- ACCESSORIESexpand_more
- BONNET PROTECTORSexpand_more
- BONNETSexpand_more
- BULL BARS / BUMPERSexpand_more
- CANOPIESexpand_more
- CARGOGLIDE / CARGO DRAWERSexpand_more
- EXHAUSTexpand_more
- FENDER FLARESexpand_more
- FLOOR MATS AND LINERSexpand_more
- FUEL DOORS AND TANKSexpand_more
- GRILLSexpand_more
- INTAKESexpand_more
- LIGHTINGexpand_more
- MERCHANDISEexpand_more
- MUD FLAPS AND GUARDSexpand_more
- NUDGE BARSexpand_more
- PERFORMANCEexpand_more
- SEAT COVERSexpand_more
- SIDE STEPSexpand_more
- SPORTS BAR / ROLL BARSexpand_more
- SUSPENSIONexpand_more
- TONNEAU COVERS AND BED COVERSexpand_more
- TOWING MIRRORSexpand_more
- TUB LINERS / BED LINERSexpand_more
- WEATHERSHIELDSexpand_more
- WINCHESexpand_more
- WORKSHOPexpand_more
Molded to fit your specific make and model, this liner looks great and fits like a glove. It creates a void-free surface without damaging your truck and allows easy access to factory tie-downs and accessories. Its non-skid surface keeps your cargo in place, and a built-in hinge between the truck bed and tailgate prevents debris from collecting. The BedRug material is fade and UV resistant. Made of foam similar to that used in life jackets, it doesn't absorb water and will not mold or mildew. Water will simply run off the surface, through the zippered perimeter, out the factory drain holes in the truck bed and will dry in as little as 20 minutes. Just clean it with a hose, power washer or vacuum and your BedRug is good as new.
Molded to fit your specific make and model, this liner looks great and fits like a glove. It creates a void-free surface without damaging your truck and allows easy access to factory tie-downs and accessories. Its non-skid surface keeps your cargo in place, and a built-in hinge between the truck bed and tailgate prevents debris from collecting. The BedRug material is fade and UV resistant. Made of foam similar to that used in life jackets, it doesn't absorb water and will not mold or mildew. Water will simply run off the surface, through the zippered perimeter, out the factory drain holes in the truck bed and will dry in as little as 20 minutes. Just clean it with a hose, power washer or vacuum and your BedRug is good as ne
The Wetseat is Australia's best neoprene seat cover since 2007. Specifically manufactured to suit the Australian way of life by the sand, sea, mud and dirt, the Wetseat is an innovative protection solution designed to fit like a second skin. It is easily cleaned and provides users with a cover that repels against spills.
Key features include:
- Automotive Grade Premium Neoprene Rubber (Not Foam filled)
- Designed & Tested to over 15 Global and Australia OEM (Original Equipment Manufacturer) standards
- Tailor Made to each individual vehicle (Seats retain full functionality with covers fitted)
- 2.5mm-2.7mm Thickness material
- Highly Water Resistant
- UV Stable
- Abrasion and Chemically Resistant
- Closed cell construction delivers superior seat cushioning
- Sharkskin Embossing (Anti Slip backing)
- Cold Machine Washable (Gentle Cycle)
- Console lid covers are included with the front set
The all-new Pro X15 includes many of the same great features as our #1 selling cover, the Lo Pro, but with added style and performance. New 15 degree rails deliver an Xtra-low profile, flush-mount look on the truck bed, and superior-grade woven fabric provides a stylish matte-black appearance.
The cover can be installed or removed in minutes, with no drilling required, and the unique self-leveling design feature allows for a more accurate installation. The Pro X15 is backed with a Lifetime Warranty.
FEATURES
- Xtra Low Profile - X15 rails provide a distinctive flush mount look, and include a unique self-leveling design feature allowing for a faster, more accurate installation.
- Matte Black Fabric - Extremely durable, superior-grade woven fabric provides a stylish matte-black appearance. Inherent dirt resistant characteristics of the fabric help it stay cleaner for longer.
- Automatic Tension Control - Patented design allows the cover to maintain a tight fit and great looks in extreme temperatures and all weather conditions.
- Quick-Release System - The entire cover can be removed in seconds, without tools, providing true, 100% full bed access.
