- ACCESSORIESexpand_more
- BONNET PROTECTORSexpand_more
- BONNETSexpand_more
- BULL BARS / BUMPERSexpand_more
- CANOPIESexpand_more
- CARGOGLIDE / CARGO DRAWERSexpand_more
- EXHAUSTexpand_more
- FENDER FLARESexpand_more
- FLOOR MATS AND LINERSexpand_more
- FUEL DOORS AND TANKSexpand_more
- GRILLSexpand_more
- INTAKESexpand_more
- LIGHTINGexpand_more
- MERCHANDISEexpand_more
- MUD FLAPS AND GUARDSexpand_more
- NUDGE BARSexpand_more
- PERFORMANCEexpand_more
- SEAT COVERSexpand_more
- SIDE STEPSexpand_more
- SPORTS BAR / ROLL BARSexpand_more
- SUSPENSIONexpand_more
- TONNEAU COVERS AND BED COVERSexpand_more
- TOWING MIRRORSexpand_more
- TUB LINERS / BED LINERSexpand_more
- WEATHERSHIELDSexpand_more
- WINCHESexpand_more
- WORKSHOPexpand_more
- Brandsexpand_less
- doneaFe Power(3)
Rough Country's 2.5in Suspension Lift features a front and rear set of durable coil spacers, shock extensions, sway bar links and bump stops. This kit is designed to simply enhance the factory components, allowing you to retain your brand new JL shocks and coils to preserve the factory ride just as Jeep engineered it! Rough Country's Jeep JL 2.5in kit features a 100% bolt-on installation process for an easy, no-fuss assembly and includes a Lifetime Replacement Warranty for the ultimate peace of mind.
FEATURES
- Easy bolt-on installation.
- Increased ground clearance.
- Clears up to 35" tires*
NOTES - IMPORTANT
- Fits gas and diesel models.
- 35" tires will clear but rubbing may occur with extreme articulation.
- If planning on running 35" tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links.
- Does NOT fit Mojave models.
- Easy bolt-on installation
- Maintains factory ride quality
- Increased ground clearance
- Levels the front with the rear of the vehicle
- No need to disassemble your struts to install
- Built from aircraft quality T6061 Billet Aluminum
AMTRUX Contour Floor Liners perfectly matches the contours of your truck or SUV and brings together indestructible strength with a soft, comfortable cushion. Add to that a premium look and our exclusive features and you've got liner gold. Punch it, slap it, flick it, kick it. Can you feel it?.
- Our FormFit Design process perfectly forms each liner to the detailed contours of your specific ride.
- Our exclusive StayPut Cleats help keep your liners securely in place.
- No hassle lifetime guarantee.
- Our FormFit Design process perfectly forms each liner to the detailed contours of your specific ride.
- Our patented FormFit Edge is a raised ridge that runs along the door jam, protecting your truck or SUV from all manner of mess.
- Our exclusive StayPut Cleats help keep your liners securely in place.
- With both softness and strength, our rubberized DuraGrip material was designed with comfort in mind.
The Husky Liners X-act Contour perfectly matches the contours of your truck or SUV and brings together indestructible strength with a soft, comfortable cushion. Add to that a premium look and our exclusive features and you've got liner gold. Punch it, slap it, flick it, kick it. Can you feel it?
Our FormFit Design process perfectly forms each liner to the detailed contours of your specific ride.
No hassle lifetime guarantee. For details: HuskyLiners.com/ForLife
Our exclusive StayPut Cleats help keep your liners securely in place.
With both softness and strength, our rubberized DuraGrip material was designed with comfort in mind.
Made in the USA.
MORE AIRFLOW.
MAXIMUM PERFORMANCE
Our cold air intake for the 2020 Silverado 6.2L was engineered to minimize air restriction and flows 51.69% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.
A MONSTER SIZED AIR FILTER
Featuring a massive, highly efficient air filter that snaps into the airbox easily and securely, providing an airtight seal. With our new snap in filter design, you can install and inspect your filter in seconds. Available in either 8-layer Cotton Cleanable or Dry Extendable media.
NEW SNAP IN LID DESIGN
Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim ensures an airtight seal, protecting against unwanted, power-robbing engine heat.
