite top layer construction offers a flat work surface, that is slip and skid resistant. The three quarter inch padded under layer provide dent and impact resistance while offering cushion for your knees while crawling around in your truck bed. The Impact Mat installs in minutes using hook and loop fasteners to install without the need to prep, sand or drill holes into your truck bed.
The Impact Mat is made to fit your specific make and model, filling in the ribs and contours of the truck bed to provide a smooth, void free loading surface. The integrated tailgate hinge covers the gap between your truck bed and the tailgate, this will eliminate the annoying build-up of debris between the two pieces. This mat will protect your truck while standing up to whatever you can throw at it: from mulch to bleach. The Impact Mat's TPO material is fade and UV resistant. The three quarter inch thick foam is similar to that used in life jackets and will not absorb water, resisting mold and mildew. Water will simply run off the surface, through the zippered perimeter, out the factory drain holes in the truck bed and will dry in as little as 20 minutes.
- Stylish Matte Black Finish
- Ultra Low-Profile Design
- Carpeted Underpanels Provide a Finished OEM Look
- Integrated Luminous Bed Rail Light
- Dual Action Tailgate Seal for Easy Operation
- Weather Resistant
- Automatic Latching Panels
- Made in the USA
- 5-Year Warranty
A hard folding truck bed cover that comes with overwhelming new features, and is topped off with an alluring matte finish. The Ultra Flex is in a category of its own. From the irresistible outward appearance, to each component beneath the cover, the Ultra Flex has been carefully crafted to be the ultimate all-purpose truck bed cover.
All-new features that accompany the Ultra Flex include an integrated luminous rail light system for enhanced night vision, and a dual action tailgate seal, allowing for easy operation and you to close the tailgate with the cover up or down. Multiple riding positions allow the user to ride with full access to their bed, and full weather protection is available if the cover is in the fully closed position. Ultra Flex is a no-drill application and can be installed and removed easily with our newly designed L-Rail's. What's more, the Ultra Flex is backed by a 5-year warranty, making it the most desirable folding cover on the market.
- Stylish Matte Black Finish
- Ultra Low-Profile Design
- Carpeted Underpanels Provide a Finished OEM Look
- Integrated Luminous Bed Rail Light
- Dual Action Tailgate Seal for Easy Operation
- Weather Resistant
- Automatic Latching Panels
- Made in the USA
- 5-Year Warranty
A hard folding truck bed cover that comes with overwhelming new features, and is topped off with an alluring matte finish. The Ultra Flex is in a category of its own. From the irresistible outward appearance, to each component beneath the cover, the Ultra Flex has been carefully crafted to be the ultimate all-purpose truck bed cover.
All-new features that accompany the Ultra Flex include an integrated luminous rail light system for enhanced night vision, and a dual action tailgate seal, allowing for easy operation and you to close the tailgate with the cover up or down. Multiple riding positions allow the user to ride with full access to their bed, and full weather protection is available if the cover is in the fully closed position. Ultra Flex is a no-drill application and can be installed and removed easily with our newly designed L-Rail's. What's more, the Ultra Flex is backed by a 5-year warranty, making it the most desirable folding cover on the market.
You have equipped your vehicle with oversize wheels and tires for serious off-road traction and clearance. Now you need extra tire coverage to protect your vehicles body and maybe even comply with local laws. Bushwacker Extend-A-Fender Flares deliver premium-grade protection and style matched to oversized tires, yet as tough as they are, they go on easily with no drilling required. You can install them in minutes and enjoy them for years. Our exclusive Dura-Flex 2000 material is designed for added durability and flexibility with built-in UV protection. Your Extend-A-Fender Flares resist chalking, cracking, and warping, whether you leave them with their OEM-style matte black finish or paint them for a totally personalized look. Either way, your truck will look factory-equipped for your off-road tires. Extend-A-Fender Flares go on easy, perform tough, and look great.
America's #1 selling hard folding cover, the BAKFlip MX4, has new features, including matte-finished cab corner caps, rail-end caps, clamps, and elevator bolts for a more streamlined look and feel. Other MX4 features include an enhanced functionality with pre-molded, die-cut, shock-absorbent bumpers and secure prop rod clips.