- Easy Operation - The anodized trigger latch requires only one finger to open the cover. Roll the cover closed with ease to securely store and secure your cargo.
Our Twisted Steel long tube header and y-pipe added an astounding +32 HP and +44 lbs. x ft.
Twisted Steel Long Tube Headers Features:
- 16-Gauge, 1-3/4" Mandrel-Bent Stainless Steel Tubing for Unrestricted Flow
- 3/8" Thick, Laser-Cut, Head Flanges Designed to Match the Head Port for a Leak-Free Seal
- 4-to-1 Formed Merge Collectors Eliminate Flow Blocking Turbulence
- Optimized Tube Lengths Improve Flow and Performance
- 100% Hand MIG Welded Construction Ensures Optimal Strength and Durability
Y-Pipe (Street Version) Features:
- High-Flow, 400 Cell Catalytic Converters for Improved Flow
- Mandrel-Bent 3" into 3-1/2" Stainless Steel Tubing for Better Flow and Added Power
- True 2-to-1 Mitered Merge Collector Eliminates Dead Zones for Improved Flow
In recent testing, the Street Version produced +33 HP and +30 lbs. x ft. TQ on our in-house dyno (tested on a 2014 Toyota Tundra V8-5.7L).
Headers:
- 1-3/4" Primary Tubing Leads into a 3" Collector
- 4-to-1 Formed Merge Collectors Eliminate Flow-Block Turbulences
- Retains Factory Air Injection
- Optimized Tube Lengths Improve Flow and Performance
- 100% MIG Welded for Strength and Durability
Connection Pipes:
- Includes Dual, High-Flow, 400 CPSI Stainless Steel Catalytic Converters
- 3" Diameter Mandrel-Bent Stainless Steel Tubing
- Utilizes OE Mounting Locations
- Anti-skid TPO composite surface
- Three Quarter inch thick padded floor gives you impact protection & is easy on the knees
- Integrated tailgate gap guard hinge keeps dirt & dust out of your truck bed
- Designed for exterior use - will not absorb water
- Chemical, & stain resistant
The BedRug Impact Mat is designed specifically for trucks that have an existing spray-in liner or no bed liner. The all new design has an integrated tailgate gap guard hinge that connects the bed piece to the tailgate piece. The TPO composite top layer construction offers a flat work surface, that is slip and skid resistant. The three quarter inch padded under layer provide dent and impact resistance while offering cushion for your knees while crawling around in your truck bed. The Impact Mat installs in minutes using hook and loop fasteners to install without the need to prep, sand or drill holes into your truck bed.
The Impact Mat is made to fit your specific make and model, filling in the ribs and contours of the truck bed to provide a smooth, void free loading surface. The integrated tailgate hinge covers the gap between your truck bed and the tailgate, this will eliminate the annoying build-up of debris between the two pieces. This mat will protect your truck while standing up to whatever you can throw at it: from mulch to bleach. The Impact Mat's TPO material is fade and UV resistant. The three quarter inch thick foam is similar to that used in life jackets and will not absorb water, resisting mold and mildew. Water will simply run off the surface, through the zippered perimeter, out the factory drain holes in the truck bed and will dry in as little as 20 minutes.
Designed with the latest optical technology and high performance 10W Cree LED's, the Rollar Series are one of the furthest projecting light bars available,
penetrating almost 1200m. Featuring a sleek black alloy housing, with dual brackets providing an infinite number of mounting options. With unbreakable
polycarbonate lenses and an extremely tough die cast aluminium housing, these lamps can handle anything that you and the environment throw at them.
| Boxed Dimension | 69x16x16 cm |
|---|---|
| Radio | EMI/EMC radio interference approved |
| Housing | Die Cast Aluminium |
| Wiring | 2 Pin Deutsch Plug |
| Beam Distance | 815m |
| Total Watts | 120W |
| Light Source | 12x10 Watt Cree LED's |
| Warranty | 5 Years |
| Mounting | Supplied with slide & end mounts |
| Brand | Roadvision |
| Weight | 4kg |
| Dimensions | 543x90x65mm |
| Voltage | Multi-volt 10-30V DC input |
| Lens | Polycarbonate Convex Lens |
| LED Lifespan | 50,000+ Hours |
| Current Draw Amps | 7.1A @ 13.8V |
| Bar Length | 20" |
| Rated | Water & dust proof IP67 rated |
| Beam type | Combination Beam |
- Easy bolt-on installation
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Forged torsion bar adjuster keys
MORE AIRFLOW.