MAF HARNESS EXTENSION
The Mass Airflow Sensor is relocated further down the S&B intake tube allowing for further airflow improvements. We got you covered with our included MAF extension harness.
PREMIUM SILICONE COMPONENTS
The air filter, coupler, lid seal and plug seal are all made with silicone. Silicone is a premium rubber which will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.
THE SOUND
OF PERFORMANCE.
Check out the sound of the intake when installed in the truck. A huge air filter and air box results in a more aggressive sound compared to stock.
Husky Liners form fit Mud Guards are made from durable, impact resistant all-weather thermoplastic that's as tough as nails (or rocks for that matter). They're easy to install, conform perfectly to your fenders, and protect your ride and those around you from the rage of the road.
- Our form fit Mud Guards are tailored to match your fenders perfectly. If only our pants could fit like that.
- No Drilling Required
- Built to the maximum width for full tread coverage of single or dually factory tires. We don't mess around with mess around.
- Our durable, impact resistant all-weather thermoplastic material holds up to whatever the road spits at it.
- The sleek style of our FormFit Mud Guards give your ride a factory look, only better.
- Our Exclusive Husky Shield Film is easy to install and provides an invisible protective barrier between the Mud Guard and the vehicle's paint.
- No hassle lifetime guarantee. For details: HuskyLiners.com/ForLife
- Made in the USA
AMTRUX side steps are a great improvement on STD The extra length and step pad allow easy access to the front of your tub whilst adding a dressed edge to the full length of the cab
Features:
- Highly polished Stainless Steel with Nylon tread areas
- Steel brackets and all fitting hardware
- 5inch oval bar with LARGE Full Width Stomp Pads
- XL Cab Length to access tub
- Curved front end
- Patented Design
The Husky Liners X-act Contour perfectly matches the contours of your truck or SUV and brings together indestructible strength with a soft, comfortable cushion. Add to that a premium look and our exclusive features and you've got liner gold. Punch it, slap it, flick it, kick it. Can you feel it?
Our FormFit Design process perfectly forms each liner to the detailed contours of your specific ride.
No hassle lifetime guarantee. For details: HuskyLiners.com/ForLife
Our exclusive StayPut Cleats help keep your liners securely in place.
With both softness and strength, our rubberized DuraGrip material was designed with comfort in mind.
Made in the USA.
.JPG)
AMTRUX side steps are a great addition to your Trail Boss or other models without factory side steps. The large step pads allow easy access to all doors and the front of your tub whilst adding a dressed edge to the full length of the cab
Features:
- Satin Black finish with Nylon tread areas
- Steel brackets and all fitting hardware
- Patented Design
DETAILS:
Maintain your air filter's optimal performance with regular cleaning and oiling, which is recommended every 40-50k Ks.
- Includes a 5.5oz. Bottle of Oil and a 12oz. Bottle of POWER CLEANER
- Specifically Made for aFe POWER Pro 5R and Pro 10R Air Filters
- Simple Spray On, Rinse Off Cleaner and Easy Re-Oiling
For Pro 5R and Pro 10R Air Filters:
This Restore Kit was specifically developed for aFe POWER's Pro 5R and Pro 10R air filters. The POWER CLEANER effectively breaks down dirt and dust without damaging the media, while the oil captures debris during use.Restoring Air Filters:
Simply apply the cleaner onto the filter element, let it soak, and rinse. Once dry, the oil can be applied. Take care to not over-oil the filter. Refer to the instruction sheet for more information.
Put Nature firmly in its place. The rugged and sporty WeatherBeater Floor Liners perfectly conform to the contours of your ride and offer un-beatable carpet protection for whatever nature hurls at you.
- Our FormFit Design process perfectly forms each liner to the detailed contours of your specific ride.
- No hassle lifetime guarantee. For details: HuskyLiners.com/ForLife
- Our exclusive StayPut Cleats help keep your liners securely in place.
- Made in the USA.
- Contains a spill until you can pull it out, wash it off- good as new!
- Our sporty liner material is rugged and can stand up to abuse like no other.
- Easy to install, remove, and clean.
