- ACCESSORIESexpand_more
- BONNET PROTECTORSexpand_more
- BONNETSexpand_more
- BULL BARS / BUMPERSexpand_more
- CANOPIESexpand_more
- CARGOGLIDE / CARGO DRAWERSexpand_more
- EXHAUSTexpand_more
- FENDER FLARESexpand_more
- FLOOR MATS AND LINERSexpand_more
- FUEL DOORS AND TANKSexpand_more
- GRILLSexpand_more
- INTAKESexpand_more
- LIGHTINGexpand_more
- MERCHANDISEexpand_more
- MUD FLAPS AND GUARDSexpand_more
- NUDGE BARSexpand_more
- PERFORMANCEexpand_more
- SEAT COVERSexpand_more
- SIDE STEPSexpand_more
- SPORTS BAR / ROLL BARSexpand_more
- SUSPENSIONexpand_more
- TONNEAU COVERS AND BED COVERSexpand_more
- TOWING MIRRORSexpand_more
- TUB LINERS / BED LINERSexpand_more
- WEATHERSHIELDSexpand_more
- WINCHESexpand_more
- WORKSHOPexpand_more
- 4500 lumens (combined)
- 50 watts (combined)
- Each light contains 5, 5 watt High Intensity CREE LEDs
- IP67 Waterproof rating
- Unique X-pattern design
- More LEDs per square-inch than any other light bar
- Moisture Breather technology reduces moisture build-up behind the lends
- Includes wiring harness with on/off switch
- Durable die cast aluminum housing
- Bolt Diameter: 8mm
- 3 year warranty
The unique X-pattern design provides an additional half-row of Cree LED's over standard dual-row bars, offering a big, bold look with unparalleled off-road illumination. With more LED's per square-inch than any other light cubes, Rough Country's X5 LED lights ensure you'll always see the trail ahead.
These all-weather lights feature an IP67 water-resistant, die-cast aluminum housing and include a premium flat-wound, braided wiring harness with toggle switch and in-line fuse along with a pre-assembled low-profile mounting bracket! Includes Rough Country's 3-year Warranty.
The S70 Series has been designed for the best of both worlds, maximum intensity and long range beam penetration - perfect for the serious off road enthusiast, professional off road racer or if you just want the best of the best.
Delivering the best performance mix of high intensity light and long range beam penetration, the S70 Series delivers up to 27,500lm of light intensity and a staggering 1118m of beam penetration @ 1 lux from a 52" bar by utilising Roadvision's Thermal Management and Projector Beam Technology.
Beam Type: Projector Combo 8 Driving / 32 Spot
Maximum Lumens: 11000lm
Maximum Beam Distance: 1608M
Maximum Watts: 176W
Light Source: 40x3 Watt Osram LED's
Current Draw Amps: 7.7~16.8A @ 13.8V
Dimensions: 561x67x70mm
Wiring: 2 Pin ATP Plug
AMTRUX side steps are a great improvement on STD The extra length and step pad allow easy access to the front of your tub whilst adding a dressed edge to the full length of the cab
Features:
- Highly polished Stainless Steel with Nylon tread areas
- Steel brackets and all fitting hardware
- 5inch oval bar with LARGE Full Width Stomp Pads
- XL Cab Length to access tub
- Curved front end
- Patented Design
Controlling Comfort and Steering
If your vehicle is suffering from early tire wear, handling issues, or loud noises under the chassis, you could be dealing with worn OE control arm bushings. Designed to attach the steering knuckle and wheel assembly to the vehicle, your control arms are a crucial part of your steering system. The bushings themselves absorb impacts from the road, smoothing and quieting your ride.
Moog crafts each of their bushings to either meet or exceed OE specifications. While the OE bushings might sag or rot away, Moog's control arm bushings are there for the long haul. Moog backs this up by covering all of their control arm bushings with a lifetime warranty handled in-house here at DST.
- Adhesive backed for easy peel & stick installation
- Measures: Silverado: 14.57"x 0.83" / LTZ: 3.93"x0.86"
- Package Including: 1X Silverado + 1x LTZ Emblem
- Made with high quality plastic material
- Waterproof and windproof.Please do the surface cleaning before fixing
- OEM Perfect Fit:
The tailgate letters fit 2019-2023 Chevrolet Silverado. Sitting in the recessed area of the tailgate perfectly and make your truck POP! - 100% Genuine 3M Certified Adhesive:
Premium tailgate emblems with high-quality 3M tape on the back, which can resist long-term exposure to sunlight, rain or other severe weather. Are these car wash safe? Yes, make sure to clean the recesses before installation and they won't come off! - Easy to Install:
Only take 2-3 minutes to install the tailgate Decals Letters on your truck. It is better to warm up the paste position and 3m adhesive with a heat gun before applying them to your vehicle. - Fantastic 3D Lettering:
3D raised solid badge lettering is made of high-quality ABS with nice depth and bevel to create a cool 3D.