MAXIMUM PERFORMANCE
Our cold air intake for the 2020 Silverado 6.2L was engineered to minimize air restriction and flows 51.69% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.
A MONSTER SIZED AIR FILTER
Featuring a massive, highly efficient air filter that snaps into the airbox easily and securely, providing an airtight seal. With our new snap in filter design, you can install and inspect your filter in seconds. Available in either 8-layer Cotton Cleanable or Dry Extendable media.
NEW SNAP IN LID DESIGN
Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim ensures an airtight seal, protecting against unwanted, power-robbing engine heat.
MAF HARNESS EXTENSION
The Mass Airflow Sensor is relocated further down the S&B intake tube allowing for further airflow improvements. We got you covered with our included MAF extension harness.
PREMIUM SILICONE COMPONENTS
The air filter, coupler, lid seal and plug seal are all made with silicone. Silicone is a premium rubber which will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.
THE SOUND
OF PERFORMANCE.
Check out the sound of the intake when installed in the truck. A huge air filter and air box results in a more aggressive sound compared to stock.
- Easy bolt-on installation
- Maintains factory ride quality
- Increased ground clearance
- Levels the front with the rear of the vehicle
- No need to disassemble your struts to install
- Built from aircraft quality T6061 Billet Aluminum
- Easy bolt-on installation
- Maintains factory ride quality
- Increased ground clearance
- Levels the front with the rear of the vehicle
- No need to disassemble your struts to install
- Built from aircraft quality T6061 Billet Aluminum
- Integrated skid plate design
- Increased ground clearance
- Levels the front with the rear of the vehicle
- HD 0.25-inch thick steel crossmembers.
- No exhaust modifications required
- 4500 lumens (combined)
- 50 watts (combined)
- Each light contains 5, 5 watt High Intensity CREE LEDs
- IP67 Waterproof rating
- Unique X-pattern design
- More LEDs per square-inch than any other light bar
- Moisture Breather technology reduces moisture build-up behind the lends
- Includes wiring harness with on/off switch
- Durable die cast aluminum housing
- Bolt Diameter: 8mm
- 3 year warranty
The unique X-pattern design provides an additional half-row of Cree LED's over standard dual-row bars, offering a big, bold look with unparalleled off-road illumination. With more LED's per square-inch than any other light cubes, Rough Country's X5 LED lights ensure you'll always see the trail ahead.
These all-weather lights feature an IP67 water-resistant, die-cast aluminum housing and include a premium flat-wound, braided wiring harness with toggle switch and in-line fuse along with a pre-assembled low-profile mounting bracket! Includes Rough Country's 3-year Warranty.
The S70 Series has been designed for the best of both worlds, maximum intensity and long range beam penetration - perfect for the serious off road enthusiast, professional off road racer or if you just want the best of the best.
Delivering the best performance mix of high intensity light and long range beam penetration, the S70 Series delivers up to 27,500lm of light intensity and a staggering 1118m of beam penetration @ 1 lux from a 52" bar by utilising Roadvision's Thermal Management and Projector Beam Technology.
Beam Type: Projector Combo 8 Driving / 32 Spot
Maximum Lumens: 11000lm
Maximum Beam Distance: 1608M
Maximum Watts: 176W
Light Source: 40x3 Watt Osram LED's
Current Draw Amps: 7.7~16.8A @ 13.8V
Dimensions: 561x67x70mm
Wiring: 2 Pin ATP Plug
AMTRUX side steps are a great improvement on STD The extra length and step pad allow easy access to the front of your tub whilst adding a dressed edge to the full length of the cab
Features:
- Highly polished Stainless Steel with Nylon tread areas
- Steel brackets and all fitting hardware
- 5inch oval bar with LARGE Full Width Stomp Pads
- XL Cab Length to access tub
- Curved front end
- Patented Design
Controlling Comfort and Steering
If your vehicle is suffering from early tire wear, handling issues, or loud noises under the chassis, you could be dealing with worn OE control arm bushings. Designed to attach the steering knuckle and wheel assembly to the vehicle, your control arms are a crucial part of your steering system. The bushings themselves absorb impacts from the road, smoothing and quieting your ride.