Husky Liners form fit Mud Guards are made from durable, impact resistant all-weather thermoplastic that's as tough as nails (or rocks for that matter). They're easy to install, conform perfectly to your fenders, and protect your ride and those around you from the rage of the road.
- Our form fit Mud Guards are tailored to match your fenders perfectly. If only our pants could fit like that.
- Built to the maximum width for full tread coverage of single or dually factory tires. We don't mess around with mess around.
- Our durable, impact resistant all-weather thermoplastic material holds up to whatever the road spits at it.
- The sleek style of our FormFit Mud Guards give your ride a factory look, only better.
- Our Exclusive Husky Shield Film is easy to install and provides an invisible protective barrier between the Mud Guard and the vehicle's paint.
- No hassle lifetime guarantee. For details: HuskyLiners.com/ForLife
- Made in the USA
Husky Liners form fit Mud Guards are made from durable, impact resistant all-weather thermoplastic that's as tough as nails (or rocks for that matter). They're easy to install, conform perfectly to your fenders, and protect your ride and those around you from the rage of the road.
- No Drilling Required
- Our form fit Mud Guards are tailored to match your fenders perfectly. If only our pants could fit like that.
- Built to the maximum width for full tread coverage of single or dually factory tires. We don't mess around with mess around.
- Our durable, impact resistant all-weather thermoplastic material holds up to whatever the road spits at it.
- The sleek style of our FormFit Mud Guards give your ride a factory look, only better.
- Our Exclusive Husky Shield Film is easy to install and provides an invisible protective barrier between the Mud Guard and the vehicle's paint.
- No hassle lifetime guarantee. For details: HuskyLiners.com/ForLife
- Made in the USA.
Airflow Improvement: +51.83%
Efficiency Rating: 99.05%
MAXIMUM PERFORMANCE
Our cold air intake for the 2020-2021 Silverado / Sierra Duramax L5P 6.6L was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.
NEW SNAP IN LID DESIGN
Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim provides a protective seal against unwanted, power-robbing engine heat and debris. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.
PREMIUM SILICONE COMPONENTS
The air filter, coupler, lid seal and box plug are all made with silicone. Silicone is a premium rubber that will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.
CHOOSE YOUR AIRFLOW
More air equals better performance. The Duramax L5P 6.6L intake features three air inlet points. If you want to customize the amount of air you take in, we provide an optional box plug that can seal off one inlet point.
NO CHECK ENGINE LIGHTS
S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights with it's properly mapped Mass Air Flow Sensor.
REQUIRES MODIFICATION DUE TO CONVERSION
S&B Filters Cotton Filter Cold Air Intake Kits
S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow S&B oiled cotton filters are built with four or eight layers (for diesels) of the highest-quality cotton gauze. They use deeper and wider pleats with more pleats per filter. Plus, their manufacturing process yields filters with almost no "bleed", creating a greater open surface area. All of this adds up to more surface area per filter, and that means more airflow with excellent protection. All S&B cotton air filters are washable and reusable and will protect your engine from harmful dirt and debris.
Your rig will not only gain performance, but also a sporty high-tech appearance under the hood. In addition, the filters and couplers are made with silicone rubber, not urethane, to help ensure they won't degrade or crack and can resist temperatures as high as 400 degrees F. These intake kits are simple to install, and the great looking signature clear lid allows visual inspection of your filter at all times. Remember, there are good air intakes ... and then there are the better intakes--demand the better; choose the efficiency and style of S&B Filters cold air intake kits.
Features include:
* Helps balance air/fuel ratios to improve gas mileage
* Specially-crafted cross-linked intake tube minimizes restriction
* Custom air box keeps loose dirt and turbulent under hood air out of your intake
* Custom-made for your specific year, make, and model
* Easy-to-use installation instructions and illustrations
Note: This cold air intake fits the eTorque models.