Power, quality and sound is what this Large Bore-HD series down-pipe back exhaust system offers. 4" mandrel-bent 409 stainless steel tubing and high-flow muffler are less restrictive keeping exhaust pulses flowing smoothly for increased power gains. High-temp black powder coated stainless steel exhaust tip completes the look. Factory style hangers, quality band clamps and all necessary hardware ensure a quick install and long-lasting exhaust that looks as good as it performs.
Flow and Performance:
This Large Bore-HD exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum flow and longevity. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lower EGT's.
High Flow 409 Stainless Steel Muffler:
This 409 stainless steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration, but maintain a smooth sound at idle. Stamped with an aFe POWER logo for an aggressive style. Muffler Specifications: 4" Center Inlet /Outlet, 8" Round x 24" Length Body.
6" Diameter Black Tip:
This system is finished off with a 6" high-temp. black powder-coated slash cut tip. A unique laser-cut aFe Power logo plate is riveted on for a custom, quality finish.
OE Fit:
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.
Fits: CC/SB (151.6" Wheelbase/6.6ft. bed)
Road Armor is the world's premier bumper manufacturer, dedicated to producing the ultimate in form, fit, and finish.
We were the first to create a multifaceted steel bumper design and have led the industry since 2000. There are a lot of other manufacturers on the market these days, and we encourage you to learn the difference - The Road Armor difference - because not all replacement bumpers are created equal. There's no substitute for the Original Road Armor Bumpers, 100% Made in Texas, USA and backed by our Lifetime Guarantee.
Made and Engineered By Road Armor in the USA to Meet
AS 4876.1-2002 Motor Vehicle Protection Systems.
- OEM Perfect Fit:
The tailgate letters fit 2019-2023 Chevrolet Silverado. Sitting in the recessed area of the tailgate perfectly and make your truck POP! - 100% Genuine 3M Certified Adhesive:
Premium tailgate emblems with high-quality 3M tape on the back, which can resist long-term exposure to sunlight, rain or other severe weather. Are these car wash safe? Yes, make sure to clean the recesses before installation and they won't come off! - Easy to Install:
Only take 2-3 minutes to install the tailgate Decals Letters on your truck. It is better to warm up the paste position and 3m adhesive with a heat gun before applying them to your vehicle. - Fantastic 3D Lettering:
3D raised solid badge lettering is made of high-quality ABS with nice depth and bevel to create a cool 3D.
Benefits
- Works with installation kit provided with the BedRug or BedTred liner.
- Includes (14) 1" x 2" hook-and-loop fasteners
- Provides an adhesive promoter
- Does not damage your existing spray-in liner
*Please note 3-4 weeks delivery period*
BDS Suspension raises the bar for 2019+ RAM 1500 with new 3" coilover systems.
Designed to take advantage of the factory suspension geometry without overextending operating angles, these 3" system offer next level performance without the need to overhaul the suspension to correct the geometry like on the 4"+ kits. At the heart of these 3" systems are a pair of precision tuned FOX 2.5 performance elite series coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless aluminum body for better heat dispersion, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. A pair of reservoir mounting brackets are supplied to position the reservoirs. Complimenting the coilovers are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims.
For the rear of these 3" systems the stance is leveled out with a pair of 1.5" dual rate coil springs designed for exceptional ride quality and additional load capacity over stock. Your choice of rear FOX 2.0 Performance Series IFP gas shocks or upgrade FOX 2.5 Performance Elite Series DSC reservoir shocks are offered to match the front for next level performance and easy tuning to meet the demands out on the trail. As with all BDS kits these come ready to install right out the box with all hardware packs and step-by-step installation instructions.
Improve the look and capability of your RAM 1500 truck with this 3" Coilover System from BDS Suspension.
Tire & Wheel Combinations
- 33x12.50 w/20x9 and 4.5-5" back spacing
- 33x12.50 w/18x9 and 4.5-5" back spacing
*Trimming may be required*
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
- Made from thick 3inch heavy duty steel tubes
- PreDrilled for Park Sensors or covers
- Park sensor extension looms supplied
- Durable Black Powdercoating
- High intensity double row LED light bar
- Includes a skid plate
- Backed by a three year Limited Warranty
*Please note 3-4 weeks delivery period*
Dodge Ram 1500 / Rebel 4WD Trucks without Air Ride
Take your RAM 1500 to the next level with the 6" Coilover Systems from BDS Suspension. Based around the tried and true high clearance technology that has made BDS the go to for RAM suspension lifts, these systems have been designed from the ground up to get more out of your RAM. Avaialble with standard reservoir or DSC adjustment reservoir coilovers, these systems offer smooth on-road comfort while providing impressive off-road performance and capability with clearance for 35-37" tires.