EXPECT MORE with BAKFlip MX4:
- Premium matte finish
- Durable aluminum panels
- Rated up to 400 lbs. of evenly distributed weight
- 5-year warranty
- Dual-action tailgate seal
- NEW finished corner caps featuring a softer seal for a more finished appearance
- NEW pre-molded and die-cut A-panel and B-side bumpers
- NEW secure rail end caps
- NEW prop rod clips securely designed for durability
- NEW matte-finished elevator bolts and clamps
WHY UPGRADE?
This heavy-duty, all-season truck bed cover is designed to perform in extreme conditions. MX4's resilient infrastructure is for everyday use, featuring NEW upgrades to the prop rod clips, rails, elevator bolts, and the A-panel and B-side bumpers that provide enhanced functionality and a more complete matte-finish look and feel. The MX4's solid and robust design is flush mount, and backed by an extended 5-year warranty.
The X4 Hard Rolling Truck Bed Tonneau Cover by BAK Flip, is a premium hard rolling cover with the great features of a stylish matte black finish. When closed, heavy-duty aluminum slats secure the cover the full length of the bed on both sides, providing unrivaled strength and security. When opened, the cover rolls up tight providing full bed access without blocking rear view mirror and third brake light visibility.
WHY UPGRADE?
Constructed of heavy-duty aluminium panels. When latched, the Patented Rotational Locking Rails secure the cover the entire length of the truck bed. Heavy-duty locking levers are now 3X thicker with reinforced gussets for added strength and are engineered to lock with no adjustment necessary.
Premium matte finish hard rolling cover
Patented rotational locking rails lock 100% of the cover for unrivaled security
Automatic latching system
Bilstein B8 5100 Series Shocks
Standard Height
Bilstein B8 5100 Series shocks feature a monotube design for cooler, more efficient operation and longer life. They have the largest available piston diameter, providing superior handling and performance. The shocks' patented digressive valving instantly reacts to changing surface conditions for maximum comfort and control-on and off the road. These shocks also have split compression and rebound valving tuned for each specific application. Order the model designed for your year/make/model.
Additional features:
* 2 in. seamless extruded tube
* 14mm centerless-ground, case-hardened, chromed, and super-polished rod
* 46mm Bilstein digressive piston
* Self-adjusting, deflective-disc independent rebound and compression
Bilstein B8 5100 Series Shocks
Fits Standard height to 2 Inch Lift
Bilstein B8 5100 Series shocks feature a monotube design for cooler, more efficient operation and longer life. They have the largest available piston diameter, providing superior handling and performance. The shocks' patented digressive valving instantly reacts to changing surface conditions for maximum comfort and control-on and off the road. These shocks also have split compression and rebound valving tuned for each specific application. Order the model designed for your year/make/model.
Additional features:
* 2 in. seamless extruded tube
* 14mm centerless-ground, case-hardened, chromed, and super-polished rod
* 46mm Bilstein digressive piston
* Self-adjusting, deflective-disc independent rebound and compression
America's #1 selling hard folding cover, the BAKFlip MX4, has new features, including matte-finished cab corner caps, rail-end caps, clamps, and elevator bolts for a more streamlined look and feel. Other MX4 features include an enhanced functionality with pre-moulded, die-cut, shock-absorbent bumpers and secure prop rod clips.
EXPECT MORE with BAKFlip MX4:
- Premium matte finish
- Durable aluminium panels
- Rated up to 400 lbs. of evenly distributed weight
- Dual-action tailgate seal
- NEW finished corner caps featuring a softer seal for a more finished appearance
- NEW pre-moulded and die-cut A-panel and B-side bumpers
- NEW secure rail end caps
- NEW prop rod clips securely designed for durability
- NEW matte-finished elevator bolts and clamps
WHY UPGRADE?
This heavy-duty, all-season truck bed cover is designed to perform in extreme conditions. MX4's resilient infrastructure is for everyday use, featuring NEW upgrades to the prop rod clips, rails, elevator bolts, and the A-panel and B-side bumpers that provide enhanced functionality and a more complete matte-finish look and feel. The MX4's solid and robust design is flush mount.
Fits with silver rails
Benefits
- Works with installation kit provided with the BedRug or BedTred liner.