Vehicle Fitment:
- 2018-2020 JEEP JL WRANGLER & JT GLADIATOR
Product Features:
- Proudly Made in Texas, USA
- 3/16 inch Heavy Duty Steel Construction
- 1/4 inch Gusseting and Internal Bracketry
- CNC Laser Cut
- Precision Brake Formed
- Welded by Craftsmen inside and out
- Direct Bolt On Design
- License plate lights included
- Light Ports for LED Backup Lights
- Raw Unfinished Steel
- Lifetime Structural Warranty
- *Lights are not included
Performance Level
We're proud to announce the FIRST Australian made full twin 3in system to suit the RAM 1500 5.7L HEMI V8.
Featuring a set of 1 3/4in primary 4-into-1 headers, with 3in outlets (available with ceramic coating)
Full twin 3in system with H-pipe, and hotdog + muffler centre
Tailpipes with 5in chrome tips (available with black tips also)
Awesome V8 sound
Our full system routes the exhaust away from the transmission, behind the crossmember, thus eliminating the issue of the exhaust contributing to the transmission temperature. Our catback system goes off the back of the factory Y-pipe, so therefore does not alter this area at all.
Airflow Improvement: 40.63%
Efficiency Rating: 99.89%
MAXIMUM PERFORMANCE
Our cold air intake for the 2019-2021 Ram 2500/3500 6.7L was engineered to minimize air restriction and flow better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.
NEW SNAP IN LID DESIGN
Our new snap-In lid design requires no screws to secure it to the box. This makes installation and inspection quick and easy. Our silicone edge trim provides a protective seal against unwanted, power-robbing engine heat and debris. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.
PREMIUM SILICONE COMPONENTS
The air filter, coupler, lid seal and box plug are all made with silicone. Silicone is a premium rubber which will seal better and last longer. It handles temperatures as high as 400F without cracking or tearing and won't deteriorate over time.
NO CHECK ENGINE LIGHTS
S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. This kit was designed to avoid check engine lights. Featuring an injection Molded MAF (Mass Air Flow) plate and IAT (Intake Air Temperature) that ensures true o-ring seal to the sensor.
RAM AIR SCOOP FITMENT SEALS BETTER THAN STOCK
The factory scoop attachment uses plastic snap in features to secure the scoop to the airbox, which can result in airflow loss. The S&B scoop seal has a rubberized seal fitment that compresses into the stock scoop resulting is less airflow loss.
Extreme Level
We're proud to announce the FIRST Australian made full twin 3in system to suit the RAM 1500 5.7L HEMI V8.
Featuring a set of 1 3/4in primary 4-into-1 headers, with 3in outlets (available with ceramic coating)
Full twin 3in system with H-pipe, and hotdog + muffler centre
Tailpipes with 5in chrome tips (available with black tips also)
Awesome V8 sound - check out the videos!
Our full system routes the exhaust away from the transmission, behind the crossmember, thus eliminating the issue of the exhaust contributing to the transmission temperature. Our catback system goes off the back of the factory Y-pipe, so therefore does not alter this area at all.
Extreme Level
We're proud to announce the FIRST Australian made full twin 3in system to suit the RAM 1500 5.7L HEMI V8.
Featuring a set of 1 3/4in primary 4-into-1 headers, with 3in outlets (available with ceramic coating)
Full twin 3in system with H-pipe, and hotdog + muffler centre
Tailpipes with 5in chrome tips (available with black tips also)
Awesome V8 sound - check out the videos!
Our full system routes the exhaust away from the transmission, behind the crossmember, thus eliminating the issue of the exhaust contributing to the transmission temperature. Our catback system goes off the back of the factory Y-pipe, so therefore does not alter this area at all.
Touring and Towing Level
We're proud to announce the FIRST Australian made full twin 3in system to suit the RAM 1500 5.7L HEMI V8.
Featuring a set of 1 3/4in primary 4-into-1 headers, with 3in outlets (available with ceramic coating)
Full twin 3in system with H-pipe, and hotdog + muffler centre
Tailpipes with 5in chrome tips (available with black tips also)
Awesome V8 sound
Our full system routes the exhaust away from the transmission, behind the crossmember, thus eliminating the issue of the exhaust contributing to the transmission temperature. Our catback system goes off the back of the factory Y-pipe, so therefore does not alter this area at all.