At the heart of these systems are a pair of precision tuned FOX 2.5 factory race series remote reservoir coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with the remote reservoirs available with the optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. Complimenting the coilovers are a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. Two knuckles options are available to fit trucks equipped with the standard hub bore as well as the larger hub bore used on truck with factory 22" wheels.The front differential is repositioned with BDS's multipoint relocation bracket system to secure the front differential and keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. Rounding out the front of this kit are a pair of stainless steel braided extended brake line and sway bar relocation brackets.
In the rear of this 6" lift system the factory coil springs are replaced with 5" ProRide coil springs to level the stance. With the additional ride height the rear suspension geometry is corrected with control arm relocation brackets, a bolt-on rear track bar relocation bracket to recenter the axle, extended length sway bar links to correct operating angle, and bump stop extensions to properly limit up travel. For the rear of these systems a pair of FOX 2.0 IFP performance series gas shocks are utilized to offer improved damper performance in rough terrain and a smooth ride on the highway. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions.
Tire & Wheel Combinations
- 37" x 12.50" w/18x9 and 4.5-5" back spacing
- 37" x 12.50" w/20x9 and 4.5-5" back spacing
*Trimming may be required*
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
- Made from thick 3inch heavy duty steel tubes
- PreDrilled for Park Sensors or covers
- Park sensor extension looms supplied
- Durable Highly Polished finish
- High intensity double row LED light bar
- Includes a skid plate
- Backed by a three year Limited Warranty
*Please note 3-4 weeks delivery period*
BDS Suspension 6" Coil-Over Suspension System for Dodge Ram 1500 4WD Gas 1/2 Ton Pickup.
Through a collaborative effort between BDS Suspension and Fox Racing, BDS now offers this 4-6" Dodge 1500 4WD suspension system featuring Fox 2.5" coil-over remote reservoir shocks. This system has been rigorously tested to maximize travel and performance on and off the pavement.
This lift kit is based around two one-piece, 1/4" laser cut high-clearance crossmembers and replacement steering knuckles. The high-clearance crossmembers increase ground clearance for off road performance and on road appeal.
The replacement steering knuckles make for a clean installation as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.
The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines.
Nothing complements this BDS Suspension better than the race proven design of Fox 2.5" remote reservoir coil-over front shocks. These have been specifically engineered to fit the BDS Suspension system and feature an external reservoir for increased oil cooling capacity and nitrogen volume for a more consistent and comfortable ride. These have also been pre-set by BDS to 6" of lift for an easy installation, but can be adjusted down to 4" or fined tuned anywhere in between to your liking.
BDS allows you to customize your desired stance by offering 2" rear coil spacers or 3" and 5" Pro-Ride coils that are capable of being smashed totally flat and will come back to normal ride height. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets, and sway bar links.
BDS by Fox 2.0 series rear gas shocks come standard to match the front 2.5" Fox Coil-over
Tire & Wheel Combinations
- 37" x 12.50" w/17 x 9 and 4-1/2" back spacing
- 37" x 12.50" w/18 or 20 x 9 and 5" back spacing
*Trimming may be required*
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
- Made from thick 3inch heavy duty steel tubes
- PreDrilled for Park Sensors or covers
- Park sensor extension looms supplied
- Durable Black Powdercoating
- High intensity double row LED light bar
- Includes a skid plate
- Backed by a three year Limited Warranty
*Please note 3-4 weeks delivery period*
BDS Suspension 4" Suspension Lift Kit for Dodge Ram 1500 4WD Gas 1/2 Ton Pickup.
This 4" lift kit will clear up to 35" tires and is based around two one-piece, 1/4" laser cut high-clearance crossmembers and replacement steering knuckles. The high-clearance crossmembers increase ground clearance for off road performance.
The replacement steering knuckles reduce installation time as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.
The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines.
The rear is lifted via BDS 2" coil spacers to level most trucks. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets and sway bar links. A 3" rear coil spring option is available depending on your desired stance.
Check out more options and build your own kit by clicking on customize this kit.
Tire & Wheel Combinations
- 35" x 12.50" w/17 x 9 and 4-1/2" back spacing
- 35" x 12.50" w/18 or 20 x 9 and 5" back spacing
*Trimming may be required*
Create a tough, heavy duty look on your truck's front end while providing bumper and grille protection and improved night visibility.
- Made from thick 3inch heavy duty steel tubes
- PreDrilled for Park Sensors or covers
- Park sensor extension looms supplied
- Durable Highly Polished finish
- High intensity double row LED light bar
- Includes a skid plate
- Backed by a three year Limited Warranty
*Please note 3-4 weeks delivery period*
BDS offers improved performance in a new smaller lift height with 3" UCA Lift Systems for the Chevy and GMC 2500HD/3500HD trucks. Designed for simple bolt-on installation, these kits allow clerance for up to 35" tires.