- Includes (14) 1" x 2" hook-and-loop fasteners
- Provides an adhesive promoter
- Does not damage your existing spray-in liner
*Please note 3-4 weeks delivery period*
BDS Suspension raises the bar for 2019+ RAM 1500 with new 3" coilover systems.
Designed to take advantage of the factory suspension geometry without overextending operating angles, these 3" system offer next level performance without the need to overhaul the suspension to correct the geometry like on the 4"+ kits. At the heart of these 3" systems are a pair of precision tuned FOX 2.5 performance elite series coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless aluminum body for better heat dispersion, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. A pair of reservoir mounting brackets are supplied to position the reservoirs. Complimenting the coilovers are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims.
For the rear of these 3" systems the stance is leveled out with a pair of 1.5" dual rate coil springs designed for exceptional ride quality and additional load capacity over stock. Your choice of rear FOX 2.0 Performance Series IFP gas shocks or upgrade FOX 2.5 Performance Elite Series DSC reservoir shocks are offered to match the front for next level performance and easy tuning to meet the demands out on the trail. As with all BDS kits these come ready to install right out the box with all hardware packs and step-by-step installation instructions.
Improve the look and capability of your RAM 1500 truck with this 3" Coilover System from BDS Suspension.
Tire & Wheel Combinations
- 33x12.50 w/20x9 and 4.5-5" back spacing
- 33x12.50 w/18x9 and 4.5-5" back spacing
*Trimming may be required*
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
- Made from thick 3inch heavy duty steel tubes
- PreDrilled for Park Sensors or covers
- Park sensor extension looms supplied
- Durable Black Powdercoating
- High intensity double row LED light bar
- Includes a skid plate
- Backed by a three year Limited Warranty
*Please note 3-4 weeks delivery period*
Dodge Ram 1500 / Rebel 4WD Trucks without Air Ride
Take your RAM 1500 to the next level with the 6" Coilover Systems from BDS Suspension. Based around the tried and true high clearance technology that has made BDS the go to for RAM suspension lifts, these systems have been designed from the ground up to get more out of your RAM. Avaialble with standard reservoir or DSC adjustment reservoir coilovers, these systems offer smooth on-road comfort while providing impressive off-road performance and capability with clearance for 35-37" tires.
At the heart of these systems are a pair of precision tuned FOX 2.5 factory race series remote reservoir coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with the remote reservoirs available with the optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. Complimenting the coilovers are a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. Two knuckles options are available to fit trucks equipped with the standard hub bore as well as the larger hub bore used on truck with factory 22" wheels.The front differential is repositioned with BDS's multipoint relocation bracket system to secure the front differential and keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. Rounding out the front of this kit are a pair of stainless steel braided extended brake line and sway bar relocation brackets.
In the rear of this 6" lift system the factory coil springs are replaced with 5" ProRide coil springs to level the stance. With the additional ride height the rear suspension geometry is corrected with control arm relocation brackets, a bolt-on rear track bar relocation bracket to recenter the axle, extended length sway bar links to correct operating angle, and bump stop extensions to properly limit up travel. For the rear of these systems a pair of FOX 2.0 IFP performance series gas shocks are utilized to offer improved damper performance in rough terrain and a smooth ride on the highway. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions.
Tire & Wheel Combinations
- 37" x 12.50" w/18x9 and 4.5-5" back spacing
- 37" x 12.50" w/20x9 and 4.5-5" back spacing
*Trimming may be required*
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
- Made from thick 3inch heavy duty steel tubes
- PreDrilled for Park Sensors or covers
- Park sensor extension looms supplied
- Durable Highly Polished finish
- High intensity double row LED light bar
- Includes a skid plate
- Backed by a three year Limited Warranty
*Please note 3-4 weeks delivery period*
BDS Suspension 6" Coil-Over Suspension System for Dodge Ram 1500 4WD Gas 1/2 Ton Pickup.
Through a collaborative effort between BDS Suspension and Fox Racing, BDS now offers this 4-6" Dodge 1500 4WD suspension system featuring Fox 2.5" coil-over remote reservoir shocks. This system has been rigorously tested to maximize travel and performance on and off the pavement.
This lift kit is based around two one-piece, 1/4" laser cut high-clearance crossmembers and replacement steering knuckles. The high-clearance crossmembers increase ground clearance for off road performance and on road appeal.
The replacement steering knuckles make for a clean installation as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.