- 20-Current Gladiator JT
- Wrangler JL, 2 and 4 door
- Premium 5-stage satin black powder-coat finish
- 3/16 inch heavy duty steel construction
- 1/4 inch gusseting and internal bracketry
- CNC laser cut
- Precision brake formed
- Bolt-on application
- Superior foot forward winch mount
- Mount fits a WARN M12000 or Smittybilt XRC
- Recessed light ports for auxiliary lighting
- Winch and auxilary ights are not included
- Made in the USA
- Lifetime structural warranty
Performance Level
We're proud to announce the FIRST Australian made full twin 3in system to suit the RAM 1500 5.7L HEMI V8.
Featuring a set of 1 3/4in primary 4-into-1 headers, with 3in outlets (available with ceramic coating)
Full twin 3in system with H-pipe, and hotdog + muffler centre
Tailpipes with 5in chrome tips (available with black tips also)
Awesome V8 sound
Our full system routes the exhaust away from the transmission, behind the crossmember, thus eliminating the issue of the exhaust contributing to the transmission temperature. Our catback system goes off the back of the factory Y-pipe, so therefore does not alter this area at all.
Extreme Level
Our exhaust suits all variants, including the factory-backed ASV RHD conversions, and the SCD conversion which retains the original steering column position.
The Manta Exhaust for the DT RAM 1500 features the following:
Featuring a set of 1 3/4in primary 4-into-1 headers, with 3in outlets (available with ceramic coating)
Full twin 3in system with H-pipe, and hotdog + muffler centre
Tailpipes with 5in chrome tips (available with black tips also)
Awesome V8 sound
Our full system routes the exhaust away from the transmission, behind the crossmember, thus eliminating the issue of the exhaust contributing to the transmission temperature. Our catback system goes off the back of the factory Y-pipe, so therefore does not alter this area at all.
Touring and Towing Level
Our exhaust suits all variants, including the factory-backed ASV RHD conversions, and the SCD conversion which retains the original steering column position.
The Manta Exhaust for the DT RAM 1500 features the following:
Featuring a set of 1 3/4in primary 4-into-1 headers, with 3in outlets (available with ceramic coating)
Full twin 3in system with H-pipe, and hotdog + muffler centre
Tailpipes with 5in chrome tips (available with black tips also)
Awesome V8 sound
Our full system routes the exhaust away from the transmission, behind the crossmember, thus eliminating the issue of the exhaust contributing to the transmission temperature. Our catback system goes off the back of the factory Y-pipe, so therefore does not alter this area at all.
- 20-Current Gladiator JT
- Wrangler JL, 2 & 4 door
- Premium 5-stage satin black powder-coat finish
- 3/16 inch heavy duty steel construction
- 1/4 inch gusseting and internal bracketry
- Pre-runner guard
- CNC laser cut
- Precision brake formed
- Bolt-on application
- Superior foot forward winch mount
- Mount fits a WARN M12000, Smittybilt XRC
- Recessed light ports for auxiliary lighting
- Winch and Lights are not included
- Lifetime structural warranty
- Made in the USA
Touring and Towing Level
We're proud to announce the FIRST Australian made full twin 3in system to suit the RAM 1500 5.7L HEMI V8.
Featuring a set of 1 3/4in primary 4-into-1 headers, with 3in outlets (available with ceramic coating)
Full twin 3in system with H-pipe, and hotdog + muffler centre
Tailpipes with 5in chrome tips (available with black tips also)
Awesome V8 sound
Our full system routes the exhaust away from the transmission, behind the crossmember, thus eliminating the issue of the exhaust contributing to the transmission temperature. Our catback system goes off the back of the factory Y-pipe, so therefore does not alter this area at all.
Performance Level
We're proud to announce the FIRST Australian made full twin 3in system to suit the RAM 1500 5.7L HEMI V8.
Featuring a set of 1 3/4in primary 4-into-1 headers, with 3in outlets (available with ceramic coating)
Full twin 3in system with H-pipe, and hotdog + muffler centre
Tailpipes with 5in chrome tips (available with black tips also)
Awesome V8 sound
Our full system routes the exhaust away from the transmission, behind the crossmember, thus eliminating the issue of the exhaust contributing to the transmission temperature. Our catback system goes off the back of the factory Y-pipe, so therefore does not alter this area at all.