At the heart of this new system is a pair of heavy duty tubular upper control arms (UCAs) designed for improved strength and suspension travel. These new control arms are built from thick wall 1.5" DOM tubing, and use an indexed ball joint cup to reposition the upper ball joints to allow more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Along with the control arms, a pair of indexed cast steel torsion bar keys are supplied up front to lift vehicle. A small differential relocation kit is supplied to correct CV axle operating angles without effecting ground clearance. To eliminate sway bar interference, a pair of sway bar relocation brackets is used which maintains proper operating angle. In the rear a 2" block and u-bolt kit is used to create a level to slightly tail high stance when unloaded. Rounding out these kits are a pair of specially tuned FOX 2.0 performance series IFP shocks ready to soak up the terrrain. Take your HD to the next level with BDS Suspension.
Tire & Wheel Combinations
- 35x12.50 w/20x9 and 5.5-5.75" back spacing
- 295/60 w/20x9 and 5-5.75" back spacing
- 285/65 w/20x9 and 5-6.18" back spacing
*Please note 3-4 weeks delivery period*
These new lift systems are deigned to build off the factory mounting points to offer maximum ground clearance and improve suspension travel with clearance for up to 35" tires.
BDS ups the ante with new 3" UCA Lift Systems for the Chevy and GMC 2500HD/3500HD trucks. Built for easy bolt-on installation, these new 3" UCA Lift Systems offer next level performance designed around the OE suspension geometry and utilize the new FOX 2.5 Performance Elite Series shocks at each corner. These large aluminum-bodied shocks feature DSC (Dual Speed Compression) adjustable reservoirs for additional damping capacity, better heat dispersion and tuneable ride. These are paired with heavy duty BDS tubular upper control arms (UCAs) designed for improved strength and increased suspension travel. These new control arms are built from thick wall 1.5" DOM tubing, and use an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. Along with the control arms, a pair of reindexed cast steel torsion bar keys are supplied up front to lift vehicle while maintaining ground clearance. A small differential relocation kit is supplied to correct CV axle operating angles without effecting ground clearance. To eliminate sway bar interference, a pair of sway bar relocation brackets is used which maintains proper operating angle. In the rear a 2" block and u-bolt kit is used to create a level to slightly tail high stance. This system utilizes next level damper performance for smooth on-road comfort and extreme off-road capability allowing you to push your truck harder. Take your HD to the next level with BDS and FOX.
Tire & Wheel Combinations
- 35x12.50 w/20x9 and 5.5-5.75" back spacing
- 295/60 w/20x9 and 5-5.75" back spacing
- 285/65 w/20x9 and 5-6.18" back spacing
*Trimming may be required*
Rough Country's 2.5in Suspension Lift features a front and rear set of durable coil spacers, shock extensions, sway bar links and bump stops. This kit is designed to simply enhance the factory components, allowing you to retain your brand new JL shocks and coils to preserve the factory ride just as Jeep engineered it! Rough Country's Jeep JL 2.5in kit features a 100% bolt-on installation process for an easy, no-fuss assembly and includes a Lifetime Replacement Warranty for the ultimate peace of mind.
FEATURES
- Easy bolt-on installation.
- Increased ground clearance.
- Clears up to 35" tires*
NOTES - IMPORTANT
- Fits gas and diesel models.
- 35" tires will clear but rubbing may occur with extreme articulation.
- If planning on running 35" tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links.
- Does NOT fit Mojave models.
The Impact Mat is made to fit your specific make and model, filling in the ribs and contours of the truck bed to provide a smooth, void free loading surface. The integrated tailgate hinge covers the gap between your truck bed and the tailgate, this will eliminate the annoying build-up of debris between the two pieces. This mat will protect your truck while standing up to whatever you can throw at it: from mulch to bleach. The Impact Mat's TPO material is fade and UV resistant. The thick foam is similar to that used in life jackets and will not absorb water, resisting mold and mildew. Water will simply run off the surface, through the zippered perimeter, out the factory drain holes in the truck bed and will dry in as little as 20 minutes.
Molded to fit your specific make and model, this liner looks great and fits like a glove. It creates a void-free surface without damaging your truck and allows easy access to factory tie-downs and accessories. Its non-skid surface keeps your cargo in place, and a built-in hinge between the truck bed and tailgate prevents debris from collecting. The BedRug material is fade and UV resistant. Made of foam similar to that used in life jackets, it doesn't absorb water and will not mold or mildew. Water will simply run off the surface, through the zippered perimeter, out the factory drain holes in the truck bed and will dry in as little as 20 minutes. Just clean it with a hose, power washer or vacuum and your BedRug is good as new.