The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines.
Nothing complements this BDS Suspension better than the race proven design of Fox 2.5" remote reservoir coil-over front shocks. These have been specifically engineered to fit the BDS Suspension system and feature an external reservoir for increased oil cooling capacity and nitrogen volume for a more consistent and comfortable ride. These have also been pre-set by BDS to 6" of lift for an easy installation, but can be adjusted down to 4" or fined tuned anywhere in between to your liking.
BDS allows you to customize your desired stance by offering 2" rear coil spacers or 3" and 5" Pro-Ride coils that are capable of being smashed totally flat and will come back to normal ride height. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets, and sway bar links.
BDS by Fox 2.0 series rear gas shocks come standard to match the front 2.5" Fox Coil-over
Tire & Wheel Combinations
- 37" x 12.50" w/17 x 9 and 4-1/2" back spacing
- 37" x 12.50" w/18 or 20 x 9 and 5" back spacing
*Trimming may be required*
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
- Made from thick 3inch heavy duty steel tubes
- PreDrilled for Park Sensors or covers
- Park sensor extension looms supplied
- Durable Black Powdercoating
- High intensity double row LED light bar
- Includes a skid plate
- Backed by a three year Limited Warranty
*Please note 3-4 weeks delivery period*
BDS Suspension 4" Suspension Lift Kit for Dodge Ram 1500 4WD Gas 1/2 Ton Pickup.
This 4" lift kit will clear up to 35" tires and is based around two one-piece, 1/4" laser cut high-clearance crossmembers and replacement steering knuckles. The high-clearance crossmembers increase ground clearance for off road performance.
The replacement steering knuckles reduce installation time as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.
The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines.
The rear is lifted via BDS 2" coil spacers to level most trucks. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets and sway bar links. A 3" rear coil spring option is available depending on your desired stance.
Check out more options and build your own kit by clicking on customize this kit.
Tire & Wheel Combinations
- 35" x 12.50" w/17 x 9 and 4-1/2" back spacing
- 35" x 12.50" w/18 or 20 x 9 and 5" back spacing
*Trimming may be required*
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
- Made from thick 3inch heavy duty steel tubes
- PreDrilled for Park Sensors or covers
- Park sensor extension looms supplied
- Durable Highly Polished finish
- High intensity double row LED light bar
- Includes a skid plate
- Backed by a three year Limited Warranty
*Please note 3-4 weeks delivery period*
BDS offers improved performance in a new smaller lift height with 3" UCA Lift Systems for the Chevy and GMC 2500HD/3500HD trucks. Designed for simple bolt-on installation, these kits allow clerance for up to 35" tires.
At the heart of this new system is a pair of heavy duty tubular upper control arms (UCAs) designed for improved strength and suspension travel. These new control arms are built from thick wall 1.5" DOM tubing, and use an indexed ball joint cup to reposition the upper ball joints to allow more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Along with the control arms, a pair of indexed cast steel torsion bar keys are supplied up front to lift vehicle. A small differential relocation kit is supplied to correct CV axle operating angles without effecting ground clearance. To eliminate sway bar interference, a pair of sway bar relocation brackets is used which maintains proper operating angle. In the rear a 2" block and u-bolt kit is used to create a level to slightly tail high stance when unloaded. Rounding out these kits are a pair of specially tuned FOX 2.0 performance series IFP shocks ready to soak up the terrrain. Take your HD to the next level with BDS Suspension.
Tire & Wheel Combinations
- 35x12.50 w/20x9 and 5.5-5.75" back spacing
- 295/60 w/20x9 and 5-5.75" back spacing
- 285/65 w/20x9 and 5-6.18" back spacing
*Please note 3-4 weeks delivery period*
These new lift systems are deigned to build off the factory mounting points to offer maximum ground clearance and improve suspension travel with clearance for up to 35" tires.