Moog crafts each of their bushings to either meet or exceed OE specifications. While the OE bushings might sag or rot away, Moog's control arm bushings are there for the long haul. Moog backs this up by covering all of their control arm bushings with a lifetime warranty handled in-house here at DST.
- Adhesive backed for easy peel & stick installation
- Measures: Silverado: 14.57"x 0.83" / LTZ: 3.93"x0.86"
- Package Including: 1X Silverado + 1x LTZ Emblem
- Made with high quality plastic material
- Waterproof and windproof.Please do the surface cleaning before fixing
- OEM Perfect Fit:
The tailgate letters fit 2019-2023 Chevrolet Silverado. Sitting in the recessed area of the tailgate perfectly and make your truck POP! - 100% Genuine 3M Certified Adhesive:
Premium tailgate emblems with high-quality 3M tape on the back, which can resist long-term exposure to sunlight, rain or other severe weather. Are these car wash safe? Yes, make sure to clean the recesses before installation and they won't come off! - Easy to Install:
Only take 2-3 minutes to install the tailgate Decals Letters on your truck. It is better to warm up the paste position and 3m adhesive with a heat gun before applying them to your vehicle. - Fantastic 3D Lettering:
3D raised solid badge lettering is made of high-quality ABS with nice depth and bevel to create a cool 3D.
Power, quality and sound is what this Large Bore-HD series down-pipe back exhaust system offers. 4" mandrel-bent 409 stainless steel tubing and high-flow muffler are less restrictive keeping exhaust pulses flowing smoothly for increased power gains. High-temp black powder coated stainless steel exhaust tip completes the look. Factory style hangers, quality band clamps and all necessary hardware ensure a quick install and long-lasting exhaust that looks as good as it performs.
Flow and Performance:
This Large Bore-HD exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum flow and longevity. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lower EGT's.
High Flow 409 Stainless Steel Muffler:
This 409 stainless steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration, but maintain a smooth sound at idle. Stamped with an aFe POWER logo for an aggressive style. Muffler Specifications: 4" Center Inlet /Outlet, 8" Round x 24" Length Body.
6" Diameter Black Tip:
This system is finished off with a 6" high-temp. black powder-coated slash cut tip. A unique laser-cut aFe Power logo plate is riveted on for a custom, quality finish.
OE Fit:
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.
Fits: CC/SB (151.6" Wheelbase/6.6ft. bed)
Road Armor is the world's premier bumper manufacturer, dedicated to producing the ultimate in form, fit, and finish.
We were the first to create a multifaceted steel bumper design and have led the industry since 2000. There are a lot of other manufacturers on the market these days, and we encourage you to learn the difference - The Road Armor difference - because not all replacement bumpers are created equal. There's no substitute for the Original Road Armor Bumpers, 100% Made in Texas, USA and backed by our Lifetime Guarantee.
Made and Engineered By Road Armor in the USA to Meet
AS 4876.1-2002 Motor Vehicle Protection Systems.
- OEM Perfect Fit:
The tailgate letters fit 2019-2023 Chevrolet Silverado. Sitting in the recessed area of the tailgate perfectly and make your truck POP! - 100% Genuine 3M Certified Adhesive:
Premium tailgate emblems with high-quality 3M tape on the back, which can resist long-term exposure to sunlight, rain or other severe weather. Are these car wash safe? Yes, make sure to clean the recesses before installation and they won't come off! - Easy to Install:
Only take 2-3 minutes to install the tailgate Decals Letters on your truck. It is better to warm up the paste position and 3m adhesive with a heat gun before applying them to your vehicle. - Fantastic 3D Lettering:
3D raised solid badge lettering is made of high-quality ABS with nice depth and bevel to create a cool 3D.
Benefits
- Works with installation kit provided with the BedRug or BedTred liner.
- Includes (14) 1" x 2" hook-and-loop fasteners
- Provides an adhesive promoter
- Does not damage your existing spray-in liner