BDS ups the ante with new 3" UCA Lift Systems for the Chevy and GMC 2500HD/3500HD trucks. Built for easy bolt-on installation, these new 3" UCA Lift Systems offer next level performance designed around the OE suspension geometry and utilize the new FOX 2.5 Performance Elite Series shocks at each corner. These large aluminum-bodied shocks feature DSC (Dual Speed Compression) adjustable reservoirs for additional damping capacity, better heat dispersion and tuneable ride. These are paired with heavy duty BDS tubular upper control arms (UCAs) designed for improved strength and increased suspension travel. These new control arms are built from thick wall 1.5" DOM tubing, and use an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Along with the control arms, a pair of reindexed cast steel torsion bar keys are supplied up front to lift vehicle while maintaining ground clearance. A small differential relocation kit is supplied to correct CV axle operating angles without effecting ground clearance. To eliminate sway bar interference, a pair of sway bar relocation brackets is used which maintains proper operating angle. In the rear a 2" block and u-bolt kit is used to create a level to slightly tail high stance. This system utilizes next level damper performance for smooth on-road comfort and extreme off-road capability allowing you to push your truck harder. Take your HD to the next level with BDS and FOX.
Tire & Wheel Combinations
- 35x12.50 w/20x9 and 5.5-5.75" back spacing
- 295/60 w/20x9 and 5-5.75" back spacing
- 285/65 w/20x9 and 5-6.18" back spacing
*Trimming may be required*
Husky Truck Bed Mats protect your cargo from scratches and minimizes it from shifting around in transit.
- No hassle lifetime guarantee. For details: HuskyLiners.com/ForLife
- Made in the USA.
- Available in two surface options, UltraFiber and UltraGrip. Both create a flat, ultra-tough, impact resistant surface that protects your cargo and truck to boot.
- The Anti-skid surface keeps everything in place.
- GapGuard keeps your smaller cargo from getting lodged between your bed and tailgate.
- Doesn't absorb water and will not mold or mildew. Clean it with a hose, power washer or vacuum-good as new.
- Our Truck Bed Mat turns your truck bed into a soft, flat surface making it a joy to work out of, a breeze to load cargo and clean up is a snap.
- No hassles, no guff. If you have a problem, we'll replace it. Capeesh? For details: HuskyLiners.com/ForLife
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
- Made from thick 3inch heavy duty steel tubes
- PreDrilled for Park Sensors or covers
- Park sensor extension looms supplied
- Durable Highly Polished finish
- High intensity double row LED light bar
- Includes a skid plate
- Backed by a three year Limited Warranty
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
- Made from thick 3inch heavy duty steel tubes
- PreDrilled for Park Sensors or covers
- Park sensor extension looms supplied
- Durable black finish
- High intensity double row LED light bar
- Includes a skid plate
- Backed by a three year Limited Warranty
The all-new Pro X15 includes many of the same great features as our #1 selling cover, the Lo Pro, but with added style and performance. New 15 degree rails deliver an Xtra-low profile, flush-mount look on the truck bed, and superior-grade woven fabric provides a stylish matte-black appearance.
The cover can be installed or removed in minutes, with no drilling required, and the unique self-leveling design feature allows for a more accurate installation. The Pro X15 is made in the USA and comes backed with a Lifetime Warranty. Still, have questions?
- Xtra Low Profile - X15 rails provide a distinctive flush mount look, and include a unique self-leveling design feature allowing for a faster, more accurate installation.
- Matte Black Fabric - Extremely durable, superior-grade woven fabric provides a stylish matte-black appearance. Inherent dirt resistant characteristics of the fabric help it stay cleaner for longer.
- Automatic Tension Control - Patented design allows the cover to maintain a tight fit and great looks in extreme temperatures and all weather conditions. Pro X15 mounts near the tailgate for easy access.
- Quick-Release System - The entire cover can be removed in seconds, without tools, providing true, 100% full bed access.
- Easy Operation - The anodized trigger latch requires only one finger to open the cover. Roll the cover closed with ease to securely store and secure your cargo.
Fab Fours CHEVY/GMC HD rear replacement bumper integrates the existing receiver hitch. In addition to added style and formed-steel durability, the vehicle gains lower steps and recovery points. Designed to be the ultimate in functionally-stylish rear-end protection.
Features:
- Integrated Steps on either side of the Tailgate
- Durable formed Steel Construction
- Retain OEM Receiver Hitch and Wiring Locations
- 3/4'' D-Ring Recovery Points
- All sensor testing is done on lifted trucks.
- Sensor sensitivity, OE sensor housing, orientation, and operating conditions are all variables that will influence functionality of the sensors.
- Fab Fours' Bumper comes with an Armour coating.
